Серия DC-DC модульных преобразователей VCB48_EBO-100WR3

Mornsun

Общие характеристики

 Раздел DC-DC модульные преобразователи
Монтаж
Выходная мощность
Количество каналов
Входное напряжение
Возможности
Комплекс защит КЗ, перегрузка, от пониженного входного напряжения
Номинальное входное напряжение
Схема параллельного включения
Напряжение изоляции вход-выход
Сертификаты медицинские
Размер 58.42×22.86×9.69 мм
Рабочая температура

Документация на серию VCB48_EBO-100WR3

DC/DC Converter VCB48_EBO-100W(F)R3 Series FEATURES 100W isolated DC-DC converter Wide input and regulated single output  Wide input voltage range: 36-75 VDC  High efficiency up to 93%  I/O isolation test voltage 1.5K VDC  Operating ambient temperature range: -40℃ to +100℃  Input under-voltage protection, output short circuit, over-current, over–voltage protection, over-temperature protection Patent Protection RoHS  Industry standard package: 1/8 brick  Meet IEC/UL/EN62368 standard VCB48_EBO-100W(F)R3 series of isolated 100W DC-DC converter products with an wide 2:1 input voltage range. They feature efficiencies up to 93%, input to output isolation is tested with 1500VDC and the converter safety operate ambient temperature of -40℃ to +100℃, input under-voltage protection, output over-voltage, over-current, short-circuit protection, over-temperature protection. They are ideally and widely used in applications such as industrial control, electric power, instruments and communications. Selection Guide Part No. Certification Input Voltage (VDC) ① VCB4805EBO-100W(F)R3 VCB4812EBO-100W(F)R3 -- VCB4815EBO-100W(F)R3 VCB4824EBO-100W(F)R3 VCB4828EBO-100W(F)R3 Nominal (Range) 48 (36-75) 48 (36-75) 48 (36-75) 48 (36-75) 48 (36-75) Output Full Load ③ Efficiency (%) Min./Typ. Capacitive Load (µF)Max. Max. Voltage (VDC) Current(A) Max./Min. 75 5 20/0 90/92 6000 75 12 8.3/0 91/93 2000 75 15 6.67/0 91/93 2000 75 24 4.17/0 90/92 1000 75 28 3.57/0 90/92 1000 ② Notes： 1 Use “F” suffix for heat sink mounting. We recommend to choose modules with a heat sink for enhanced heat dissipation and applications with extreme temperature requirements; 2 Exceeding the maximum input voltage may cause permanent damage; 3 Efficiency is measured in nominal input voltage and rated output load. Input Specifications Item Input Current (full load / no-load) Reflected Ripple Current Operating Conditions Nominal input voltage Surge Voltage (1sec. max.) Min. Typ. Max. -- 2264/20 2315/30 -- 30 100 Unit mA -0.7 -- 80 VDC Start-up Voltage -- -- 36 VDC Start-up Current -- -- 5 A Input Under-voltage Protection 26 29 -- VDC -- -- 100 ms Start-up Time Nominal input voltage & constant resistance load Input Filter π filter Unavailable Hot Plug Ctrl ① Module on Ctrl pin open or pulled high (TTL 3.5-12VDC) Module off Ctrl pin pulled low to GND (0-1.2VDC) Input current when off -- 3 10 mA Note: ①The Ctrl pin voltage is referenced to input GND. 2021.06.15-A/2 Page 1 of 9 MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final interpretation PDF
Документация на серию VCB48_EBO-100WR3 

VCB48_EBO-100WR3 Keywords:

Дата модификации: 23.06.2021

Размер: 2.9 Мб

9 стр.

    Товары серии VCB48_EBO-100WR3

    Наименование i Упаковка Выход U1 I1 КПД
    VCB4805EBO-100WR3 (MORNSUN)
     
    VCB4812EBO-100WR3 (MORNSUN)
     
    VCB4815EBO-100WR3 (MORNSUN)
     
    VCB4824EBO-100WR3 (MORNSUN)
     
    VCB4828EBO-100WR3 (MORNSUN)