Серия DC-DC модульных преобразователей SCW12

MEAN WELL

Общие характеристики

 Раздел DC-DC модульные преобразователи
Серия
Монтаж
Выходная мощность
Количество каналов
Возможности
Комплекс защит
Напряжение изоляции вход-выход
Размер 31.8×20.3×12.2 мм
Рабочая температура

Документация на серию SCW12

SCW12 12W DC-DC Regulated Single Output Converter series ■ Features : 2:1 wide input range 1500VDC I/O isolation Built-in remote ON/OFF control Built-in EMI filter Protections: Short circuit / Overload Cooling by free air convection Five-sided shield metal case 100% full load burn-in test Low cost / High reliability Modified models available: output 2.5V/3.3V 2 years warranty SPECIFICATION ORDER NO. OUTPUT SCW12A-05 SCW12B-05 SCW12C-05 SCW12A-12 SCW12B-12 SCW12C-12 SCW12A-15 DC VOLTAGE 5V 12V 15V CURRENT RANGE 480 ~ 2400mA 200 ~ 1000mA 160 ~ 800mA RATED POWER 12W 60mVp-p 60mVp-p 220uF 220uF RIPPLE & NOISE (max.) Note.2 50mVp-p LINE REGULATION Note.3 ±0.5% LOAD REGULATION SCW12B-15 SCW12C-15 85% 83% Note.4 ±0.5% VOLTAGE ACCURACY ±2.0% SWITCHING FREQUENCY 400KHz min. EXTERNAL CAPACITANCE LOAD (max.) 1000uF A: 9 ~ 18VDC VOLTAGE RANGE INPUT PROTECTION (Note. 5) SAFETY OTHERS C: 36 ~ 72VDC EFFICIENCY (Typ.) 82% 83% DC CURRENT Full load A: 1245mA B: 625mA C: 320mA No load A: 70mA C: 25mA FILTER Pi network 84% B: 35mA 82% 83% 83% 82% PROTECTION Fuse recommended OVERLOAD 110 ~ 180% rated output power Protection type : Hiccup mode, recovers automatically after fault condition is removed All output equipped with short circuit SHORT CIRCUIT ENVIRONMENT B: 18 ~ 36VDC Protection type : Hiccup mode, recovers automatically after fault condition is removed WORKING TEMP. WORKING HUMIDITY -40 ~ +71℃ (Refer to "Derating Curve") VIBRATION SAFETY STANDARDS 10 ~ 500Hz, 2G 10min./1 cycle, period for 60min. each along X, Y, Z axes WITHSTAND VOLTAGE I/P-O/P:1.5KVDC ISOLATION RESISTANCE ISOLATION CAPACITANCE I/P-O/P: 100M Ohms / 500VDC / 25℃/ 70% RH 2200pF max. EMC EMISSION EMC IMMUNITY REMOTE CONTROL Compliance to BS EN/EN55032 Class A, FCC part 15 Class A , EAC TP TC 020 Compliance to BS EN/EN61000-4-2,3,4,5,6,8 light industry level, criteria A , EAC TP TC 020 MTBF DIMENSION 600Khrs min. MIL-HDBK-217F(25℃) 31.8*20.3*12.2mm or 1.25"*0.80"*0.48" inch (L*W*H) WEIGHT 18.5g 20% ~ 90% RH non-condensing STORAGE TEMP., HUMIDITY -40 ~ +105℃, 10 ~ 95% RH TEMP. COEFFICIENT ±0.05% / ℃ (0 ~ 50℃) EAC TP TC 020/2011 approved Power ON: R.C. ~ -Vin > 4VDC or open ; Power OFF: R.C. ~ -Vin < 1VDC or short Derating Curve Pin Configuration Mechanical Specification Unit:mm(inch) 22 3 BOTTOM VIEW 16 9 14 11 2.54(0.10) 3.81(0.15) SIDE VIEW 5.08(0.20) 15.24(0.60) 12.2(0.48) Pin No. Output 1 2&3 9 11 14 16 22 & 23 R.C. -Vin N.C. N.C. + Vo u t - Vo u t + Vin 100 LOAD (%) 23 1 2 17.8(0.70) 2.54(0.10) 31.8(1.25) 0.6ψ + 0.2/-0 20.3(0.80) 60 -40 0 25 Pin Size is Tolerance 0.5±0.05mm, Tolerance .X or .XX= ±0.5mm NOTE 50 60 71 100 Ta (℃) 1.All parameters are specified at normal input, rated load, 25℃ 70% RH ambient. 2.Ripple & noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1uf & 47uf capacitor. 3.Line regulation is measured from low line to high line at rated load. 4.Load regulation is measured from 20% to 100% rated load. 5.Please prevent the converter from operating in overload or short circuit condition for more than 30 seconds. ※ Product Liability Disclaimer：For detailed information, please refer to https://www.meanwell.com/serviceDisclaimer.aspx File Name:SCW12-SPEC 2021-11-24 PDF
Документация на SCW12A-05 

SCW12.cdr

Дата модификации: 22.11.2021

Размер: 66.4 Кб

1 стр.

