Серия AC-DC сетевых преобразователей HSN-200

MEAN WELL

Общие характеристики

 Раздел AC-DC сетевые преобразователи
Тип стабилизации
Конструктивное исполнение
Возможности
Типы защиты КЗ, перегрузка, перенапряжение, перегрев
Исполнение
Коэффициент мощности
Напряжение изоляции вход-выход
Напряжение изоляции вход-земля
Напряжение изоляции выход-земля
Применение
КПД
Шум
Размер 210×62×31 мм
Рабочая температура
Количество выходов
Входное напряжение DC

Документация на серию HSN-200

HSN-200 200W Single Output Switching Power Supply series ■ ‧ ‧ ‧ ‧ ‧ ‧ ‧ ‧ ‧ SPECIFICATION HSN-200-4.2A HSN-200-4.2B HSN-200-5A HSN-200-5B 4.2V 4.2V 5V 5V Note.2 30A 40A 30A 40A 0 ~ 40A 0 ~ 30A 0 ~ 40A 126W RATED POWER(convection) RIPPLE & NOISE (max.) Note.3 150mVp-p 168W 150mVp-p 150W 150mVp-p 200W 150mVp-p VOLTAGE ADJ. RANGE 3.6~4.4V ±2.0% 4.5~5.5V ±2.0% 4.5~5.5V ±2.0% ±0.5% ±0.5% ±0.5% ±2.0% ±2.0% ±2.0% MODEL DC VOLTAGE RATED CURRENT CURRENT RANGE OUTPUT INPUT 0 ~ 30A 3.6~4.4V VOLTAGE TOLERANCE Note.4 ±2.0% ±0.5% LINE REGULATION ±2.0% LOAD REGULATION SETUP, RISE TIME 1500ms, 100ms/230VAC HOLD UP TIME (Typ.) 20ms/230VAC VOLTAGE RANGE FREQUENCY RANGE EFFICIENCY (Typ.) 90~132VAC or 254~373VDC 47 ~ 63Hz 86.5% AC CURRENT (Typ.) INRUSH CURRENT (Typ.) 3.0A/115VAC 2.5A/230VAC COLD START <80A(twidth<1000μs measured at 50% Ipeak) at 115/230VAC LEAKAGE CURRENT 2500ms, 100ms/115VAC 16ms/115VAC at full load 180~264VAC or 254~373VDC 88% PROTECTION SHORT CIRCUIT 180~264VAC or 254~373VDC 86.5% 88% <1mA A Type:105~185% rated output power OVERLOAD 90~132VAC or 254~373VDC B Type:105~140% rated output power Protection type : Hiccup mode, recovers automatically after fault condition is removed Protection type : Hiccup mode, recovers automatically after fault condition is removed OVER VOLTAGE 5.7 ~ 7.0V 4.6 ~ 5.4V Protection type : Hiccup mode, recovers automatically after fault condition is removed OVER TEMPERATURE WORKING TEMP. Shut down O/P voltage, recovers automatically after temperature goes down -25 ~ +70℃(Refer to "Derating Curve") 20 ~ 90% RH non-condensing WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY -40 ~ +85℃, 10 ~ 95% RH ±0.03%/℃ (0 ~ 60℃) TEMP. COEFFICIENT 10 ~ 500Hz, 3G 10min./1cycle, 60min. each along X, Y, Z axes VIBRATION SAFETY & EMC (Note 5) SAFETY STANDARDS WITHSTAND VOLTAGE UL60950-1, EAC TP TC 004 approved ISOLATION RESISTANCE EMC EMISSION I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC/25℃/ 70%RH Refer to EN55022 (CISPR22) Class A, EAC TP TC 020 Refer to EN61000-4-5; 4KV, criteria A, EAC TP TC 020 EMC IMMUNITY MTBF OTHERS NOTE DIMENSION PACKING I/P-O/P:3.0KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC 283.069K hrs min. MIL-HDBK-217F (25℃) 210*62*31mm (L*W*H) 0.55kg; 20pcs/12kg/1.63CUFT ℃       ※ Product Liability Disclaimer：For detailed information, please refer to https://www.meanwell.com/serviceDisclaimer.aspx File Name:HSN-200-SPEC 2020-09-27 PDF
Документация на HSN-200-5B 

未命名 -1

Дата модификации: 28.09.2020

Размер: 588.4 Кб

3 стр.

