Серия AC-DC сетевых преобразователей MSP-100

MEAN WELL

Общие характеристики

 Раздел AC-DC сетевые преобразователи
Тип стабилизации
Вход
Конструктивное исполнение
Количество выходов
Исполнение
Входное напряжение AC
Входное напряжение DC
Коэффициент мощности
Напряжение изоляции вход-выход
Напряжение изоляции вход-земля
Напряжение изоляции выход-земля
Применение
Размер 159×97×38 мм
Рабочая температура

Документация на серию MSP-100

MSP-100 100W Single Output Medical Type ■ Features : Universal AC input / Full range Built-in active PFC function High efficiency up to 90% Withstand 300VAC surge input for 5 seconds Protections: Short circuit / Overload / Over voltage Protections: Over temperature (optional) Cooling by free air convection 1U low profile 38mm Medical safety approved (MOOP level) Built-in remote ON-OFF control No load power consumption<0.5W All using 105℃ long life electrolytic capacitors 5 years warranty SPECIFICATION ANSI/AAMI ES60601-1 MODEL OUTPUT MSP-100-3.3 MSP-100-5 MSP-100-7.5 DC VOLTAGE 3.3V 5V RATED CURRENT 20A 17A CURRENT RANGE 0 ~ 20A RATED POWER 66W MSP-100-24 MSP-100-36 MSP-100-48 7.5V 12V 15V 24V 36V 48V 13.5A 8.5A 7A 4.5A 2.9A 2.2A 0 ~ 17A 0 ~ 13.5A 0 ~ 8.5A 0 ~ 7A 0 ~ 4.5A 0 ~ 2.9A 0 ~ 2.2A 85W 101.3W 102W 105W 108W 104.4W 105.6W 80mVp-p 100mVp-p 120mVp-p 150mVp-p 150mVp-p 200mVp-p 240mVp-p VOLTAGE ADJ. RANGE 4.75 ~ 5.8V +2.5,-3.5% 7.1 ~ 9V ±2.5% 11.4 ~ 13.8V ±1.5% 14.25 ~ 18V ±1.5% 22.8 ~ 28.8V ±1.5% 34.2 ~ 39.6V ±1.5% 45.6 ~ 55.2V ±1.5% 3.1 ~ 3.8V VOLTAGE TOLERANCE Note.3 +2.5,-3.5% LINE REGULATION ±0.5% ±0.5% ±0.5% ±0.3% ±0.3% ±0.2% ±0.2% ±0.2% LOAD REGULATION ±2.0% ±2.0% ±1.5% ±0.8% ±0.8% ±0.5% ±0.5% ±0.5% SETUP, RISE TIME 2500ms, 100ms/230VAC HOLD UP TIME (Typ.) 50ms/230VAC 88% 88.5% 89% 90% 2500ms, 100ms/115VAC at full load 20ms/115VAC at full load 120 ~ 370VDC POWER FACTOR (Typ.) PF>0.95/230VAC EFFICIENCY (Typ.) 78% AC CURRENT (Typ.) INRUSH CURRENT (Typ.) 1.2A/115VAC 35A/115VAC PF>0.98/115VAC at full load 83% 84% 87.5% 0.6A/230VAC 65A/230VAC Note.6 Earth leakage current < 300μA/264VAC , Touch leakage current < 100μA/264VAC OVERLOAD FUNCTION IEC60601-1 TPTC004 MSP-100-15 RIPPLE & NOISE (max.) Note.2 80mVp-p LEAKAGE CURRENT PROTECTION User’s Manual MSP-100-12 Note.5 85 ~ 264VAC VOLTAGE RANGE 47 ~ 63Hz FREQUENCY RANGE INPUT series OVER VOLTAGE 105 ~ 135% rated output power Protection type : Constant current limiting for Vo=50 ~ 100% of rated voltage, recovers automatically after fault condition is removed 