Серия LED-драйверов LPC-35

MEAN WELL

Общие характеристики

 Раздел LED-драйверы
Тип преобразователя
Мощность выходная
Напряжение сети/входное номинальное
Режим стабилизации
Тип диммирования
Исполнение конструктивное
Степень защиты (IP)
Подстройка выходных параметров
Диапазон входных напряжений (AC)
Напряжение изоляции вход-выход
Количество выходов
Эффективность
Функция защиты
Температура рабочая
Размер 148×40×30 мм
Применение для промышленного и наружного освещения
Особенности

Документация на серию LPC-35

LPC-35 35W Single Output Switching Power Supply ■ Features : series User’s Manual Constant current design Universal AC input / Full range Withstand 300VAC surge input for 5 seconds Protections: Short circuit / Over voltage Cooling by free air convection Fully encapsulated with IP67 level (Note.7) Fully isolated plastic case Class Ⅱ power unit, no FG Class 2 power unit Pass LPS Suitable for LED related fixture or appliance (such as LED Decoration or Advertisement devices)(Note.10) 100% full load burn-in test Low cost, high reliability 2 years warranty LPS IP67 ( for 700mA only) SPECIFICATION MODEL LPC-35-700 LPC-35-1050 LPC-35-1400 700mA 1050mA 1400mA DC VOLTAGE RANGE 9 ~ 48V 9 ~ 30V 9 ~ 24V RATED POWER 33.6W 31.5W 33.6W 200mVp-p 200mVp-p CURRENT ACCURACY ±5.0% LINE REGULATION ±1.0% SETUP, RISE TIME ±2.0% Note.6 500ms, 120ms / 230VAC HOLD UP TIME (Typ.) VOLTAGE RANGE 50ms/230VAC Note.4 90 ~ 264VAC EFFICIENCY (Typ.) 85% AC CURRENT (Typ.) INRUSH CURRENT(Typ.) 1.1A/115VAC 0.7A/230VAC COLD START 55A(twidth=500μs measured at 50% Ipeak) at 230VAC MAX. No. of PSUs on 16A CIRCUIT BREAKER 4 units (circuit breaker of type B) / 7 units (circuit breaker of type C) at 230VAC WORKING TEMP. WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT 31.5 ~ 40.5V 27.6 ~ 32.4V Protection type : Shut off o/p voltage, clamping by zener diode -30 ~ +70℃ (Refer to "Derating Curve") 20 ~ 90% RH non-condensing -40 ~ +80℃, 10 ~ 95% RH ±0.03%/℃ (0 ~ 50℃) 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes SAFETY STANDARDS UL1310, CAN/CSA C22.2 No. 223-M91(except for LPC-35-700), BIS IS15885, IEC62368-1,EAC TP TC 004, IP67 approved; Design refer to BS EN/EN62368-1 WITHSTAND VOLTAGE I/P-O/P:3KVAC ISOLATION RESISTANCE I/P-O/P:>100M Ohms / 500VDC / 25℃/ 70% RH Compliance to BS EN/EN55032 (CISPR32) Class B, BS EN/EN61000-3-2 Class A, BS EN/EN61000-3-3, EAC TP TC 020 EMC EMISSION EMC IMMUNITY DIMENSION PACKING NOTE 0.25mA / 240VAC 50.4 ~ 60V VIBRATION MTBF OTHERS 127 ~ 370VDC 47 ~ 63Hz PROTECTION OVER VOLTAGE EMC 500ms, 120ms / 115VAC at full load 16ms/115VAC at full load FREQUENCY RANGE LEAKAGE CURRENT SAFETY & R-41027766 VOLTAGE TOLERANCE Note.3 ±5.0% LOAD REGULATION INPUT THOMAS SAMUEL THOMAS SAMUEL RATED CURRENT RIPPLE & NOISE (max.) Note.2 200mVp-p OUTPUT IS 15885(Part 2/Sec13) ( except for 700mA ) Compliance to BS EN/EN61000-4-2,3,4,5,6,8,11, BS EN/EN55024, light industry level, criteria A, EAC TP TC 020 743.5Khrs min. MIL-HDBK-217F (25℃) 148*40*30mm (L*W*H) 0.34Kg; 40pcs/14.6Kg/0.70CUFT 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. Derating may be needed under low input voltage. Please check the static characteristics for more details. 5. The power supply is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected by the complete installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again. 6. Length of set up time is measured at first cold start. Turning ON/OFF the power supply may lead to increase of the set up time. 7. Suitable for indoor use or outdoor use without direct sunlight exposure. Please avoid immerse in the water over 30 minute. 8. The ambient temperature derating of 3.5℃/1000m with fanless models and of 5℃/1000m with fan models for operating altitude higher than 2000m(6500ft). 9. For any application note and IP water proof function installation caution, please refer our user manual before using. https://www.meanwell.com/Upload/PDF/LED_EN.pdf 10. This product is not intended for LED lighting luminaire applications in the EU.(In the EU the LPF/NPF/XLG series are recommended.) 11. To fulfill requirements of latest ErP regulation for lighting luminaires, this LED Driver can only be used behind a switch without permanently connected to mains. ※ Product Liability Disclaimer：For detailed information, please refer to https://www.meanwell.com/serviceDisclaimer.aspx File Name:LPC-35-SPEC 2021-09-03 PDF
Документация на LPC-35-700 

LPC-35.cdr

Дата модификации: 03.09.2021

Размер: 68.5 Кб

2 стр.

