Серия AC-DC сетевых преобразователей PD-65

MEAN WELL

Общие характеристики

 Раздел AC-DC сетевые преобразователи
Напряжение 1 канала
Тип стабилизации
Вход
Конструктивное исполнение
Возможности
Количество выходов
Тип управления выходом
Исполнение
Входное напряжение AC
Входное напряжение DC
Коэффициент мощности
Напряжение изоляции вход-выход
Напряжение изоляции вход-земля
Применение
Шум

Документация на серию PD-65

PD-65 65W Dual Output Switching Power Supply series User’s Manual ■ Features : Universal AC input / Full range Low leakage current<0.5mA Protections: Short circuit / Overload / Over voltage Cooling by free air convection 100% full load burn-in test Fixed switching frequency at 65KHz 2 years warranty Bauar t gepruft Sicherheit egel ma ge od o s be wac g www. tuv.com ID 2000000000 SPECIFICATION MODEL OUTPUT UL62368-1 BS EN/EN62368-1 TPTC004 IEC62368-1 PD-65A PD-65B OUTPUT NUMBER CH1 CH2 CH1 CH2 DC VOLTAGE 5V 12V 5V 24V RATED CURRENT 5.5A 2.8A 3.5A 2A CURRENT RANGE 0.4 ~ 7A 0.2 ~ 3.2A 0.4 ~ 6A 0.2 ~ 2.6A RATED POWER 61.1W OUTPUT POWER (max.) Rated output power for convection; 72W with 18CFM min. Forced air 65.5W RIPPLE & NOISE (max.) Note.2 50mVp-p 120mVp-p 50mVp-p 150mVp-p CH1:4.75 ~ 5.5V VOLTAGE TOLERANCE Note.3 ±4.0% ±7.0% CH1:4.75 ~ 5.5V ±4.0% ±7.0% LINE REGULATION ±1.0% ±2.0% ±1.0% ±2.0% LOAD REGULATION ±3.0% ±4.0% ±3.0% ±4.0% SETUP, RISE TIME 800ms, 20ms at full load HOLD UP TIME (Typ.) 60ms at full load VOLTAGE RANGE 90 ~ 264VAC FREQUENCY RANGE 47 ~ 440Hz VOLTAGE ADJ. RANGE INPUT EFFICIENCY(Typ.) 78% AC CURRENT (Typ.) INRUSH CURRENT (Typ.) 1.5A/115VAC LEAKAGE CURRENT OVERLOAD PROTECTION OVER VOLTAGE WORKING TEMP. WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION SAFETY STANDARDS SAFETY & WITHSTAND VOLTAGE EMC (Note 4) OTHERS 81% 0.9A/230VAC COLD START 20A/115VAC <0.75mA 40A/230VAC 73 ~ 105W rated output power Protection type : Hiccup mode, recovers automatically after fault condition is removed. CH1: 5.75 ~ 6.75VDC on CH1 Protection type : Hiccup mode, recovers automatically after fault condition is removed. -10 ~ +60℃ (Refer to "Derating Curve") 20 ~ 90% RH non-condensing -20 ~ +85℃, 10 ~ 95% RH ±0.04%/℃ (0 ~ 50℃) on +5V output 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes UL62368-1, TUV BS EN/EN62368-1, EAC TP TC 004 approved I/P-O/P:3KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC ISOLATION RESISTANCE EMC EMISSION I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25℃/ 70% RH Compliance to BS EN/EN55032 (CISPR32) Class B, BS EN/EN61000-3-2,-3, EAC TP TC 020 EMC IMMUNITY MTBF Compliance to BS EN/EN61000-4-2,3,4,5,6,8,11, BS EN/EN55024, light industry level, criteria A, EAC TP TC 020 DIMENSION PACKING NOTE 127 ~370VDC 414.8K hrs min. MIL-HDBK-217F (25℃) 127*76*42mm (L*W*H) 0.24Kg; 54pcs/15Kg/1.28CUFT 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. The power supply is considered a component which will be installed into a final equipment. All the EMC tests are been executed by mounting the unit on a 360mm*360mm metal plate with 1mm of thickness. The final equipment must be re-confirmed that it still meets EMC directives. For guidance on how to perform these EMC tests, please refer to “EMI testing of component power supplies.” (as available on http://www.meanwell.com) 5. Mounting holes M1 and M2 should be grounded for EMI purposes. 6. Heat Sink HS1,HS2 can not be shorted. 7. The ambient temperature derating of 3.5℃/1000m with fanless models and of 5℃/1000m with fan models for operating altitude higher than 2000m(6500ft). ※ Product Liability Disclaimer：For detailed information, please refer to https://www.meanwell.com/serviceDisclaimer.aspx File Name:PD-65-SPEC 2021-09-15 PDF
Документация на PD-65B 

PD-65-20210915.cdr

Дата модификации: 02.12.2021

Размер: 111.7 Кб

2 стр.