6 ~ 7V 9.4 ~ 10.9V 14.4 ~ 16.8V 18.8 ~ 21.8V 30 ~ 34.8V 41.4 ~ 48.6V 57.6 ~ 67.2V 3.96 ~ 4.62V Protection type : Shut down o/p voltage, re-power on to recover OVER TEMPERATURE REMOTE CONTROL Shut down o/p voltage, recovers automatically after temperature goes down RC+/RC- : 0 ~ 0.8V= power on ; 4 ~ 10V = power off WORKING TEMP. -40 ~ +60℃ (Refer to "Derating Curve") 20 ~ 90% RH non-condensing WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY -40 ~ +85℃, 10 ~ 95% RH ±0.04%/℃ (0 ~ 50℃) TEMP. COEFFICIENT VIBRATION SAFETY & EMC (Note 4) OTHERS NOTE SAFETY STANDARDS ISOLATION LEVEL 10 ~ 500Hz, 5G 10min./1cycle, 60min. each along X, Y, Z axes ANSI/AAMI ES60601-1, IEC60601-1, EAC TP TC 004 approved, Design refer to BS EN/EN60601-1, BS EN/EN62368-1 Primary-Secondary: 2×MOOP, Primary-Earth: 1×MOOP, Secondary-Earth: 1×MOOP WITHSTAND VOLTAGE I/P-O/P:4KVAC ISOLATION RESISTANCE EMC EMISSION I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25℃/ 70% RH Compliance to BS EN/EN55011 (CISPR11) Class B, BS EN/EN61000-3-2,-3, EAC TP TC 020 EMC IMMUNITY Compliance to BS EN/ EN61000-4-2,3,4,5,6,8,11, BS EN/ EN60601-1-2 , EAC TP TC 020 MTBF 295.7K hrs min. DIMENSION 159*97*38mm (L*W*H) PACKING 0.38Kg; 24pcs/10.1Kg/0.9CUFT I/P-FG:2KVAC O/P-FG:0.5KVAC MIL-HDBK-217F (25℃) 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. The power supply is considered a component which will be installed into a final equipment. All the EMC tests are been executed by mounting the unit on a 360mm*360mm metal plate with 1mm of thickness. The final equipment must be re-confirmed that it still meets EMC directives. For guidance on how to perform these EMC tests, please refer to “EMI testing of component power supplies.” (as available on http://www.meanwell.com) 5. Derating may be needed under low input voltages. Please check the derating curve for more details. 6. Touch current was measured from primary input to DC output. 7. When the input voltage is less than 40VAC, the SPS may exhibit degradation of performance. The final product manufacturers must re-confirm this deviation that does not affect basic safety or essential performance. 8. The ambient temperature derating of 3.5℃/1000m with fanless models and of 5℃/1000m with fan models for operating altitude higher than 2000m(6500ft). ※ Product Liability Disclaimer：For detailed information, please refer to https://www.meanwell.com/serviceDisclaimer.aspx File Name:MSP-100-SPEC 2021-09-15 PDF
Документация на MSP-100-7.5 

