16SEPG560M

Panasonic Industrial Europe GmbH
Конденсатор алюминиевый 16 В x 560 мкФ ±20%, Radial, -55...105 °C, 5000 ч
развернуть ▼ свернуть ▲
Внешний вид серии SEPG_OSCON

Технические характеристики

показать свернуть
Ёмкость номинальная
Допуск по ёмкости
Напряжение номинальное
Температура рабочая
Срок службы
Диаметр корпуса
Высота корпуса
Способ монтажа
Шаг между выводами
Эквивалентное последовательное сопротивление
Ток пульсаций низких частот
Диаметр x Высота 8×8×13 мм
  Примечание: High ripple current (6100 mA.r.m.s) / 5000h endurance at 105 degrees / RoHs compliance, Halogen free
Нашли ошибку? Выделите её курсором и нажмите CTRL + ENTER

Аналоги 19

показать свернуть
Тип Наименование Корпус Упаковка i Ёмкость Допуск Напряжение Температура рабочая Срок службы Диаметр Высота Способ монтажа Шаг ESR Импеданс Ток пульсаций НЧ Ток пульсаций ВЧ Применение Примечание Карточка
товара
A+ EEUFR1E561L (PAN)
 
— 200 шт — — — —
A+ 16SEPF560M (PAN)
 
— 200 шт — — — High Voltage / Large capacitance
A+ 16SEPF560M+TSS (PAN)
 
— 1000 шт — — — High Voltage / Large capacitance
A+ EEUFC1C561 (PAN)
 
— 200 шт — — — —
A+ EEUFC1C561B (PAN)
 
— 500 шт — — — —
A+ EEHAZKE561UB (PAN)
 
—
 
 — — — — Aluminum Electrolytic Capacitor, Polarized, Aluminum (solid Polymer), 25V, 20% +Tol, 20% -Tol, 560uF, Through Hole Mount
A+ EEHAZS1E561B (PAN)
 
—
 
 — — — — Aluminum Electrolytic Capacitor, Polarized, Aluminum (solid Polymer), 25V, 20% +Tol, 20% -Tol, 560uF, Through Hole Mount
A+ EEU-FR1E561L (PAN)
 
— 1 шт — — — —
A+ 20SEPF560M (PAN)
 
— 200 шт — — — High Voltage / Large capacitance
A+ 20SEPF560M+T (PAN)
 
— 500 шт — — — High Voltage / Large capacitance
A+ EEUFC1E561 (PAN)
 
— 200 шт — — — —
A+ EEUFC1E561B (PAN)
 
— 500 шт — — — —
A+ EEUFC1E561S (PAN)
 
— 200 шт — — — —
A+ EEUFK1E561 (PAN)
 
— 200 шт — — — —
A+ EEUFK1E561L (PAN)
 
— 200 шт — — — —
A+ EEE-FT1V561AP (PAN)
 
— — — — —
A+ EEE-FT1V561AP-Cut Tape (PAN)
 
—
 
 — — — —
A+ EEUFR1E561LB (PAN)
 
— 1000 шт — — — —
A+ 16SEF560M (PAN)
 
— 200 шт — — — High Voltage(35V DC max), Large Capacitance, / 1000h at 125°C

Файлы 3

показать свернуть
Conductive Polymer Aluminum Solid Capacitors UPGRADE Radial Lead Type SEPG series Features ● High ripple current (6100 mA rms max.) ● RoHS compliance, Halogen free Specifications Size code Category temp. range Rated voltage range Rated cap. range Capacitance tolerance Leakage current B9 C10 E9 –55 ℃ to +105 ℃ 16 V 150 μF 270 μF 470 μF ±20 % (120 Hz / +20 ℃) Please see the attached characteristics list Dissipation factor (tan δ) Please see the attached characteristics list +105 ℃ 5000 h, rated voltage applied Capacitance change Within ±20 % of the initial value Endurance Dissipation factor (tan δ) ≦ 200 % of the initial limit DC leakage current Within the initial limit +60 °C, 90 % to 95 %, 1000 h, No-applied voltage Damp heat Capacitance change Within ±20 % of the initial value Dissipation factor (tan δ) ≦ 150 % of the initial limit （Steady State） DC leakage current Within the initial limit (after voltage processing) ød ⊕ ⊖ ⊕ øD Lot No. Series code* ・B9, C9, C10, E9 size ød øD marking(–) 560 μF ⊖ 15 min. 4 min. 15 min. 4 min. L F ・E13 size Polarity E13 Dimensions (not to scale) F Marking C9 L 19 min. 19 min. B9, C9, C10, E9 size flat rubber is used. R.voltage (V) Size code B9 C9 C10 E9 E13 R. capacitance (μF) * Depends on the case size. øD±0.5 5.0 6.3 6.3 8.0 8.0 L max. 9.0 9.0 10.0 9.0 13.0 F±0.5 2.0 2.5 2.5 3.5 3.5 Unit：ｍｍ ød±0.05 0.6 0.6 0.5 0.6 0.6 Characteristics list Rated Case size Rated capacitance voltage (±20 %) (V) (μF) NEW 16 150 270 470 560 (mm) øD 5.0 6.3 6.3 8.0 8.0 L 9.0 9.0 10.0 9.0 13.0 Size code B9 C9 C10 E9 E13 Specifications Ripple ESR*2 current *1 (mΩ max.) 4500 5040 5800 5400 6100 12 10 8 8 8 (mA rms) tan δ*3 0.12 0.12 0.12 0.12 0.12 Part number LC*4 (μA） 480 864 864 1504 1792 Click here for part number list of lead terminal cutting and lead terminal taping 16SEPG150M 16SEPG270W 16SEPG270M 16SEPG470M 16SEPG560M *1: Ripple curren（100 kHz / +105 ℃） *2: ESR（100 kHz / +20 ℃） *3: tan δ (120 Hz / +20 ℃) *4: After 2 minutes ◆ Please refer to each page in this catarog for “Flow conditions” and “Taping specifications”. Frequency correction factor for ripple current Frequency(f) Coefficient 120 Hz ≦ f < 1 kHz 0.05 1 kHz ≦ f < 10 kHz 0.3 10 kHz ≦ f < 100 kHz 0.7 100 kHz ≦ f < 500 kHz 1 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 30-Nov-20 PDF
Документация на 16SEPG560M 