PD-65 65W Dual Output Switching Power Supply series Features : Universal AC input / Full range Low leakage current<0.5mA Protections: Short circuit / Overload / Over voltage Cooling by free air convection 100% full load burn-in test Fixed switching frequency at 65KHz 2 years warranty SPECIFICATION MODEL OUTPUT PD-65B PD-65A OUTPUT NUMBER CH1 CH2 CH1 CH2 DC VOLTAGE 5V 12V 5V 24V RATED CURRENT 5.5A 2.8A 3.5A 2A CURRENT RANGE 0.4 ~ 7A 0.2 ~ 3.2A 0.4 ~ 6A 0.2 ~ 2.6A RATED POWER 61.1W OUTPUT POWER (max.) Rated output power for convection; 72W with 18CFM min. Forced air 65.5W RIPPLE & NOISE (max.) Note.2 50mVp-p 120mVp-p VOLTAGE ADJ. RANGE CH1:4.75 ~ 5.5V VOLTAGE TOLERANCE Note.3 4.0% INPUT 7.0% 150mVp-p 7.0% 1.0% 2.0% 1.0% 2.0% LOAD REGULATION 3.0% 4.0% 3.0% 4.0% SETUP, RISE TIME 800ms, 20ms at full load HOLD UP TIME (Typ.) 60ms at full load VOLTAGE RANGE 90 ~ 264VAC FREQUENCY RANGE 47 ~ 440Hz EFFICIENCY(Typ.) 78% AC CURRENT (Typ.) INRUSH CURRENT (Typ.) 1.5A/115VAC OVERLOAD PROTECTION OVER VOLTAGE WORKING TEMP. WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION SAFETY STANDARDS WITHSTAND VOLTAGE SAFETY & ISOLATION RESISTANCE EMC EMI CONDUCTION & RADIATION (Note 4) HARMONIC CURRENT EMS IMMUNITY MTBF DIMENSION PACKING NOTE CH1:4.75 ~ 5.5V 4.0% LINE REGULATION LEAKAGE CURRENT OTHERS 50mVp-p 127 ~370VDC 81% 0.9A/230VAC COLD START 20A/115VAC <0.75mA 40A/230VAC 73 ~ 105W rated output power Protection type : Hiccup mode, recovers automatically after fault condition is removed. CH1: 5.75 ~ 6.75VDC on CH1 Protection type : Hiccup mode, recovers automatically after fault condition is removed. -10 ~ +60 (Refer to output load derating curve) 20 ~ 90% RH non-condensing -20 ~ +85 , 10 ~ 95% RH 0.04%/ (0 ~ 50 ) on +5V output 10 ~ 500Hz, 2G 10min./1cycle, Period for 60min.each along X, Y, Z axes UL60950, TUV EN60950-1 Approved I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC Compliance to EN55022 (CISPR22) Class B Compliance to EN61000-3-2,-3 Compliance to EN61000-4-2,3,4,5,6,8,11; ENV50204, EN55024, Light industry level, criteria A 288.1K hrs min. MIL-HDBK-217F (25 127*76*42mm (L*W*H) 0.24Kg; 54pcs/15Kg/1.35CUFT ) 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. 5. Mounting holes M1 and M2 should be grounded for EMI purposes. File Name:PD-65-SPEC 2006-12-19 PDF
Документация на серию PD-65 

PD-65.cdr

Дата модификации: 02.01.2007

Размер: 420.8 Кб

2 стр.

    Товары серии PD-65

    Наименование i Упаковка P вых Выход I1 Защита КПД Размер T раб
    PD-65A (MW)
     
    		Преобразователь напряжения AC-DC ( DC-DC)на шасси. 61.1Вт, Uвх=90-264В AC 47...440Гц (1... в коробках 18 шт КЗ, перегрузка, перенапряжение 127×76×42 мм
    PD-65A PBF (MW)
     
    		— OVERLOAD, OVER VOLTAGE, SHORT CIRCUIT 127×76 мм
    PD-65B (MW)
     
    		Преобразователь напряжения AC-DC ( DC-DC)на шасси. 65.5Вт, Uвх=90-264В AC 47...440Гц (1... 6 шт КЗ, перегрузка, перенапряжение 127×76×42 мм
    PD-65B PBF (MW)
     
    		— OVERLOAD, OVER VOLTAGE, SHORT CIRCUIT 127×76 мм

    PD-65 публикации

    03 мая 2023
    новость

    Компоненты JSCJ для устройств быстрой зарядки – простая схемотехника и соответствие стандартам по ЭМС

    Соответствуя требованиям стремительно развивающегося рынка зарядных устройств и постоянно совершенствую свои технологии, компания Jiangsu Changjing Technology Co., Ltd. (JSCJ) предлагает новые решения: выпрямляющие диоды, стабилитроны,... ...читать

    04 мая 2020
    статья

    Чип-резисторы Panasonic: надежность на первом месте

    Вячеслав Гавриков (г. Смоленск) Компания Panasonic является одним из лидеров рынка резисторов. В статье дан обзор чип–резисторов производства компании Panasonic, в частности – серий с оптимизированными параметрами: прецизионных... ...читать

    28 ноября 2007
    статья

    Продукция MEAN WELL: соответствие международным сертификатам и директиве RoHS

            Серийно выпускаемая электронная продукция, поставляемая во многие страны, должна удовлетворять определенным международным стандартам безопасности (Safety standards) и электромагнитной совместимости (EMC... ...читать