Серия алюминиевых конденсаторов SEPG_OSCON

Общие характеристики

	Раздел	Алюминиевые конденсаторы
	Допуск по ёмкости
	Напряжение номинальное
	Температура рабочая
	Срок службы
	Способ монтажа

Документация на серию SEPG_OSCON

2019 Products Catalog Conductive Polymer Aluminum Solid Capacitors  PDF

Документация на семейство OSCON 

Products catalog

Дата модификации: 28.01.2019

Размер: 1.3 Мб

48 стр.

Conductive Polymer Aluminum Solid Capacitors Radial Lead Type Series: SEPG UP GRADE Features ● High ripple current (6100 mA.r.m.s. max.) ● RoHS compliance, Halogen free Specifications Size code C9 E9 E13 –55 ℃ to +105 ℃ 16 V.DC Rated voltage range 270 μF 470 μF 560 μF Rated cap. range Capacitance tolerance ±20 % (120 Hz / +20 ℃) Please see the attached characteristics list Leakage current Dissipation factor (tan δ) Please see the attached characteristics list +105 ℃, 5000 h, rated voltage applied Capacitance change Within ±20 % of the initial value Endurance Dissipation factor (tan δ) ≦ 200 % of the initial limit DC leakage current Within the initial limit +60 °C, 90 % to 95 %, 1000 h, No-applied voltage Damp heat Capacitance change Within ±20 % of the initial value （Steady State） Dissipation factor (tan δ) ≦ 150 % of the initial limit DC leakage current Within the initial limit (after voltage processing) Category temp. range Dimensions (not to scale) ⊕ ΦD±0.5 Lot No. marking(–) Series Φd ⊖ ⊕ ΦD±0.5 Polarity ・C9、C10、E9 size Φd ⊖ 15 min. 4 min. 15 min. 4 min. L F ・E13 size F Marking C10 L 19 min. 19 min. C9、C10、E9 size flat rubber is used. R.voltage R. capacitance （V.DC) (μF) Size code C9 C10 E9 E13 φD±0.5 6.3 6.3 8.0 8.0 L max. 9.0 10.0 9.0 13.0 F±0.5 2.5 2.5 3.5 3.5 Unit：ｍｍ φd±0.05 0.6 0.5 0.6 0.6 Characteristics list Rated Rated vol. cap. (V.DC (±20 %) (μF) ) 270 16 NEW 470 560 Case size (mm) φD L Size code 6.3 6.3 8.0 8.0 8.9 9.9 8.9 12.9 C9 C10 E9 E13 Specifications Ripple current *1 (mA r.m.s.) 5040 5800 5400 6100 ESR*2 (mΩ) tan δ*3 LC*4 （μA） Part number 10 8 8 8 0.12 0.12 0.12 0.12 864 864 1504 1792 16SEPG270W 16SEPG270M 16SEPG470M 16SEPG560M *1: Ripple curren（100 kHz / +105 ℃） *2: ESR（100 kHz / +20 ℃） *3: tan δ (120 Hz / +20 ℃) *4: After 2 minutes ・Please refer to each page in this catarog for “Flow conditions” and “Taping specifications”. Frequency correction factor for ripple current Frequency(f) Coefficient 120 Hz ≦ f＜ 1 kHz 0.05 1 kHz ≦ f＜ 10 kHz 0.3 10 kHz ≦ f＜ 100 kHz 100 kHz ≦ f＜ 500 kHz 0.7 1 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 28-Jan-19  PDF

Документация на серию SEPG_OSCON 

Series catalog

Дата модификации: 28.01.2019

Размер: 272.2 Кб

1 стр.

• найти SEPG_OSCON.pdf

Товары серии SEPG_OSCON

Наименование	i	Упаковка	Ёмкость	Диаметр	Высота	Шаг	ESR	Ток пульсаций НЧ	Размер
16SEPG270M (PAN)		500 шт							6.3×6.3×10 мм
16SEPG270W (PAN)		500 шт							6.3×6.3×9 мм
16SEPG470M (PAN)		200 шт							8×8×9 мм
16SEPG560M (PAN)		200 шт							8×8×13 мм