LPC-35 35W Single Output Switching Power Supply ¡¡E¡½ E ¡E ¡E ¡E ¡E ¡E ¡E ¡E ¡E ¡E ¡E ¡E ¡E Features : Constant current design Universal AC input / Full range Withstand 300VAC surge input for 5 seconds Protections: Short circuit / Over voltage Cooling by free air convection Fully encapsulated with IP67 level (Note.8) Fully isolated plastic case Class power unit, no FG Class 2 power unit Pass LPS Suitable for LED lighting and moving sign applications (Note.7) 100% full load burn-in test Low cost, high reliability 2 years warranty ¢º LPS IP67 SPECIFICATION MODEL OUTPUT LPC-35-700 LPC-35-1050 LPC-35-1400 1050mA 1400mA DC VOLTAGE RANGE 9 ~ 48V 9 ~ 30V 9 ~ 24V RATED POWER 33.6W 31.5W 33.6W 200mVp-p 200mVp-p VOLTAGE TOLERANCE Note.3 CURRENT ACCURACY LOAD REGULATION SETUP, RISE TIME VOLTAGE RANGE 50ms/230VAC Note.4 90 ~ 264VAC FREQUENCY RANGE 47 ~ 63Hz EFFICIENCY (Typ.) 85% AC CURRENT (Typ.) INRUSH CURRENT(max.) LEAKAGE CURRENT PROTECTION OVER VOLTAGE WORKING TEMP. WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION EMC 127 ~ 370VDC 0.7A/230VAC £g COLD START 55A(twidth=500 s measured at 50% Ipeak) at 230VAC 0.25mA / 240VAC 50.4 ~ 60V 31.5 ~ 40.5V 27.6 ~ 32.4V Protection type : Shut off o/p voltage, clamping by zener diode -30 ~ +70 ¢J (Refer to "Derating Curve") 20 ~ 90% RH non-condensing ¢J ¡Ó0.03%/¢J (0 ~ 50¢J) -40 ~ +80 , 10 ~ 95% RH 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes UL1310, CAN/CSA C22.2 No. 223-M91(except for LPC-35-700), IP67 approved ; design refer to TUV EN60950-1 WITHSTAND VOLTAGE I/P-O/P:3KVAC ISOLATION RESISTANCE I/P-O/P:>100M Ohms / 500VDC / 25 / 70% RH Compliance to EN55022 (CISPR22) Class B, EN61000-3-2 Class A, EN61000-3-3 EMC EMISSION EMC IMMUNITY DIMENSION PACKING NOTE 1.1A/115VAC 500ms, 120ms / 115VAC at full load 16ms/115VAC at full load SAFETY STANDARDS MTBF OTHERS ¡Ó5.0% ¡Ó5.0% Ó¡ 1.0% Ó¡ 2.0% Note.6 500ms, 120ms / 230VAC HOLD UP TIME (Typ.) SAFETY & ( except for 700mA ) 700mA LINE REGULATION INPUT ( for 700mA only) RATED CURRENT RIPPLE & NOISE (max.) Note.2 200mVp-p series ¢J Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024, light industry level, criteria A 743.5K hrs min. MIL-HDBK-217F (25 ) ¢J 148*40*30mm (L*W*H) 0.34Kg; 40pcs/14.6Kg/0.63CUFT ¢J 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. Derating may be needed under low input voltage. Please check the static characteristics for more details. 5. The power supply is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected by the complete installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again. 6. Length of set up time is measured at first cold start. Turning ON/OFF the power supply may lead to increase of the set up time. 7. The unit might not be suitable for lighting applications in EU countries. Please check with your local authorities for the possible use of the unit. 8. Suitable for indoor use or outdoor use without direct sunlight exposure. Please avoid immerse in the water over 30 minute. File Name:LPC-35-SPEC 2012-12-26 PDF
Документация на серию LPC-35 

LPC-35.cdr Keywords:

Дата модификации: 09.01.2013

Размер: 69.1 Кб

2 стр.

    Товары серии LPC-35

    Наименование i Упаковка Напряжение выходное Ток выходной
    LPC-35-1050 (MW)
     
    		AC-DC сетевой преобразователь - P вых: 35 Вт; Выход: 1.05 А; U1: 3...30 В; I1: 1.05 А; ... в коробках 40 шт
    LPC-35-1400 (MW)
     
    		Преобразователь напряжения AC-DC в корпусе. 33.6Вт, Uвх=90-264В AC, выход 9…24В/1.4А(п... в коробках 40 шт
    LPC-35-700 (MW)
     
    		Преобразователь напряжения AC-DC в корпусе. 33.6Вт, Uвх=90-264В AC, выход 9…48В/0.7А(п... в коробках 40 шт

    LPC-35 публикации

    22 октября 2025
    новость

    Широкий ассортимент LED-драйверов MEAN WELL доступен со склада

    Анастасия Рекида (КОМПЭЛ) КОМПЭЛ поддерживает на складе большой ассортимент LED–драйверов MEAN WELL, состоящий из 274 наименований, входящих в 31 серию компонентов. Ассортимент предназначен для различных областей применения и охватывает... ...читать

    20 июня 2022
    новость

    LED-драйверы MEAN WELL – выбор больше, стоимость ниже

    Расширив и существенно пополнив склад LED–драйверами компании MEAN WELL, Компэл одновременно снизил цену на них. В настоящий момент на складе представлена широкая линейка продукции как для наружного (семейства HLG, ELG, XLG, LPC, LPV), так и... ...читать