MSP-100-20210915.cdr

Дата модификации: 15.09.2021

Размер: 89.8 Кб

2 стр.

MSP-100 100W Single Output Medical Type series ¡½ Features : ¡EUniversal AC input / Full range ¡ Built-in active PFC function E ¡ High efficiency up to 90% E ¡ Withstand 300VAC surge input for 5 seconds E ¡ Protections: Short circuit / Overload / Over voltage E ¡ Protections: Over temperature (optional) E ¡ Cooling by free air convection E ¡ 1U low profile 38mm E ¡ Medical safety approved (MOOP level) E ¡ Built-in remote ON-OFF control E ¡ No load power consumption<0.5W (Note.6) E ¡ All using 105¢J long life electrolytic capacitors E ¡ 5 years warranty E SPECIFICATION MODEL OUTPUT MSP-100-3.3 MSP-100-5 MSP-100-7.5 MSP-100-12 MSP-100-15 MSP-100-24 MSP-100-36 DC VOLTAGE 3.3V 5V 7.5V 12V 15V 24V 36V 48V RATED CURRENT 20A 17A 13.5A 8.5A 7A 4.5A 2.9A 2.2A CURRENT RANGE 0 ~ 20A 0 ~ 17A 0 ~ 13.5A 0 ~ 8.5A 0 ~ 7A 0 ~ 4.5A 0 ~ 2.9A 0 ~ 2.2A RATED POWER 66W 85W 101.3W 102W 105W 108W 104.4W 105.6W RIPPLE & NOISE (max.) Note.2 80mVp-p 80mVp-p 100mVp-p 120mVp-p 150mVp-p 150mVp-p 200mVp-p 240mVp-p VOLTAGE ADJ. RANGE 4.75 ~ 5.8V +2.5,-3.5% 7.1 ~ 9V ¡Ó2.5% 11.4 ~ 13.8V ¡Ó1.5% 14.25 ~ 18V ¡Ó1.5% 22.8 ~ 28.8V ¡Ó1.5% 34.2 ~ 39.6V ¡Ó1.5% 45.6 ~ 55.2V ¡Ó1.5% 3.1 ~ 3.8V VOLTAGE TOLERANCE Note.3 +2.5,-3.5% LINE REGULATION ¡Ó0.5% ¡Ó0.5% ¡Ó0.5% ¡Ó0.3% ¡Ó0.3% ¡Ó0.2% ¡Ó0.2% ¡Ó0.2% LOAD REGULATION ¡Ó2.0% ¡Ó2.0% ¡Ó1.5% ¡Ó0.8% ¡Ó0.8% ¡Ó0.5% ¡Ó0.5% ¡Ó0.5% SETUP, RISE TIME 2500ms, 100ms/230VAC HOLD UP TIME (Typ.) 50ms/230VAC 88% 88.5% 89% 90% PF>0.95/230VAC EFFICIENCY (Typ.) 78% AC CURRENT (Typ.) INRUSH CURRENT (Typ.) 1.2A/115VAC 35A/115VAC PF>0.98/115VAC at full load 83% 84% 87.5% 0.6A/230VAC 65A/230VAC £g £g Note.7 Earth leakage current < 300 A/264VAC , Touch leakage current < 100 A/264VAC OVERLOAD PROTECTION OVER VOLTAGE OVER TEMPERATURE FUNCTION 120 ~ 370VDC POWER FACTOR (Typ.) LEAKAGE CURRENT 2500ms, 100ms/115VAC at full load 20ms/115VAC at full load VOLTAGE RANGE Note.5 85 ~ 264VAC 47 ~ 63Hz FREQUENCY RANGE INPUT MSP-100-48 105 ~ 135% rated output power Protection type : Constant current limiting for Vo=50 ~ 100% of rated voltage, recovers automatically after fault condition is removed 6 ~ 7V 9.4 ~ 10.9V 14.4 ~ 16.8V 18.8 ~ 21.8V 30 ~ 34.8V 41.4 ~ 48.6V 57.6 ~ 67.2V 3.96 ~ 4.62V Protection type : Shut down o/p voltage, re-power on to recover 90¢J(3.3V ~ 7.5V) , 85¢J(12V ~ 48V) (TSW1 : detect on heatsink Q101 of power transistor)(optional) REMOTE CONTROL Protection type : Shut down o/p voltage, recovers automatically after temperature goes down RC+/RC- : 0 ~ 0.8V= power on ; 4 ~ 10V = power off WORKING TEMP. -40 ~ +60¢J (Refer to "Derating Curve") 20 ~ 90% RH non-condensing WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY -40 ~ +85¢J, 10 ~ 95% RH ¡Ó0.04%/¢J (0 ~ 50¢J) TEMP. COEFFICIENT VIBRATION SAFETY STANDARDS SAFETY & WITHSTAND VOLTAGE ISOLATION RESISTANCE EMC (Note 4) EMC EMISSION OTHERS NOTE 10 ~ 500Hz, 5G 10min./1cycle, 60min. each along X, Y, Z axes ANSI/AAMI ES60601-1, IEC60601-1 approved I/P-O/P:4KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25¢J/ 70% RH Compliance to EN55011 (CISPR11) Class B, EN61000-3-2,-3 EMC IMMUNITY Compliance to EN61000-4-2,3,4,5,6,8,11, EN60601-1-2 MTBF 295.7K hrs min. DIMENSION 159*97*38mm (L*W*H) PACKING 0.38Kg; 24pcs/10.1Kg/0.76CUFT MIL-HDBK-217F (25¢J) 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25¢J of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. For guidance on how to perform these EMC tests, please refer to “EMI testing of component power supplies.” (as available on http://www.meanwell.com) 5. Derating may be needed under low input voltages. Please check the derating curve for more details. 6. No load power consumption<0.5W when RC+ & RC- (CN100 pin1,2) 0 ~ 8V or short. 7. Touch current was measured from primary input to DC output. 8. When the input voltage is less than 40VAC, the SPS may exhibit degradation of performance. The final product manufacturers must re-confirm this deviation that does not affect basic safety or essential performance. File Name:MSP-100-SPEC 2012-08-24 PDF
Документация на серию MSP-100 