Series catalog

Дата модификации: 15.06.2021

Размер: 595 Кб

8 стр.

2019 Products Catalog Conductive Polymer Aluminum Solid Capacitors PDF
Документация на семейство OSCON 

Products catalog

Дата модификации: 28.01.2019

Размер: 1.3 Мб

48 стр.

Conductive Polymer Aluminum Solid Capacitors Radial Lead Type Series: SEPG UP GRADE Features ● High ripple current (6100 mA.r.m.s. max.) ● RoHS compliance, Halogen free Specifications Size code C9 E9 E13 –55 ℃ to +105 ℃ 16 V.DC Rated voltage range 270 μF 470 μF 560 μF Rated cap. range Capacitance tolerance ±20 % (120 Hz / +20 ℃) Please see the attached characteristics list Leakage current Dissipation factor (tan δ) Please see the attached characteristics list +105 ℃, 5000 h, rated voltage applied Capacitance change Within ±20 % of the initial value Endurance Dissipation factor (tan δ) ≦ 200 % of the initial limit DC leakage current Within the initial limit +60 °C, 90 % to 95 %, 1000 h, No-applied voltage Damp heat Capacitance change Within ±20 % of the initial value （Steady State） Dissipation factor (tan δ) ≦ 150 % of the initial limit DC leakage current Within the initial limit (after voltage processing) Category temp. range Dimensions (not to scale) ⊕ ΦD±0.5 Lot No. marking(–) Series Φd ⊖ ⊕ ΦD±0.5 Polarity ・C9、C10、E9 size Φd ⊖ 15 min. 4 min. 15 min. 4 min. L F ・E13 size F Marking C10 L 19 min. 19 min. C9、C10、E9 size flat rubber is used. R.voltage R. capacitance （V.DC) (μF) Size code C9 C10 E9 E13 φD±0.5 6.3 6.3 8.0 8.0 L max. 9.0 10.0 9.0 13.0 F±0.5 2.5 2.5 3.5 3.5 Unit：ｍｍ φd±0.05 0.6 0.5 0.6 0.6 Characteristics list Rated Rated vol. cap. (V.DC (±20 %) (μF) ) 270 16 NEW 470 560 Case size (mm) φD L Size code 6.3 6.3 8.0 8.0 8.9 9.9 8.9 12.9 C9 C10 E9 E13 Specifications Ripple current *1 (mA r.m.s.) 5040 5800 5400 6100 ESR*2 (mΩ) tan δ*3 LC*4 （μA） Part number 10 8 8 8 0.12 0.12 0.12 0.12 864 864 1504 1792 16SEPG270W 16SEPG270M 16SEPG470M 16SEPG560M *1: Ripple curren（100 kHz / +105 ℃） *2: ESR（100 kHz / +20 ℃） *3: tan δ (120 Hz / +20 ℃) *4: After 2 minutes ・Please refer to each page in this catarog for “Flow conditions” and “Taping specifications”. Frequency correction factor for ripple current Frequency(f) Coefficient 120 Hz ≦ f＜ 1 kHz 0.05 1 kHz ≦ f＜ 10 kHz 0.3 10 kHz ≦ f＜ 100 kHz 100 kHz ≦ f＜ 500 kHz 0.7 1 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 28-Jan-19 PDF
Документация на серию SEPG_OSCON 

Series catalog

Дата модификации: 28.01.2019

Размер: 272.2 Кб

1 стр.

    Внимание! Точность указанного на сайте описания товара не может быть гарантирована. Для получения более полной и точной информации о товаре смотрите техническое описание (Datasheet) на сайте производителя.

    FX22V183YF196 (HIT-AIC)