Серия AC-DC сетевых преобразователей USP-225

Общие характеристики

	Раздел	AC-DC сетевые преобразователи
	Тип стабилизации
	Вход
	Конструктивное исполнение
	Возможности
	Типы защиты	КЗ, перегрузка, перенапряжение, перегрев
	Количество выходов
	Тип управления выходом
	Исполнение
	Входное напряжение AC
	Входное напряжение DC
	Коэффициент мощности
	Напряжение изоляции вход-выход
	Напряжение изоляции вход-земля
	Напряжение изоляции выход-земля
	Применение
	Размер	202×101.5×38 мм
	Рабочая температура

Документация на серию USP-225

USP-225 225W Single Output with PFC Function series ■ Features : Universal AC input / Full range Built in active PFC circuit compliance to EN61000-3-2 Protections: Short circuit / Overload / Over voltage / Over temperature Free air convection for 150W and forced air convection for 225W High power density 4.7w/in Active AC surge current limiting U-bracket low profile:38mm 3 years warranty 3 Bauar t gepruft Sicherheit egel ma ge od o s be wac g SPECIFICATION www. tuv.com ID 2000000000 MODEL USP-225-3.3 USP-225-5 USP-225-12 USP-225-15 USP-225-24 USP-225-48 DC VOLTAGE 3.3V 5V 12V 15V 24V 48V RATED CURRENT 40A 40A 18.7A 15A 9.4A 4.7A CURRENT RANGE 0 ~ 40A 0 ~ 40A 0 ~ 18.7A 0 ~ 15A 0 ~ 9.4A 0 ~ 4.7A RATED POWER 132W 200W 224.4W 225W 225.6W 225.6W 100mVp-p 100mVp-p 100mVp-p 150mVp-p 250mVp-p RIPPLE & NOISE (max.) Note.2 100mVp-p OUTPUT INPUT VOLTAGE ADJ. RANGE 2.97 ~ 3.6V VOLTAGE TOLERANCE Note.3 ±2.0% 10.8 ~ 13.2V 13.5 ~ 16.5V 21.6 ~ 26.4V 43.2 ~ 52.8V ±2.0% ±2.0% ±2.0% ±2.0% LINE REGULATION ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% LOAD REGULATION ±1.0% ±1.0% ±1.0% ±1.0% ±1.0% ±1.0% SETUP, RISE TIME 500ms, 30ms/230VAC HOLD UP TIME (Typ.) 22ms/230VAC VOLTAGE RANGE 90 ~ 264VAC FREQUENCY RANGE 47 ~ 63Hz POWER FACTOR (Typ.) PF>0.93/230VAC EFFICIENCY (Typ.) 72% 77% 84% 85% 86% 2.2A 3.3A AC CURRENT (Typ.) 115VAC 230VAC INRUSH CURRENT (Typ.) PROTECTION 4.5 ~ 5.5V ±2.0% 1.1A 15A/115VAC 1200ms, 30ms/115VAC at full load 22ms/115VAC at full load 127 ~ 370VDC PF>0.97/115VAC at full load 83% 1.6A 35A/230VAC LEAKAGE CURRENT <3.5mA / 240VAC OVERLOAD 105 ~ 150% rated output power Protection type : Constant current limiting, recovers automatically after fault condition is removed OVER VOLTAGE 3.6 ~ 4.4V 5.5 ~ 7.4V 13.2 ~ 16.3V 16.5 ~ 20.2V OVER TEMPERATURE Protection type : Shut down o/p voltage, re-power on to recover Shut down o/p voltage, recovers automatically after temperature goes down WORKING TEMP. -20 ~ +65℃ (Refer to "Derating Curve") WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION -40 ~ +85℃, 10 ~ 95% RH non-condensing ±0.03%/℃ (0 ~ 50℃) 10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes SAFETY STANDARDS UL60950-1, TUV EN60950-1, EAC TP TC 004 approved WITHSTAND VOLTAGE I/P-O/P:3KVAC EMC ISOLATION RESISTANCE EMC EMISSION EMC IMMUNITY I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25℃/ 70% RH Compliance to EN55032 (CISPR32) Class B, EN61000-3-2,-3, EAC TP TC 020 MTBF 220K hrs min. MIL-HDBK-217F (25℃) 202*101.5*38mm (L*W*H) 0.85Kg; 16pcs/14.6Kg/0.76CUFT OTHERS DIMENSION PACKING NOTE 52.8 ~ 64.8V 20 ~ 90% RH non-condensing SAFETY & (Note 4) 26.4 ~ 32.4V I/P-FG:2KVAC O/P-FG:0.5KVAC Compliance to EN61000-4-2,3,4,5,6,8,11, light industry level, criteria A, EAC TP TC 020 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. The power supply is considered a component which will be installed into a final equipment. All the EMC tests are been executed by mounting the unit on a 360mm*360mm metal plate with 1mm of thickness. The final equipment must be re-confirmed that it still meets EMC directives. For guidance on how to perform these EMC tests, please refer to EMI testing of component power supplies. (as available on http://www.meanwell.com) 5. The ambient temperature derating of 3.5℃/1000m with fanless models and of 5℃/1000m with fan models for operating altitude higher than 2000m(6500ft). File Name:USP-225-SPEC 2018-01-15

Документация на USP-225-5

USP-225.cdr

Дата модификации: 04.01.2018

Размер: 90.7 Кб

2 стр.