SCW12 12W DC-DC Regulated Single Output Converter series ■ Features : •2:1 wide input range •1500VDC I/O isolation •Built-in remote ON/OFF control •Built-in EMI filter •Protections: Short circuit / Overload •Cooling by free air convection •Five-sided shield metal case •100% full load burn-in test •Low cost / High reliability •Modified models available: output 2.5V/3.3V •2 years warranty SPECIFICATION ORDER NO. OUTPUT SCW12A-05 SCW12B-05 SCW12C-05 SCW12A-12 SCW12B-12 SCW12C-12 SCW12A-15 DC VOLTAGE 5V 12V 15V CURRENT RANGE 480 ~ 2400mA 200 ~ 1000mA 160 ~ 800mA 60mVp-p 60mVp-p 220uF 220uF RATED POWER 12W RIPPLE & NOISE (max.) Note.2 50mVp-p LINE REGULATION Note.3 ±0.5% LOAD REGULATION SCW12B-15 SCW12C-15 85% 83% Note.4 ±0.5% VOLTAGE ACCURACY ±2.0% SWITCHING FREQUENCY 400KHz min. EXTERNAL CAPACITANCE LOAD (max.) 1000uF A: 9 ~ 18VDC VOLTAGE RANGE INPUT PROTECTION (Note. 5) SAFETY OTHERS C: 36 ~ 72VDC EFFICIENCY (Typ.) 82% 83% DC CURRENT Full load A: 1245mA B: 625mA C: 320mA No load A: 70mA C: 25mA FILTER Pi network 84% B: 35mA 82% 83% 83% 82% PROTECTION Fuse recommended OVERLOAD 110 ~ 180% rated output power Protection type : Hiccup mode, recovers automatically after fault condition is removed All output equipped with short circuit SHORT CIRCUIT ENVIRONMENT B: 18 ~ 36VDC Protection type : Hiccup mode, recovers automatically after fault condition is removed WORKING TEMP. WORKING HUMIDITY -40 ~ +71℃ (Refer to "Derating Curve") VIBRATION WITHSTAND VOLTAGE 10 ~ 500Hz, 2G 10min./1 cycle, period for 60min. each along X, Y, Z axes ISOLATION RESISTANCE ISOLATION CAPACITANCE I/P-O/P: 100M Ohms / 500VDC / 25℃/ 70% RH 2200pF max. EMC EMISSION EMC IMMUNITY REMOTE CONTROL Compliance to EN55022 Class A, FCC part 15 Class A Compliance to EN61000-4-2,3,4,5,6,8 light industry level, criteria A Power ON: R.C. ~ -Vin > 4VDC or open ; Power OFF: R.C. ~ -Vin < 1VDC or short MTBF DIMENSION 600Khrs min. MIL-HDBK-217F(25℃) 31.8*20.3*12.2mm or 1.25"*0.80"*0.48" inch (L*W*H) WEIGHT 18.5g 20% ~ 90% RH non-condensing STORAGE TEMP., HUMIDITY -40 ~ +105℃, 10 ~ 95% RH TEMP. COEFFICIENT ±0.05% / ℃ (0 ~ 50℃) I/P-O/P:1.5KVDC Derating Curve Pin Configuration Mechanical Specification Unit:mm(inch) 1 2 22 3 BOTTOM VIEW 16 2.54(0.10) 3.81(0.15) SIDE VIEW 9 5.08(0.20) 14 11 15.24(0.60) NOTE Pin No. Output 1 2&3 9 11 14 16 22 & 23 R.C. - Vi n N.C. N.C. + Vo u t - Vo u t + Vi n 100 LOAD (%) 23 17.8(0.70) 2.54(0.10) 31.8(1.25) 0.6ψ + 0.2/-0 20.3(0.80) 60 -40 0 12.2(0.48) 25 50 60 71 100 Ta (℃) 1.All parameters are specified at normal input, rated load, 25℃ 70% RH ambient. 2.Ripple & noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1uf & 47uf capacitor. 3.Line regulation is measured from low line to high line at rated load. 4.Load regulation is measured from 20% to 100% rated load. 5.Please prevent the converter from operating in overload or short circuit condition for more than 30 seconds. File Name:SCW12-SPEC 2014-08-13 PDF
Документация на серию SCW12 

SCW12.cdr

Дата модификации: 14.08.2014

Размер: 54 Кб

1 стр.

    Товары серии SCW12

    Наименование i Упаковка U вх Выход U вх ном. U1 I1 Шум КПД
    SCW12A-05 (MW)
     
    		DC-DC модульный преобразователь - Примечания: DC-DC, 12Вт, вход 9…18В, выход 5В/2,4А, и... 1 шт
    SCW12A-12 (MW)
     
    		1 шт — — —
    SCW12A-15 (MW)
     
    		1 шт — — —
    SCW12B-05 (MW)
     
    		2 шт — — —
    SCW12B-12 (MW)
     
    		DC-DC модульный преобразователь - Примечания: DC-DC, 12Вт, вход 18…36В, выход 12В/1А, и... 1 шт
    SCW12B-15 (MW)
     
    		— — —
    SCW12C-05 (MW)
     
    		DC-DC модульный преобразователь - Примечания: DC-DC, 12Вт, вход 36…72В, выход 5В/2,4А, ... 1 шт
    SCW12C-12 (MW)
     
    		DC-DC модульный преобразователь - 1 шт
    SCW12C-15 (MW)
     
    		— — —