SMF100AQ

SUNCOYJ
RoHS SMF5.0AQ THRU SMF100AQ COMPLIANT Surface Mount Transient Voltage Suppressor Features ● For surface mounted applications ● Low-profile package ● Ideal for automated placement Uni-directional ● Available in Unidirectional ● 200 W peak pulse power capability with a 10/1000 μs waveform ● Low incremental surge resistance, excellent clamping capability ● Very fast response time ● High tempe...
развернуть ▼ свернуть ▲
 

Технические характеристики

показать свернуть
Корпус SOD123FL
Рассеиваемая мощность
Пиковая рассеиваемая мощность
Рабочее напряжение
Напряжение ограничения (номинальное)
Напряжение ограничения (диапазон)
Максимальное импульсное напряжение
Ток утечки при рабочем напряжении
Максимальный импульсный ток
Тип супрессора по свойствам
Количество линий ограничения
Примечание Trans Voltage Suppressor Diode
Нашли ошибку? Выделите её курсором и нажмите CTRL + ENTER

Аналоги 9

показать свернуть
Тип Наименование Корпус Упаковка i Pрасс Pрасс(пик) Uраб Uогр(ном) Uогр(диапазон) Uимп(макс) Iраб Iимп(макс) Тип Линий Cперех Примечание Карточка
товара
A- SMAJ100AQ (YJ)
 
—
 
 — Trans Voltage Suppressor Diode
A- SMBJ100A (YJ)
 

SMBJ100A (DIODES) 		DO214AA в ленте 3000 шт
 
 — Trans Voltage Suppressor Diode, 100V V(RWM), Unidirectional
A- SMBJ100AQ (YJ)
 
—
 
 — Trans Voltage Suppressor Diode
A- SMF100A (YJ)
 
SOD123FL 3000 шт
 
 — Trans Voltage Suppressor Diode
A- SMA6J100AQ (YJ)
 
DO214AC
 
 — Trans Voltage Suppressor Diode
A- SMCJ100A (YJ)
 

SMCJ100A/TR7 (YAG)
SMCJ100A (ONS-FAIR) 		DO214AB в ленте 3000 шт
 
 — Trans Voltage Suppressor Diode, 1500W, 100V V(RWM), Unidirectional, 1 Element, Silicon, DO-214AB
A- SMCJ100AQ (YJ)
 
—
 
 — Trans Voltage Suppressor Diode
A- SMAJ100A/TR13 (YAG)
 
DO-214AC DO-214AC (SMA) — SMAJ, DO-214AC, 100V, 162V, Reel 13"
A- SMBJ100A-AT/TR13 (YAG)
 
— — SMBJ, DO-214AA, 100V, 162V, AUTO, Reel 13"

Файлы 2

показать свернуть
RoHS SMF5.0AQ THRU SMF100AQ COMPLIANT Surface Mount Transient Voltage Suppressor Features ● For surface mounted applications ● Low-profile package ● Ideal for automated placement Uni-directional ● Available in Unidirectional ● 200 W peak pulse power capability with a 10/1000 μs waveform ● Low incremental surge resistance, excellent clamping capability ● Very fast response time ● High temperature soldering guaranteed: 260 °C/10 s at terminals ● Meets MSL level 1 ● Part no. with suffix “Q” means AEC-Q101 qualified Typical Applications Use in sensitive electronics protection against voltage transients induced by inductive load switching and lighting on ICs, MOSFET, signal lines of sensor units for consumer, computer, industrial, automotive and telecommunication. Mechanical Date ● Package: SOD-123FL Molding compound meets UL 94 V-0 flammability rating, RoHS-compliant, halogen-free ● Terminals: Tin plated leads, solderable per J-STD-002 and JESD22-B102 ● Polarity: For uni-directional types the band denotes cathode end ■Maximum Ratings (Ta=25℃ Unless otherwise specified） PARAMETER SYMBOL UNIT Conditions Max PPPM W with a 10/1000us waveform 200 IPPM A with a 10/1000us waveform (See Next Table) Power dissipation, on infinite heat sink PD W Ta=55℃ 0.4 Peak forward surge current, 8.3 ms single (3) IFSM A 8.3 ms single half sine-wave 20 TJ ℃ - -55 to +175 TSTG ℃ - -55 to +175 Between junction and lead 26 Between junction and Ambient 300 Between junction and Curve 40 Peak power dissipation(1) Peak pulse current (2) (Fig.1) (1) Operating junction and Storage temperature range RθJL Thermal resistance RθJA ℃/W RθJC Notes: (1). Non-repetitive current pulse at TJ =25℃，per waveform of Fig3. (2). TL=30℃ unless otherwise noted , VF ≤1.25V@200mA. (3). Measured on 8.3 ms single half sine-wave or equivalent square wave, duty cycle = 4 pulses per minute maximum 1/5 S-S3721 Rev.1.4,27-Oct-22 Yangzhou Yangjie Electronic Technology Co., Ltd. www.21yangjie.com PDF
Документация на SMF100AQ 

Microsoft Word - SMF5.0AQ THRU SMF100AQ

Дата модификации: 27.10.2022

Размер: 285.2 Кб

5 стр.

RoHS SMF7AQ THRU SMF100AQ COMPLIANT Surface Mount Transient Voltage Suppressor Uni-directional Features ● For surface mounted applications ● Low-profile package ● Ideal for automated placement ● Available in Unidirectional and Bidirectional ● 200 W peak pulse power capability with a 10/1000 μs waveform ● Low incremental surge resistance, excellent clamping capability ● Very fast response time ● High temperature soldering guaranteed: 260 °C/10 s at terminals ● Meets MSL level 1 ● Part no. with suffix “Q” means AEC-Q101 qualified Bi-directional Typical Applications Use in sensitive electronics protection against voltage transients induced by inductive load switching and lighting on ICs, MOSFET, signal lines of sensor units for consumer, computer, industrial, automotive and telecommunication. Mechanical Date ● Package: SOD-123FL Molding compound meets UL 94 V-0 flammability rating, RoHS-compliant, halogen-free ● Terminals: Tin plated leads, solderable per J-STD-002 and JESD22-B102 ● Polarity: For uni-directional types the band denotes cathode end ■Maximum Ratings (Ta=25℃ Unless otherwise specified） PARAMETER SYMBOL UNIT Conditions Max PPPM W with a 10/1000us waveform 200 Peak pulse current(1) IPPM A with a 10/1000us waveform (See Next Table) Power dissipation, on infinite heat sink PD W TL=75℃ 0.4 IFSM A 20 TJ,TSTG ℃ -55 to +150 Peak power dissipation(1) (2) (Fig.1) Peak forward surge current, 8.3 ms single half sine-wave unidirectional only (3) Operating junction and storage temperature range RθJL Thermal resistance RθJA RθJC ℃/W Between junction and lead 26 Between junction and Ambient 300 Between junction and Curve 40 1/5 S-S3721 Rev.1.0,08-Mar-21 Yangzhou Yangjie Electronic Technology Co., Ltd. www.21yangjie.com PDF
Документация на SMF100AQ 

Microsoft Word - SMF7AQ THRU SMF100AQ

Дата модификации: 08.03.2021

Размер: 220.7 Кб

5 стр.

    Внимание! Точность указанного на сайте описания товара не может быть гарантирована. Для получения более полной и точной информации о товаре смотрите техническое описание (Datasheet) на сайте производителя.

    1.5KE10CA (YJ)