USP-225 225W Single Output with PFC Function series Features : Universal AC input / Full range Built in active PFC circuit compliance to EN61000-3-2 Protections:Short circuit/Over load/Over voltage/Over temperature Free air convection for 150W and forced air convection for 225W 3 High power density 4.7w/in Active AC surge current limiting U-bracket low profile:38mm 3 years warranty SPECIFICATION MODEL OUTPUT USP-225-3.3 USP-225-5 USP-225-12 USP-225-15 USP-225-24 USP-225-48 DC VOLTAGE 3.3V 5V 12V 15V 24V 48V RATED CURRENT 40A 40A 18.7A 15A 9.4A 4.7A CURRENT RANGE 0 ~ 40A 0 ~ 40A 0 ~ 18.7A 0 ~ 15A 0 ~ 9.4A 0 ~ 4.7A RATED POWER 132W 200W 224.4W 225W 225.6W 225.6W RIPPLE & NOISE (max.) Note.2 100mVp-p 100mVp-p 100mVp-p 100mVp-p 150mVp-p 250mVp-p VOLTAGE ADJ. RANGE 4.5 ~ 5.5V 10.8 ~ 13.2V 13.5 ~ 16.5V 21.6 ~ 26.4V 43.2 ~ 52.8V VOLTAGE TOLERANCE Note.3 INPUT 2.0% 0.5% 0.5% 0.5% LOAD REGULATION 1.0% 1.0% 1.0% 1.0% 1.0% 1.0% SETUP, RISE TIME 500ms, 30ms/230VAC HOLD TIME (Typ.) 22ms/230VAC VOLTAGE RANGE 90 ~ 264VAC FREQUENCY RANGE 47 ~ 63Hz POWER FACTOR (Typ.) PF>0.93/230VAC EFFICIENCY (Typ.) 72% 77% 2.2A 3.3A 115VAC 1.1A 15A/115VAC 1200ms, 30ms/115VAC at full load 22ms/115VAC at full load 127 ~ 370VDC PF>0.97/115VAC at full load 83% 84% 86% <3.5mA / 240VAC OVER LOAD 105 ~ 150% rated output power Protection type : Constant current limiting, recovers automatically after fault condition is removed WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION SAFETY STANDARDS WITHSTAND VOLTAGE 86% 1.6A 30A/230VAC LEAKAGE CURRENT WORKING TEMP. 3.6 ~ 4.4V 5.5 ~ 7.4V 13.2 ~ 16.3V Protection type : Shut down o/p voltage, re-power on to recover 95 5 (RTH2 : Detect on heatsink of power transistor) 16.5 ~ 20.2V 26.4 ~ 32.4V 52.8 ~ 64.8V Protection type : Shut down o/p voltage, recovers automatically after temperature goes down -20 ~ +65 (Refer to output load derating curve) 20 ~ 90% RH non-condensing -40 ~ +85 , 10 ~ 95% RH 0.03%/ (0 ~ 50 10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes UL60950-1, TUV EN60950-1 Approved I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC ISOLATION RESISTANCE I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC EMI CONDUCTION & RADIATION Compliance to EN55022 (CISPR22) Class B HARMONIC CURRENT EMS IMMUNITY MTBF DIMENSION PACKING NOTE 2.0% 0.5% OVER TEMPERATURE OTHERS 2.0% 0.5% PROTECTION OVER VOLTAGE (Note 4) 2.0% 0.5% 230VAC INRUSH CURRENT (Typ.) EMC 2.0% LINE REGULATION AC CURRENT (Typ.) SAFETY & 2.97 ~ 3.6V 2.0% Compliance to EN61000-3-2,-3 Compliance to EN61000-4-2,3,4,5,6,8,11; ENV50204, Light industry level, criteria A 220K hrs min. MIL-HDBK-217F (25 ) 202*101.5*38mm (L*W*H) 0.85Kg; 16pcs/14.6Kg/0.76CUFT 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. File Name:USP-225-SPEC 2006-11-27

Документация на серию USP-225

USP-225.cdr

Дата модификации: 26.12.2006

Размер: 321.2 Кб

2 стр.

найти USP-225.pdf

Товары серии USP-225

Наименование	i	Упаковка	P вых	Выход	U1	I1	КПД	Шум
USP-225-12 (MW)		1 шт
USP-225-15 (MW)
USP-225-24 (MW)		1 шт
USP-225-3.3 (MW)		1 шт
USP-225-48 (MW)		1 шт
USP-225-5 (MW)		1 шт