Серия танталовых конденсаторов TPE

Panasonic Industrial Europe GmbH

Общие характеристики

	Раздел	Танталовые конденсаторы
	Допуск по ёмкости
	Код корпуса производителя
	Температура рабочая
	Способ монтажа

Документация на серию TPE

Conductive Polymer Tantalum Solid Capacitors Surface Mount Type Series : TPE Size : B Features ● Small size (L 3.5×W 2.8×H 1.9 mm) ESR (15 mΩ) ● RoHS compliance, Halogen free ● Low Specifications Size code B2 Category temperature range –55 °C to +105 °C Rated voltage range 2.0 V.DC to 10 V.DC Category voltage range 1.8 V.DC to 8.0 V.DC Rated capacitance range 47 μF to 470 μF Capacitance tolerance ±20 % (120 Hz / + 20 °C) Leakage current Please see the attached characteristics list Dissipation factor (tan d) Please see the attached characteristics list Rated voltage × 1.15 +105 °C, 1000 h rated voltage applied ✽ Rated temp, +85 °C Products : +85 °C, 1000 h, rated voltage applied Capacitance change Within ±20 % of the initial value Surge voltage (V.DC) Endurance < 1.5 times of the initial limit tan d DC leakage current Within the initial limit +60 °C, 90 % to 95 %, 500 h, No-applied voltage Within +50 %, −20 % of the initial value (2R5TPE220MAZB (MAPB, MAFB), 2R5TPE330MAZB, Capacitance change 2TPE330MAFB (MADGB), 2TPE470MAJGB (MAFB), 2TPE330MFB, ETPE330MAFB (MA9GB)) Within +40 %, −20 % of the initial value (Except for above model) Damp heat (Steady State) < 1.5 times of the initial limit tan d DC leakage current < 3 times of the initial limit Marking Dimensions (not to scale) L R.Cap. code W Polarity marking(+) Lot. No. H R. Voltage code R. Voltage (V.DC) Code 2.0 d R. Cap. (μF) Code 47 S7 2.5 e 100 A8 4.0 g 120 C8 6.3 j 150 E8 220 J8 8.0 k 330 N8 10.0 A 470 S8 S S W1 Unit : mm Size code L±0.2 B2 3.5 W±0.2 2.8 H±0.1 1.9 S±0.2 0.8 W1±0.1 2.2 ✽ Externals of ﬁgure are the reference. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 05 Jun. 2018

Документация на серию TPE

Series catalog

Дата модификации: 12.06.2018

Размер: 115.4 Кб

4 стр.

RoHS compliance Solid Electrolytic Capacitors with Polymerized Organic Semiconductor TPESeries Low ESR Products (D2E, D3L, D4 Size) Fe a tu re TPE series has low ESR and can aid in the miniaturization of many products. Specifications Items Condition Characteristics — –55 to +105 (°C) Rated capacitance range 120Hz/20°C 68 to 1500 (µF) Capacitance tolerance 120Hz/20°C _ 20% M:+ Operating Temperature range 2.5 to 10 (V.DC) — Rated voltage ≤ 10.0 (%) 120Hz/20°C Dissipation Factor (D.F.) ( ) *D4size:≤ 15.0 % Rated voltage applied, after 5 minutes Please see the attached characteristics list Equivalent series resistance (E.S.R. mΩmax.) 100kHz/20°C Please see the attached characteristics list Temperature characteristics of Impedance ratio 100kHz/+20°C Leakage current –55°C Z/Z20°C +105°C Z/Z20°C 105°C,2000h, rated voltage applied Rated temp. 85°C products: 85°C, 1000h, rated voltage applied Endurance * _ 20% of the initial value Within+ D.F. ≤ 1.5 times the initial limit ≤ The initial limit Within+50%, –20% of the initial value (2R5TPE470M (I,F,C,9,7), 2R5TPE330M (I,F,C,9,7), 2R5TPE220M (I,F,C,9,7) ,2R5TPE1000M (I,F) ,2R5TPE1500M (F,C) ∆C/C Within+40%, –20% of the initial value (Except for the above model) D.F. 105°C,1000 cycles, 1kΩ discharge resistance, surge voltage applied 6TPE330MAP,16TPE220MAP:85°C Surge 0.6 to 1.0 ∆C/C L.C. 60°C,90 to 95%RH,500h, No voltage applied Damp heat (Steady state) 1.0 to 2.0 * Dimensions ≤ 1.5 times the initial limit L.C. ≤ 3 times the initial limit ∆C/C _ 5% of the initial value Within+ D.F. ≤ The initial limit L.C. ≤ 3 times the initial limit Size List L RV (SV) µF 2.5 (3.2) 4.0 (5.0) W 68 D2E H 150 W1 S (unit: mm) T P E Size L W H*1 S W1 code (±0.3) (±0.2) (±0.2) (±0.2) (±0.1) D2E 7.3 4.3 1.8 1.3 2.4 D3L 7.3 4.3 2.8 1.3 2.4 D4 7.3 4.3 3.8 1.3 2.4 * 28 1 ±0.1:D2E 10.0 (13.0) D2E 100 S 6.3 (8.0) D2E D2E 220 D2E D2E D2E D3L 330 D2E D2E D2E,D3L D4 470 D2E D3L D4 680 D3L D4 D4 1000 D4

Документация на 2R5TPE1000M

Дата модификации: 13.11.2007

Размер: 87.2 Кб

2 стр.

найти TPE.pdf

Товары серии TPE

Наименование	i	Упаковка	Ёмкость	Напряжение	Ток утечки	Размер	ESR
2R5TPE1000M (PAN)						7.3×4.3×3.8 мм	—
2R5TPE220MC (PAN)						7.3×4.3×1.8 мм
2R5TPE220MDGB (PAN)						3.5×2.8×1.9 мм
2R5TPE220MIB (PAN)						3.5×2.8×1.9 мм
4TPE150MAUB (PAN)						3.5×2.8×1.9 мм
4TPE680M (PAN)						7.3×4.3×3.8 мм	—
4TPE680MI (PAN)						7.3×4.3×3.8 мм
6TPE220MAPB (PAN)		2000 шт				3.5×2.8×1.9 мм

TPE публикации

25 сентября 2019

статья

Конденсаторы Panasonic. Часть 4. Полимеры – номенклатура

Виктор Чистяков (г. Малоярославец) В последней части цикла статей о конденсаторах Panasonic – полная номенклатура всех серий наиболее современных конденсаторов, полимерных, а также расшифровка кодов для их заказа. В заключительной, четвертой... ...читать