Серия LED-драйверов HVGC-100B

Общие характеристики

	Раздел	LED-драйверы
	Тип преобразователя
	Серия
	Мощность выходная
	Напряжение сети/входное номинальное
	Режим стабилизации
	Тип диммирования	ШИМ, 0/1-10 В, потенциометр внешний
	Исполнение конструктивное
	Степень защиты (IP)
	Подстройка выходных параметров
	Диапазон входных напряжений (AC)
	Диапазон входных напряжений (DC)
	Напряжение изоляции вход-выход
	Количество выходов
	Коэффициент мощности
	Эффективность
	Функция защиты	КЗ, перегрузка, перенапряжение, перегрев
	Температура рабочая
	Размер	236×68×38.8 мм
	Применение	для промышленного и наружного освещения
	Особенности	широкий вход, низкие пульсации

Документация на серию HVGC-100B

100W Constant Current Mode LED Driver HVGC-100 series User’s Manual 110 M M IP65 IP67 ■ Features Wide input range 180 ~ 528VAC Constant Current mode output Metal housing with ClassⅠdesign Built-in active PFC function IP67 / IP65 design for indoor or outdoor installations Function options: output adjustable via potentiometer; Bauar t gepruft Sicherheit egel ma ge od o s be wac g www.tuv.com ID 2000000000 ■ Applications LED street lighting LED high-bay lighting Parking space lighting LED fishing lamp 3 in 1 dimming (dim-to-off) ; Timer dimming Typical lifetime>50000 hours 5 years warranty ■ Description HVGC-100 series is a 100W LED AC/DC LED drive featuring the constant current mode and high voltage output. HVGC-100 operates from 180 ~ 528VAC and offers models with different rated current, 350mA and 700mA, respectively. Thanks to the high efficiency up to 91%, with the fanless design, the entire series is able to operate for -40℃ ~ +90℃ case temperature under free air convection. The design of metal housing and IP67/IP65 ingress protection level allows this series to fit both indoor and outdoor applications. HVGC-100 is equipped with various function options, such as dimming methodologies, so as to provide the optimal design flexibility for LED lighting system. ■ Model Encoding HVGC - 100 - 700 A Function options Rated output current(350/700mA) Rated wattage Series name Type A B IP Level IP65 IP67 AB IP65 D IP67 Function Io adjustable through built-in potentiometer. 3 in 1 dimming function (0~10Vdc, 10V PWM signal and resistance) Io adjustable through built-in potentiometer & 3 in 1 dimming function (0~10Vdc, 10V PWM signal and resistance) Timer dimming function, contact MEAN WELL for details(safety pending). Note In Stock In Stock In Stock By request File Name:HVGC-100-SPEC 2021-09-03

Документация на HVGC-100-700B

HVGC-100.cdr

Дата модификации: 10.09.2021

Размер: 597 Кб

9 стр.

