Серия LED-драйверов HVG-150-A

Общие характеристики

	Раздел	LED-драйверы
	Тип преобразователя
	Напряжение сети/входное номинальное
	Режим стабилизации
	Исполнение конструктивное
	Диапазон входных напряжений (AC)
	Диапазон входных напряжений (DC)
	Напряжение изоляции вход-выход
	Количество выходов
	Коэффициент мощности
	Функция защиты	КЗ, перегрузка, перенапряжение, перегрев
	Температура рабочая
	Размер	245×68×38.8 мм
	Применение	для промышленного и наружного освещения
	Особенности	широкий вход, низкие пульсации

Документация на серию HVG-150-A

150W Constant Voltage + Constant Current LED Driver HVG-150 series User’s Manual IP65 IP67 ■ Features Wide input range 180 ~ 528VAC Constant Voltage + Constant Current mode output Metal housing with ClassⅠdesign Built-in active PFC function IP67 / IP65 rating for indoor or outdoor installations Function options: output adjustable via potentiometer; 3 in 1 dimming (dim-to-off) ; Timer dimming Type HL ■ Applications LED street lighting LED high-bay lighting Parking space lighting LED fishing lamp LED greenhouse lighting Type HL for use in ClassⅠ, Division 2 hazardous (Classified) location. Typical lifetime>50000 hours 5 years warranty ■ Description HVG-150 series is a 150W AC/DC LED power supply featuring the dual mode constant voltage and constant current output. HVG-150 operates from 180~528 VAC and offers models with different rated voltage ranging between 12V and 54V. Thanks to the high efficiency up to 91.5%, with the fanless design, the series is able to operate from -40℃ through as high as +85℃ case temperature under free air convection. The design of metal housing and IP67/IP65 ingress protection level allows this series to fit both indoor and outdoor applications. HVG-150 is equipped with various function options, such as dimming methodologies, so as to provide the optimal design flexibility for LED lighting system. ■ Model Encoding HVG - 150 - 36 A Function options Rated output voltage(12V/15V/20V/24V/30V/36V/42V/48V/54V) Rated wattage Series name Type A B IP Level IP65 IP67 AB IP65 D IP67 Function Io and Vo adjustable through built-in potentiometer. 3 in 1 dimming function (0~10Vdc, 10V PWM signal and resistance) Io and Vo adjustable through built-in potentiometer & 3 in 1 dimming function (0~10Vdc, 10V PWM signal and resistance) Timer dimming function, contact MEAN WELL for details(safety pending). Note In Stock In Stock In Stock By request File Name:HVG-150-SPEC 2021-09-03

PDF

Документация на HVG-150-54B

HVG-150.cdr

Дата модификации: 10.09.2021

Размер: 590.5 Кб

9 стр.

