USP-225-12

MEAN WELL
AC/DC преобразователи открытого типа
развернуть ▼ свернуть ▲
Фотография серии USP-225
Чертеж серии USP-225
 
 

Технические характеристики

показать свернуть
Выходная мощность (ном)
Выход
Напряжение 1 канала
Выходной ток 1 канала
Тип стабилизации
Вход
Конструктивное исполнение
Возможности
Типы защиты КЗ, перегрузка, перенапряжение, перегрев
Количество выходов
Тип управления выходом
Исполнение
Входное напряжение AC
Входное напряжение DC
Коэффициент мощности
Напряжение изоляции вход-выход
Напряжение изоляции вход-земля
Напряжение изоляции выход-земля
Применение
КПД
Шум
Размер 202×101.5×38 мм
Рабочая температура
Нашли ошибку? Выделите её курсором и нажмите CTRL + ENTER

Аналоги 8

показать свернуть
Тип Наименование Корпус Упаковка i P вых Выход U1 I1 Стабилизация Вход Конструктив Возможности Защита Выходов Управление IP U вх AC U вх DC Коэф. мощн. U изол вх-вых U изол вх-земля U изол вых-земля Применение КПД Шум T раб Примечание Карточка
товара
A+ PMR-12V240W1AT (DELTA)
 
—
 
 — — перенапряжение, перегрузка, перегрев, КЗ — — — — — — — — — — —
A+ ENC-240-12 (MW)
 
— 1 шт
 
 КЗ, перенапряжение, перегрев, переполюсовка — — —
A+ LOF225-20B12-C (MORNSUN)
 
— 2 шт КЗ, перегрузка, перенапряжение, перегрев — — — — AC-DC Power Factor Correction Module
A+ NPB-240-12XLR (MW)
 
— КЗ, перенапряжение, перегрев, переполюсовка — —
A+ NPB-240-12TB (MW)
 
— в коробках 10 шт КЗ, перенапряжение, перегрев, переполюсовка — —
A+ NPB-240-12AD1 (MW)
 
— КЗ, перенапряжение, перегрев, переполюсовка — —
A+ S-210-12 (MW)
 
— AC-DC сетевой преобразователь - P вых: 204 Вт; Выход: 12 В; U1: 10...13.2 В; I1: до 17 ... КЗ, перегрузка, перенапряжение, перегрев —
A+ HEP-320-12A (MW)
 
— 1 шт КЗ, перегрузка, перенапряжение, перегрев —

Файлы 2

показать свернуть
USP-225 225W Single Output with PFC Function series ■ Features : Universal AC input / Full range Built in active PFC circuit compliance to EN61000-3-2 Protections: Short circuit / Overload / Over voltage / Over temperature Free air convection for 150W and forced air convection for 225W High power density 4.7w/in Active AC surge current limiting U-bracket low profile:38mm 3 years warranty 3 Bauar t gepruft Sicherheit egel ma ge od o s be wac g SPECIFICATION www. tuv.com ID 2000000000 MODEL USP-225-3.3 USP-225-5 USP-225-12 USP-225-15 USP-225-24 USP-225-48 DC VOLTAGE 3.3V 5V 12V 15V 24V 48V RATED CURRENT 40A 40A 18.7A 15A 9.4A 4.7A CURRENT RANGE 0 ~ 40A 0 ~ 40A 0 ~ 18.7A 0 ~ 15A 0 ~ 9.4A 0 ~ 4.7A RATED POWER 132W 200W 224.4W 225W 225.6W 225.6W 100mVp-p 100mVp-p 100mVp-p 150mVp-p 250mVp-p RIPPLE & NOISE (max.) Note.2 100mVp-p OUTPUT INPUT VOLTAGE ADJ. RANGE 2.97 ~ 3.6V VOLTAGE TOLERANCE Note.3 ±2.0% 10.8 ~ 13.2V 13.5 ~ 16.5V 21.6 ~ 26.4V 43.2 ~ 52.8V ±2.0% ±2.0% ±2.0% ±2.0% LINE REGULATION ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% LOAD REGULATION ±1.0% ±1.0% ±1.0% ±1.0% ±1.0% ±1.0% SETUP, RISE TIME 500ms, 30ms/230VAC HOLD UP TIME (Typ.) 22ms/230VAC VOLTAGE RANGE 90 ~ 264VAC FREQUENCY RANGE 47 ~ 63Hz POWER FACTOR (Typ.) PF>0.93/230VAC EFFICIENCY (Typ.) 72% 77% 84% 85% 86% 2.2A 3.3A AC CURRENT (Typ.) 115VAC 230VAC INRUSH CURRENT (Typ.) PROTECTION 4.5 ~ 5.5V ±2.0% 1.1A 15A/115VAC 1200ms, 30ms/115VAC at full load 22ms/115VAC at full load 127 ~ 370VDC PF>0.97/115VAC at full load 83% 1.6A 35A/230VAC LEAKAGE CURRENT <3.5mA / 240VAC OVERLOAD 105 ~ 150% rated output power Protection type : Constant current limiting, recovers automatically after fault condition is removed OVER VOLTAGE 3.6 ~ 4.4V 5.5 ~ 7.4V 13.2 ~ 16.3V 16.5 ~ 20.2V OVER TEMPERATURE Protection type : Shut down o/p voltage, re-power on to recover Shut down o/p voltage, recovers automatically after temperature goes down WORKING TEMP. -20 ~ +65℃ (Refer to "Derating Curve") WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION -40 ~ +85℃, 10 ~ 95% RH non-condensing ±0.03%/℃ (0 ~ 50℃) 10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes SAFETY STANDARDS UL60950-1, TUV EN60950-1, EAC TP TC 004 approved WITHSTAND VOLTAGE I/P-O/P:3KVAC EMC ISOLATION RESISTANCE EMC EMISSION EMC IMMUNITY I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25℃/ 70% RH Compliance to EN55032 (CISPR32) Class B, EN61000-3-2,-3, EAC TP TC 020 MTBF 220K hrs min. MIL-HDBK-217F (25℃) 202*101.5*38mm (L*W*H) 0.85Kg; 16pcs/14.6Kg/0.76CUFT OTHERS DIMENSION PACKING NOTE 52.8 ~ 64.8V 20 ~ 90% RH non-condensing SAFETY & (Note 4) 26.4 ~ 32.4V I/P-FG:2KVAC O/P-FG:0.5KVAC Compliance to EN61000-4-2,3,4,5,6,8,11, light industry level, criteria A, EAC TP TC 020 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. The power supply is considered a component which will be installed into a final equipment. All the EMC tests are been executed by mounting the unit on a 360mm*360mm metal plate with 1mm of thickness. The final equipment must be re-confirmed that it still meets EMC directives. For guidance on how to perform these EMC tests, please refer to “EMI testing of component power supplies.” (as available on http://www.meanwell.com) 5. The ambient temperature derating of 3.5℃/1000m with fanless models and of 5℃/1000m with fan models for operating altitude higher than 2000m(6500ft). File Name:USP-225-SPEC 2018-01-15 PDF
Документация на USP-225-5 

