AD8628ARTZ

UMW
UMW R AD8628/AD8629/AD8630 Zero-Drift, Single-Supply, Rail-to-Rail Input/Output Operational Amplifier PIN CONFIGURATIONS GENERAL DESCRIPTION This amplifier has ultralow offset, drift, and bias current. The AD8628/AD8629/AD8630 are wide bandwidth auto-zero amplifiers featuring rail-to-rail input and output swing and low noise. Operation is fully specified from 2.7 V to 5 V single supply (±1....
развернуть ▼ свернуть ▲
 

Технические характеристики

показать свернуть
Корпус SOT235
Тип ОУ
Техническая особенность ОУ
Кол-во каналов ОУ
Напряжение питания
Ток собственного потребления
Rail-to-Rail выводы
Программируемый коэффициент усиления
Частота единичного усиления
Максимальная скорость нарастания выходного сигнала
Уровень шума
Диапазон рабочих температур
Примечание Zero-Drift, Single-Supply, Rail-to-Rail Input/Output Operational Amplifier
Нашли ошибку? Выделите её курсором и нажмите CTRL + ENTER

Файлы 1

показать свернуть
UMW R AD8628/AD8629/AD8630 Zero-Drift, Single-Supply, Rail-to-Rail Input/Output Operational Amplifier PIN CONFIGURATIONS GENERAL DESCRIPTION This amplifier has ultralow offset, drift, and bias current. The AD8628/AD8629/AD8630 are wide bandwidth auto-zero amplifiers featuring rail-to-rail input and output swing and low noise. Operation is fully specified from 2.7 V to 5 V single supply (±1.35 V to ±2.5 V dual supply). The AD8628/AD8629/AD8630 provide benefits previously found only in expensive auto-zeroing or chopper-stabilized amplifiers. With an offset voltage of only 1 µV, drift of less than 0.005 μV/°C, and noise of only 0.5 µV p-p (0 Hz to 10 Hz), the AD8628/ AD8629/AD8630 are suited for applications where error sources cannot be tolerated. Position and pressure sensors, medical equipment, and strain gage amplifiers benefit greatly from nearly zero drift over their operating temperature range. Many systems can take advantage of the rail-to-rail input and output swings provided by the AD8628/AD8629/AD8630 to reduce input biasing complexity and maximize SNR. OUT 1 V– 2 AD8628 5 V+ 4 –IN TOP VIEW (Not to Scale) +IN 3 SOT23-5 NC 1 AD8628 –IN 2 8 NC 7 V+ 6 OUT TOP VIEW (Not to Scale) 5 NC +IN 3 V– 4 SOP-8 OUT A 1 –IN A 2 +IN A 3 V– 4 AD8629 8 V+ 7 OUT B TOP VIEW 6 –IN B (Not to Scale) 5 +IN B SOP-8 FEATURES • • • • • • • • • • Lowest auto-zero amplifier noise Low offset voltage: 1 µV Input offset drift: 0.002 µV/°C Rail-to-rail input and output swing 5 V single-supply operation High gain, CMRR, and PSRR: 130 dB Very low input bias current: 100 pA maximum Low supply current: 1.0 mA Overload recovery time: 50 µs No external components required OUT A 1 14 OUT D –IN A 2 13 –IN D 12 +IN D +IN A 3 V+ 4 +IN B 5 –IN B 6 OUT B 7 AD8630 TOP VIEW 11 V– (Not to Scale) 10 +IN C 9 –IN C 8 OUT C SOP-14/TSSOP-14 APPLICATIONS • • • • • • • Automotive sensors Pressure and position sensors Strain gage amplifiers Medical instrumentation Thermocouple amplifiers Precision current sensing Photodiode amplifiers www.umw-ic.com 1 UTD Semiconductor Co.,Limited PDF
Документация на AD8628ARTZ 

UMW AD86xx

Дата модификации: 18.07.2024

Размер: 1.19 Мб

18 стр.

    Внимание! Точность указанного на сайте описания товара не может быть гарантирована. Для получения более полной и точной информации о товаре смотрите техническое описание (Datasheet) на сайте производителя.

    MS3121 (RUIMENG)