HVG-150 150W Single Output Switching Power Supply series ■ Features : •Wide input range 180~528VAC •Built-in active PFC function •High efficiency up to 91.5% •Protections: Short circuit / Over current / Over voltage / Over temperature •Cooling by free air convection •OCP point adjustable through output cable or internal potentiometer •IP67 / IP65 design for indoor or outdoor installations •Three in one dimming function (0~10Vdc or 10V PWM signal or resistance) •Suitable for LED lighting and street lighting applications •Compliance to worldwide safety regulations for lighting •Suitable for dry / damp / wet locations •5 years warranty (Note.9) IP65 IP67 HVG-150-12 A A : IP65 rated. Output voltage and constant current level can be adjusted through internal potentiometer. B : IP67 rated. Constant current level adjustable through output cable with 0~10Vdc or 10V PWM signal or resistance. D (option) : IP67 rated. Timer dimming function, contact MEAN WELL for details. SPECIFICATION MODEL OUTPUT HVG-150-15 HVG-150-20 HVG-150-24 HVG-150-30 HVG-150-36 HVG-150-42 HVG-150-48 HVG-150-54 DC VOLTAGE 12V CONSTANT CURRENT REGION Note.4 7.2~12V HVG-150-12 15V 8.25~15V 20V 11~20V 24V 13.2~24V 36V 42V 7.5A 150W 6.25A 150W 150W 23.1~42V 3.58A 150.36W 54V 29.7~54V 10A 150W 19.8~36V 4.17A 150.12W 48V 26.4~48V RATED CURRENT RATED POWER 30V 16.5~30V 5A 3.13A 150.24W 2.78A 150.12W 200mVp-p 27 ~ 33V 200mVp-p 33 ~ 40V 200mVp-p 38 ~ 46V 200mVp-p 43 ~ 53V 200mVp-p 49 ~ 58V 2.75 ~ 5A ±1.0% ±0.5% 2.29 ~ 4.17A 1.97 ~ 3.58A 1.72 ~ 3.13A ±1.0% ±1.0% ±1.0% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% 10A 120W RIPPLE & NOISE (max.) Note.2 150mVp-p 150mVp-p 150mVp-p 150mVp-p VOLTAGE ADJ. RANGE Note.6 10.8 ~ 13.5V 13.5 ~ 17V 17 ~ 22V 22 ~ 27V Can be adjusted by internal potentiometer A type only CURRENT ADJ. RANGE 6 ~ 10A 5.5 ~ 10A 4.13 ~ 7.5A 3.44 ~ 6.25A VOLTAGE TOLERANCE Note.3 ±2.5% ±2.0% ±1.0% ±1.0% LINE REGULATION ±0.5% ±0.5% ±0.5% ±0.5% LOAD REGULATION SETUP, RISE TIME HOLD UP TIME (Typ.) ±2.0% ±1.5% ±1.0% ±0.5% ±0.5% ±0.5% 500ms, 80ms /230Vac 400ms,80ms/347VAC/480VAC at full load ; B type 500ms, 280ms/230Vac 500ms,280ms/347VAC/480Vac at 95% load 18ms at full load 480VAC / 347VAC VOLTAGE RANGE Note.5 180 ~ 528VAC FREQUENCY RANGE 47 ~ 63Hz POWER FACTOR (Typ.) TOTAL HARMONIC DISTORTION INPUT EFFICIENCY (Typ.) AC CURRENT (Typ.) 347VAC 480VAC INRUSH CURRENT (Typ.) LEAKAGE CURRENT OVER CURRENT PROTECTION SHORT CIRCUIT OVER VOLTAGE OVER TEMPERATURE WORKING TEMP. WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT 1.53 ~ 2.78A ±1.0% ±0.5% 254VDC ~ 747VDC PF≧0.98/230VAC, PF≧0.97/277VAC, PF≧0.95/347VAC, PF≧0.93/480VAC at full load (Please refer to "Power Factor Characteristic" curve) THD<20% when output loading≧50%（ ≧60% only for 12V model) at 230VAC/277VAC/347VAC input THD<20% when output loading≧75% at 480VAC input 87% 0.45A 89% 0.5A 90.5% 91% 91% 91% 91% 91.5% 91.5% 54 ~ 60V 59 ~ 65V 0.35A 0.38A COLD START 35A(twidth=790μs measured at 50% Ipeak) at 480VAC <0.75mA / 480VAC 95 ~ 108% Protection type : Constant current limiting, recovers automatically after fault condition is removed Constant current limiting, recovers automatically after fault condition is removed 23 ~ 27V 28 ~ 34V 34 ~ 38V 41 ~ 46V 47 ~ 53V 14.4 ~ 16.8V 18 ~ 21V Protection type : Shut down o/p voltage with auto-recovery or re-power on to recovery Shut down o/p voltage, recovers automatically after temperature goes down -40 ~ +70℃ (Refer to "Derating Curve") 20 ~ 95% RH non-condensing -40 ~ +80℃, 10 ~ 95% RH ±0.03%/℃ (0 ~ 60℃) VIBRATION 10 ~ 500Hz, 5G 12min./1cycle, period for 72min. each along X, Y, Z axes SAFETY STANDARDS Note.7 UL8750, CSA C22.2 No. 250.0-08, IP65 or IP67 approved SAFETY & EMC OTHERS WITHSTAND VOLTAGE I/P-O/P:3.75KVAC ISOLATION RESISTANCE EMC EMISSION I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25℃/ 70% RH Compliance to EN55015, EN61000-3-2 Class C (≧55% load,≧60% load only for 12V model ) ; EN61000-3-3, FCC part 15 class B EMC IMMUNITY MTBF Compliance to EN61000-4-2,3,4,5,6,8,11, EN61547, light industry level (surge 4KV), criteria A 158.6K hrs min. MIL-HDBK-217F (25℃) 245*68*38.8mm (L*W*H) 1.24Kg; 12pcs/15.9Kg/0.78CUFT DIMENSION PACKING NOTE I/P-FG:2KVAC O/P-FG:1.5KVAC 1. All parameters NOT specially mentioned are measured at 347VAC input, rated load and 25℃ of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. Please refer to "DRIVING METHODS OF LED MODULE". 5. Derating may be needed under low input voltages. Please check the static characteristics for more details. 6. A type only. 7. Safety and EMC design refer to EN60598-1, CNS15233, GB7000.1. 8. The power supply is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected by the complete installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again. 9. Refer to warranty statement. 10. To fulfill requirements of the latest ErP regulation for lighting fixtures, this LED power supply can only be used behind a switch without permanently connected to the mains.