USP-225.cdr

Дата модификации: 04.01.2018

Размер: 90.7 Кб

2 стр.

USP-225 225W Single Output with PFC Function series Features : Universal AC input / Full range Built in active PFC circuit compliance to EN61000-3-2 Protections:Short circuit/Over load/Over voltage/Over temperature Free air convection for 150W and forced air convection for 225W 3 High power density 4.7w/in Active AC surge current limiting U-bracket low profile:38mm 3 years warranty SPECIFICATION MODEL OUTPUT USP-225-3.3 USP-225-5 USP-225-12 USP-225-15 USP-225-24 USP-225-48 DC VOLTAGE 3.3V 5V 12V 15V 24V 48V RATED CURRENT 40A 40A 18.7A 15A 9.4A 4.7A CURRENT RANGE 0 ~ 40A 0 ~ 40A 0 ~ 18.7A 0 ~ 15A 0 ~ 9.4A 0 ~ 4.7A RATED POWER 132W 200W 224.4W 225W 225.6W 225.6W RIPPLE & NOISE (max.) Note.2 100mVp-p 100mVp-p 100mVp-p 100mVp-p 150mVp-p 250mVp-p VOLTAGE ADJ. RANGE 4.5 ~ 5.5V 10.8 ~ 13.2V 13.5 ~ 16.5V 21.6 ~ 26.4V 43.2 ~ 52.8V VOLTAGE TOLERANCE Note.3 INPUT 2.0% 0.5% 0.5% 0.5% LOAD REGULATION 1.0% 1.0% 1.0% 1.0% 1.0% 1.0% SETUP, RISE TIME 500ms, 30ms/230VAC HOLD TIME (Typ.) 22ms/230VAC VOLTAGE RANGE 90 ~ 264VAC FREQUENCY RANGE 47 ~ 63Hz POWER FACTOR (Typ.) PF>0.93/230VAC EFFICIENCY (Typ.) 72% 77% 2.2A 3.3A 115VAC 1.1A 15A/115VAC 1200ms, 30ms/115VAC at full load 22ms/115VAC at full load 127 ~ 370VDC PF>0.97/115VAC at full load 83% 84% 86% <3.5mA / 240VAC OVER LOAD 105 ~ 150% rated output power Protection type : Constant current limiting, recovers automatically after fault condition is removed WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION SAFETY STANDARDS WITHSTAND VOLTAGE 86% 1.6A 30A/230VAC LEAKAGE CURRENT WORKING TEMP. 3.6 ~ 4.4V 5.5 ~ 7.4V 13.2 ~ 16.3V Protection type : Shut down o/p voltage, re-power on to recover 95 5 (RTH2 : Detect on heatsink of power transistor) 16.5 ~ 20.2V 26.4 ~ 32.4V 52.8 ~ 64.8V Protection type : Shut down o/p voltage, recovers automatically after temperature goes down -20 ~ +65 (Refer to output load derating curve) 20 ~ 90% RH non-condensing -40 ~ +85 , 10 ~ 95% RH 0.03%/ (0 ~ 50 10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes UL60950-1, TUV EN60950-1 Approved I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC ISOLATION RESISTANCE I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC EMI CONDUCTION & RADIATION Compliance to EN55022 (CISPR22) Class B HARMONIC CURRENT EMS IMMUNITY MTBF DIMENSION PACKING NOTE 2.0% 0.5% OVER TEMPERATURE OTHERS 2.0% 0.5% PROTECTION OVER VOLTAGE (Note 4) 2.0% 0.5% 230VAC INRUSH CURRENT (Typ.) EMC 2.0% LINE REGULATION AC CURRENT (Typ.) SAFETY & 2.97 ~ 3.6V 2.0% Compliance to EN61000-3-2,-3 Compliance to EN61000-4-2,3,4,5,6,8,11; ENV50204, Light industry level, criteria A 220K hrs min. MIL-HDBK-217F (25 ) 202*101.5*38mm (L*W*H) 0.85Kg; 16pcs/14.6Kg/0.76CUFT 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. File Name:USP-225-SPEC 2006-11-27 PDF
Документация на серию USP-225 

USP-225.cdr

Дата модификации: 26.12.2006

Размер: 321.2 Кб

2 стр.

    Внимание! Точность указанного на сайте описания товара не может быть гарантирована. Для получения более полной и точной информации о товаре смотрите техническое описание (Datasheet) на сайте производителя.

    ADD-155B (MW)