HVGC-100 100W Single Output LED Power Supply ¡¡E¡½ E ¡E ¡E ¡E ¡E ¡E ¡E ¡E ¡E ¡E ¡E ¡E series Features : Constant current design Wide input range 180~480VAC Built-in active PFC function High efficiency up to 91% Protections: Short circuit / Over voltage / Over temperature Cooling by free air convection OCP point adjustable through output cable or internal potentiometer IP67 / IP65 design for indoor or outdoor installations Three in one dimming function (0~10Vdc or 10V PWM signal or resistance) Suitable for LED lighting and street lighting applications Compliance to worldwide safety regulations for lighting Suitable for dry / damp / wet locations 5 years warranty (Note.6) 110 F HVGC-100-350 A M M IP65 IP67 A : IP65 rated. Output voltage and constant current level can be adjusted through internal potentiometer. B : IP67 rated. Constant current level adjustable through output cable with 0~10Vdc or 10V PWM signal or resistance. D (option) : IP67 rated. Timer dimming function, contact MEAN WELL for details. SPECIFICATION HVGC-100-350 HVGC-100-700 350mA ¡Ó5.0% 700mA CURRENT ACCURACY OUTPUT VOLTAGE 29 ~ 285V 15 ~ 142V RATED POWER 99.75W MODEL RATED CURRENT OUTPUT CURRENT ADJ. RANGE PROTECTION 0.5Vp-p Can be adjusted by internal potentiometer A type only 210 ~ 350mA 420 ~ 700mA SETUP, RISE TIME 3000ms, 150ms at full load HOLD UP TIME (Typ.) 30ms at full load VOLTAGE RANGE INPUT 99.4W RIPPLE & NOISE (max.) Note.2 1Vp-p 440VAC / 347VAC ; B type 5000ms, 150ms at 95% load 440VAC / 347VAC 440VAC / 347VAC Note.3 180 ~ 480VAC 254VDC ~ 679VDC FREQUENCY RANGE 47 ~ 63Hz POWER FACTOR (Typ.) PF 0.98/230VAC, PF 0.98/277VAC, PF 0.97/347VAC, PF 0.94/440VAC at full load (Please refer to "Power Factor Characteristic" curve) EFFICIENCY (Typ.) 91% AC CURRENT (Typ.) INRUSH CURRENT (Typ.) 0.32A / 347VAC COLD START 25A(twidth=360 s measured at 50% Ipeak) at 440VAC LEAKAGE CURRENT <0.75mA / 440VAC ¡Ù ¡Ù ¡Ù ¡Ù 91% 0.26A / 440VAC £g SHORT CIRCUIT Constant current limiting, recovers automatically after fault condition is removed OVER VOLTAGE 300 ~ 320V 150 ~ 160V Protection type : Shut down o/p voltage with auto-recovery or re-power on to recovery OVER TEMPERATURE 100 10 (RTH2) Protection type : Shut down o/p voltage, recovers automatically after temperature goes down WORKING TEMP. -40 ~ +70 WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT ¢J ¡Ó ¢J ¢J (Refer to "Derating Curve") 20 ~ 95% RH non-condensing ¢J ¡Ó0.03%/¢J (0 ~ 50¢J) -40 ~ +80 , 10 ~ 95% RH VIBRATION 10 ~ 500Hz, 5G 12min./1cycle, period for 72min. each along X, Y, Z axes SAFETY STANDARDS Note.4 UL8750, CSA C22.2 No. 250.0-08, TUV EN61347-1, EN61347-2-13, IP65 or IP67 approved ; design refer to UL60950-1, TUV EN60950-1 SAFETY & EMC OTHERS WITHSTAND VOLTAGE I/P-O/P:3.75KVAC ISOLATION RESISTANCE EMC EMISSION I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25 / 70% RH Compliance to EN55015, EN61000-3-2 Class C ( 50% load) ; EN61000-3-3, FCC part 15 class B EMC IMMUNITY MTBF Compliance to EN61000-4-2,3,4,5,6,8,11, EN61547, light industry level (surge 4KV), criteria A 186.1K hrs min. MIL-HDBK-217F (25 ) DIMENSION 236*68*38.8mm (L*W*H) 1.18Kg; 12pcs/15.2Kg/0.74CUFT PACKING NOTE I/P-FG:2KVAC O/P-FG:0.5KVAC ¡Ù ¢J ¢J ¢J 1. All parameters NOT specially mentioned are measured at 347VAC input, rated load and 25 of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 2.2uf parallel capacitor. 3. Derating may be needed under low input voltages. Please check the static characteristics for more details. 4. Safety and EMC design refer to EN60598-1, CNS15233, GB7000.1. 5. The power supply is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected by the complete installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again. 6. Refer to warranty statement. File Name:HVGC-100-SPEC 2012-12-26

Документация на серию HVGC-100B

HVGC-100.cdr Keywords:

Дата модификации: 09.01.2013

Размер: 227.3 Кб

6 стр.

найти HVGC-100B.pdf

Товары серии HVGC-100B

Наименование	i	Упаковка	Напряжение выходное	Ток выходной
HVGC-100-350B (MW)		1 шт
HVGC-100-700B (MW)		1 шт