PDF

Документация на серию HVG-150-A

Subject:

Дата модификации: 04.06.2014

Размер: 325.6 Кб

6 стр.

найти HVG-150-A.pdf

Товары серии HVG-150-A

Наименование	Упаковка	Димминг	Эффективность
HVG-150-12A (MW)	1 шт
HVG-150-12B (MW)		ШИМ, 0/1-10 В, потенциометр внешний	—
HVG-150-15A (MW)			—
HVG-150-15B (MW)		ШИМ, 0/1-10 В, потенциометр внешний	—
HVG-150-20A (MW)			—
HVG-150-20B (MW)		ШИМ, 0/1-10 В, потенциометр внешний	—
HVG-150-24A (MW)	1 шт
HVG-150-24B (MW)		ШИМ, 0/1-10 В, потенциометр внешний	—
HVG-150-30A (MW)			—
HVG-150-30B (MW)		ШИМ, 0/1-10 В, потенциометр внешний	—
HVG-150-36A (MW)			—
HVG-150-36B (MW)		ШИМ, 0/1-10 В, потенциометр внешний	—
HVG-150-42A (MW)			—
HVG-150-42B (MW)		ШИМ, 0/1-10 В, потенциометр внешний	—
HVG-150-48A (MW)			—
HVG-150-48B (MW)		ШИМ, 0/1-10 В, потенциометр внешний	—
HVG-150-54A (MW)			—
HVG-150-54AB (MW)		ШИМ, 0/1-10 В, потенциометр внешний	—
HVG-150-54B (MW)		ШИМ, 0/1-10 В, потенциометр внешний	—

HVG-150-A публикации

24 апреля 2024

новость

MEAN WELL – эксперт по источникам питания. 100 вопросов о ИП MW

Производя более 10 тысяч стандартных и ряд специализированных моделей источников питания и придерживаясь принципа полной поддержки клиентов, крупнейший мировой производитель ИП, компания MEAN WELL, подготовила список часто задаваемых вопросов о... ...читать

04 марта 2013

новость

HVGC-150 – новая серия высоковольтных LED драйверов от MEAN WELL

Известный производитель качественных источников питания – компания MEAN WELL пополнила семейство источников питания для светодиодного освещения HVGC новой серией HVGC–150. Особенность семейства HVGC и новой серии источников... ...читать

17 апреля 2012

новость

Высокоэффективные LED драйверы для однофазных и трехфазных сетей

HVG–100 и HVGC–100 мощностью 96 и 100 Вт – новые модели AC–DC преобразователей для светодиодного освещения от компании MEAN WELL. Данные источники питания выполнены в пыле/влагозащищенном металлическом корпусе и подойдут... ...читать