Серия магниточувствительных датчиков CH913

Cosemi

Общие характеристики

 Раздел Датчик магниточувствительный
Тип датчика
Рабочая температура
Применение Фиксация приближения магнита (датчик вскрытия порогового магнитного поля)

Документация на серию CH913

Cosemitech CH913/CH913L Automotive Product Group This is advanced information on a new product now in development or undergoing evaluation. Details are subject to change without notice and Cosemitech assumes no obligation for future manufacture of this product. Contact Cosemitech for the latest status. Preliminary Datasheet 1.8 FEATURES and FUNCTIONAL DIAGRAM • • • • • • • • • • Micro-power Omnipolar-Switch Hall Sensor Multiple Sensitivity Options (BOP / BRP): ±35 / ±25 Gauss; Open Drain output ability Chopper stabilized design provides: - Superior temperature stability - Minimal switch point drift - Enhanced immunity to physical stress On board voltage regulator for 1.8V to 5.5V range Open Drain Output (1 mA Sink) Solid-state reliability Wide Operating temperature range: -40 to 150 oC Small package sizes TO-92S, SOT-23 RoHS-compliant material meets directive 2011/65/EU PACKAGE ⚫ TO-92S SOT-23-3L APPLICATIONS -Open and Close Detect for Flip/Slide Cellular Phones； -Smart Cover or Dock Detect for Cellular Phones and Tablet PCs; -Cover or Display Switch in Portable PCs (eg: Ultrabook); Digital Still, Video Cameras and Handheld Gaming Consoles； -Door, Lids and Tray Position Switches； -Level, Proximity and Position Switches； -Contact-Less Switches in Home Appliances and Industrial Applications. DESCRIPTION The CH913/CH913L is a high-sensitivity extremely temperature-stable micro-power Omnipolar Hall effect switch IC with internal pull down capability. Designed for portable and battery powered consumer equipment such as cellular phones and portable PCs to office equipment, home appliances and industrial applications, the average supply current is only 1.62μA at 3.3V for CH913 and 0.92uA at 3.3V for CH913L. To support potable equipment the CH913/CH913L can operate over the supply range of 1.8V to 5.5V and uses a hibernating clocking system to minimize the power consumption. The device includes a clocking system, a Hall-voltage generator, a small-signal amplifier, a chopper stabilization, two Schmitt trigger, and an output driver controller. The output is activated with either a north or south pole of sufficient magnetic field strength. When the magnetic flux density (B) perpendicular to the package is larger than operate point (Bop), the output will be turned on (pulled low) and held until B is lower than release point (Brp). Two package styles provide a magnetically optimized package for most applications, SO-T23 and TO92S. Each package type is lead (Pb) free (suffix, –T), with a 100% matte-tin-plated leadframe. Page 1/10 PDF
Документация на CH913SR 

CH913_Datasheet

Дата модификации: 28.09.2021

Размер: 627.4 Кб

10 стр.

    Товары серии CH913

    Наименование i Упаковка Корпус Монтаж
    CH913SR (COSEMI)
     
     
    		 в ленте 3000 шт SOT233L
    CH913TB (COSEMI)
     
     
    		 30 шт TO92S

    CH913 публикации

    19 сентября 2023
    новость

    Датчики Cosemi появились на складе КОМПЭЛ

    На склад пришла партия датчиков Холла известного китайского бренда Cosemi. Среди поступившей продукции: простые датчики магнитного поля; датчики магнитного поля с линейным выходом; датчики тока с линейным выходом. Датчики магнитного поля с... ...читать