Серия AC-DC сетевых преобразователей LMF600-20B

Общие характеристики

Раздел AC-DC сетевые преобразователи
Выходная мощность (ном)
Тип стабилизации
Вход
Конструктивное исполнение
Возможности ККМ, функция Remote On/Off, Remote Sense, выход Standby
Типы защиты КЗ, перегрузка, перегрев, перенапряжение
Количество выходов
Тип управления выходом
Исполнение
Входное напряжение AC
Входное напряжение DC
Коэффициент мощности
Напряжение изоляции вход-выход
Применение
Размер 203.1×101.6×40.6 мм
Рабочая температура

Документация на серию LMF600-20B

AC/DC 600W Enclosed Switching Power Supply LMF600-20Bxx Series FEATURES  Universal 80 - 277VAC or 110- 390VDC Input voltage  Accepts AC or DC input (dual-use of same terminal)  Operating ambient temperature range: -40℃ to +70℃  Low standby power consumption, high efficiency, active PFC  High I/O isolation test voltage up to 4000VAC  The base plate with conformal coating Report  Output short circuit, over-current, over-voltage over-temperature protection RoHS EN62368-1 GB4943.1  Remote sense compensation, remote ON/OFF function  DC_OK function  With 5V/1A standby power  Operating altitude up to 5000m LMF600-20Bxx series is one of Mornsun’s enclosed AC-DC switching power supply. It features universal AC input and at the same time accepts DC input voltage, cost-effective, low no load power consumption, high efficiency, high reliability and double or reinforced insulation. These converters offer excellent EMC performance and meet IEC/EN/UL62368, EN60335, EN61558, IEC/EN60601, GB4943 standards and they are widely used in areas of industrial, LED, street light control, electricity, security, telecommunications, smart home etc. Selection Guide Nominal Output Voltage and Current (Vo/Io)* Output Voltage Adjustable Range (V) LMF600-20B12 12V/50A 11.8-12.6 LMF600-20B15 15V/40A 14.7-15.8 24V/25A 23.5-25.2 27V/22.3A 26.4-28.4 LMF600-20B36 36V/16.7A 35.3-37.8 LMF600-20B48 48V/12.6A 47.0-50.4 Certification EN/CCC Part No. LMF600-20B24 LMF600-20B27 Output Power (W) 600 Max. Remote Sense Efficiency at Standby Capacitive Compensation 230VAC (%) Typ. (Vo/Io)* Load (µF) (mV) 92 6000 4000 94 500 5V/1A 2400 1600 Note: 1.*Under any conditions, the total power of the product should not exceed the 600W rated power, and the output current cannot exceed the rated output current; 2.*Standby power: provide 5V/1A independent output, it is recommended to use with the main circuit. Input Specifications Item Input Voltage Range Operating Conditions Min. Typ. Max. Unit AC input 80 -- 277 VAC DC input 110 -- 390 VDC 47 -- 63 Hz -- -- 7.5 -- -- 3.5 -- 40 -- -- 0.98 -- -- 0.95 -- Input Voltage Frequency Input Current Inrush Current Power Factor Leakage Current Hot Plug 115VAC 230VAC 230VAC 115VAC 230VAC 240VAC Cold start Full load A -- <0.1mA Unavailable 2021.11.03-A/3 Page 1 of 5 MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final interpretation PDF
Документация на серию LMF600-20B 

LMF600-20Bxx_EN Keywords:

Дата модификации: 09.11.2022

Размер: 335.6 Кб

5 стр.

    Товары серии LMF600-20B

    Наименование i Упаковка Выход U1 I1 КПД
    LMF600-20B12 (MORNSUN)
     
    LMF600-20B15 (MORNSUN)
     
    LMF600-20B24 (MORNSUN)
     
    1 шт
    LMF600-20B27 (MORNSUN)
     
    LMF600-20B48 (MORNSUN)
     
    1 шт