MSP-100.cdr Keywords:

Дата модификации: 28.08.2012

Размер: 120.8 Кб

2 стр.

    Товары серии MSP-100

    Наименование i Упаковка P вых Выход U1 I1 Возможности Защита Управление КПД Шум
    MSP-100-12 (MW)
     
    		1 шт ККМ, дистанционное Вкл/Выкл, 1U профиль КЗ, перегрузка, перенапряжение
    MSP-100-12.0 (MW)
     
    		КЗ, перегрузка, перенапряжение, перегрев
    MSP-100-15 (MW)
     
    		AC-DC сетевой преобразователь - P вых: 105 Вт; Выход: 15 В; U1: 14.25...18 В; I1: до 7 ... 1 шт ККМ, дистанционное Вкл/Выкл, 1U профиль КЗ, перегрузка, перенапряжение
    MSP-100-24 (MW)
     
    		AC-DC сетевой преобразователь - P вых: 108 Вт; Выход: 24 В; U1: 22.8...28.8 В; I1: до 4... в коробках 24 шт ККМ, дистанционное Вкл/Выкл, 1U профиль КЗ, перегрузка, перенапряжение
    MSP-100-3.3 (MW)
     
    		AC-DC сетевой преобразователь - P вых: 66 Вт; Выход: 3.3 В; U1: 3.1...3.8 В; I1: до 20 ... 1 шт ККМ, дистанционное Вкл/Выкл, 1U профиль КЗ, перегрузка, перенапряжение
    MSP-100-36 (MW)
     
    		AC-DC сетевой преобразователь - P вых: 104 Вт; Выход: 36 В; U1: 34.2...39.6 В; I1: до 2... 1 шт ККМ, дистанционное Вкл/Выкл, 1U профиль КЗ, перегрузка, перенапряжение
    MSP-100-48 (MW)
     
    		AC-DC сетевой преобразователь - P вых: 105 Вт; Выход: 48 В; U1: 45.6...55.2 В; I1: до 2... 1 шт ККМ, дистанционное Вкл/Выкл, 1U профиль КЗ, перегрузка, перенапряжение
    MSP-100-5 (MW)
     
    		AC-DC сетевой преобразователь - P вых: 85 Вт; Выход: 5 В; U1: 4.75...5.8 В; I1: до 17 А... 1 шт ККМ, дистанционное Вкл/Выкл, 1U профиль КЗ, перегрузка, перенапряжение
    MSP-100-7.5 (MW)
     
    		AC-DC сетевой преобразователь - P вых: 101 Вт; Выход: 7.5 В; U1: 7.1...9 В; I1: до 13.5... 1 шт ККМ, дистанционное Вкл/Выкл, 1U профиль КЗ, перегрузка, перенапряжение

    MSP-100 публикации

    08 апреля 2014
    статья

    Электропитание в белом халате: источники питания для медицинcкого оборудования

    Далеко не всякий производитель источников питания способен выпускать изделия для медицины: здесь действуют высокие требования как к выходным электрическим параметрам, так и к электробезопасности – особенно в случае прямого контакта с органами... ...читать

    19 февраля 2013
    новость

    MSP-100 - новая серия медицинских источников питания от MEAN WELL

    Компания MEAN WELL представила новую эффективную серию высоконадежных источников питания медицинского назначения MSP–100. Новая серия расширяет существующую линейку сетевых AC–DC преобразователей питания MSP–300 и MSP–200... ...читать