HSN-200 200W Single Output Switching Power Supply series ■ Features : Low leakage current<1mA Protections: Short circuit / Overload / Over voltage / Over temperature Cooling by aluminum plate or the cabinet Low profile:31mm Conformal coated LED indicator for power on Low cost, high power reliability 100% full load burn-in test 2 years warranty SPECIFICATION HSN-200-4.2A HSN-200-4.2B HSN-200-5A HSN-200-5B 4.2V 4.2V 5V 5V Note.2 30A 40A 30A 40A 0 ~ 40A 0 ~ 30A 0 ~ 40A 126W RATED POWER(convection) RIPPLE & NOISE (max.) Note.3 150mVp-p 168W 150mVp-p 150W 150mVp-p 200W 150mVp-p VOLTAGE ADJ. RANGE 3.6~4.4V ±2.0% 4.5~5.5V ±2.0% 4.5~5.5V ±2.0% ±0.5% ±0.5% ±0.5% ±2.0% ±2.0% ±2.0% MODEL DC VOLTAGE RATED CURRENT CURRENT RANGE OUTPUT INPUT 0 ~ 30A 3.6~4.4V VOLTAGE TOLERANCE Note.4 ±2.0% ±0.5% LINE REGULATION ±2.0% LOAD REGULATION SETUP, RISE TIME 1500ms, 100ms/230VAC HOLD UP TIME (Typ.) 20ms/230VAC VOLTAGE RANGE FREQUENCY RANGE EFFICIENCY (Typ.) 90~132VAC or 254~373VDC 47 ~ 63Hz 86.5% AC CURRENT (Typ.) INRUSH CURRENT (Typ.) 3.0A/115VAC 2.5A/230VAC COLD START <80A(twidth<1000μs measured at 50% Ipeak) at 115/230VAC LEAKAGE CURRENT 2500ms, 100ms/115VAC 16ms/115VAC at full load 180~264VAC or 254~373VDC 88% PROTECTION SHORT CIRCUIT 180~264VAC or 254~373VDC 86.5% 88% <1mA A Type:105~185% rated output power OVERLOAD 90~132VAC or 254~373VDC B Type:105~140% rated output power Protection type : Hiccup mode, recovers automatically after fault condition is removed Protection type : Hiccup mode, recovers automatically after fault condition is removed OVER VOLTAGE 5.7 ~ 7.0V 4.6 ~ 5.4V Protection type : Hiccup mode, recovers automatically after fault condition is removed OVER TEMPERATURE WORKING TEMP. Shut down O/P voltage, recovers automatically after temperature goes down -25 ~ +70℃(Refer to "Derating Curve") 20 ~ 90% RH non-condensing WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY -40 ~ +85℃, 10 ~ 95% RH ±0.03%/℃ (0 ~ 60℃) TEMP. COEFFICIENT 10 ~ 500Hz, 3G 10min./1cycle, 60min. each along X, Y, Z axes VIBRATION SAFETY & EMC (Note 5) SAFETY STANDARDS WITHSTAND VOLTAGE UL60950-1 approved ISOLATION RESISTANCE EMC EMISSION I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC/25℃/ 70%RH Refer to EN55022 (CISPR22) Class A Refer to EN61000-4-5; 4KV, criteria A EMC IMMUNITY MTBF OTHERS NOTE DIMENSION PACKING I/P-O/P:3.0KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC 283.069K hrs min. MIL-HDBK-217F (25℃) 210*62*31mm (L*W*H) 0.55kg; 20pcs/12kg/1.63CUFT 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature. 2. Please refer to”static characteristics". 3. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 4. Tolerance : line regulation and load regulation. 5. Derating may be needed under low input voltages. Please check the static characteristics for more details. 6. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. File Name:HSN-200-SPEC 2014-12-09 PDF
Документация на серию HSN-200 

HSN-200.cdr

Дата модификации: 10.12.2014

Размер: 138.2 Кб

3 стр.

    Товары серии HSN-200

    Наименование i Упаковка P вых Выход U1 I1 Вход Управление U вх AC
    HSN-200-4.2A (MW)
     
    		1 шт
    HSN-200-4.2B (MW)
     
    		AC-DC сетевой преобразователь - P вых: 168 Вт; Выход: 4.2 В; U1: 3.6...4.4 В; I1: до 40... 1 шт
    HSN-200-5A (MW)
     
    		1 шт — —
    HSN-200-5B (MW)
     
    		Источник питания AC-DC; Выходная мощность 200 Вт; выходное напряжение 5 В; входное напр... 1 шт

    HSN-200 публикации

    13 марта 2015
    новость

    HSN-200/300 – тонкие бюджетные ИП для LED экранов и «бегущих строк»

    Компания MEAN WELL продолжает расширять семейство источников питания адаптированных для применения в светодиодных экранах, табло и «бегущих строках». В дополнение к уже существующим сериям HSP–150/250, HDP–190/240, и... ...читать