Серия алюминиевых конденсаторов ZE_HYBRID

Общие характеристики

Раздел Алюминиевые конденсаторы
Допуск ёмкости
Высота корпуса
Рабочая температура
Срок службы
Способ монтажа

Документация на серию ZE_HYBRID

Conductive Polymer Hybrid Aluminum Electrolytic Capacitors Surface Mount Type Series: ZE Type: V High temperature lead-free reflow ● ● ● ● Features Endurance: 2000 h at 145 °C (High temperature / Long life) Low ESR and high ripple current (85 % over, Lower ESR than current V-TP) High-withstand voltage ( to 63 V.DC), Low LC (0.01 CV or 3 μA) Equivalent to conductive polymer type aluminum electrolytic capacitor (There are little characteristics change by temperature and frequency) ● Vibration-proof product is available upon request. (φ8 mm and larger) ● AEC-Q200 compliant ● RoHS directive compliant Specifications Size code Category temp. range Rated voltage range Nominal cap.range Capacitance tolerance DC leakage current F G –55 ℃ to +145 ℃ 25 V.DC to 63 V.DC 33 μF to 220 μF 56 μF to 330 μF ±20 % (120 Hz / +20 ℃) I ≦ 0.01 CV or 3 (μA) After 2 minutes (whichever is greater) Dissipation factor (tan δ) Please see the attached characteristics list +145 °C ± 2 °C, 2000 h, apply the rated ripple current without exceeding the rated voltage Capacitance change Within ±30% of the initial value Endurance 1 Dissipation factor (tan δ) ≦ 200 % of the initial limit E.S.R. ≦ 200 % of the initial limit DC leakage current Within the initial limit +135 °C ± 2 °C, 4000 h, apply the rated ripple current without exceeding the rated voltage Capacitance change Within ±30% of the initial value Endurance 2 Dissipation factor (tan δ) ≦ 200 % of the initial limit E.S.R. ≦ 200 % of the initial limit DC leakage current Within the initial limit After storage for 1000 hours at +145 °C±2 °C with no voltage applied and then being Shelf life stabilized at +20 °C, capacitors shall meet the limits specified in endurance 1. (With voltage treatment) 85 °C ± 2 °C, 85 % to 90 %, 2000 h, rated voltage applied Capacitance change Within ±30% of the initial value Damp heat Dissipation factor (tan δ) ≦ 200 % of the initial limit (Load) E.S.R. ≦ 200 % of the initial limit DC leakage current Within the initial limit After reflow soldering and then being stabilized at +20 °C, capacitors shall meet the following limits. Resistance to Capacitance change Within ±10% of the initial value soldering heat Dissipation factor (tan δ) Within the initial limit DC leakage current Within the initial limit Series identification (P) H Capacitance (μF) B±0.2 220 E ZE φD±0.5 Negative polarity marking (–) A±0.2 – + L W Pressure Relief (φ10 and larger) Rated voltage mark ( )Reference size Lot number Rated voltage mark 25 E 35 V H J Unit:V.DC 50 63 (I) 0.3 max. Example : 25 V.DC 220 μF Marking color : BLACK (I) Dimensions (not to scale) K Marking Size code F G φD L A、B H I W P Unit:mm K 8.0 10.2±0.3 8.3 10.0 max. 3.4 0.90±0.2 3.1 0.70±0.2 10.0 10.2±0.3 10.3 12.0 max. 3.5 0.90±0.2 4.6 0.70±0.2 ·The dimensions of the vibration-proof products, please refer to the page of the mounting specification. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 04-Dec-18 PDF
Документация на серию ZE 

Series catalog

Дата модификации: 07.12.2018

Размер: 348.3 Кб

2 стр.

    Товары серии ZE_HYBRID

    Наименование i Упаковка Ёмкость Напряжение Диаметр
    EEHZE1E221P (PAN) 500 шт
    EEHZE1E221V (PAN) 500 шт
    EEHZE1E331P (PAN) 500 шт
    EEHZE1E331V (PAN) 500 шт
    EEHZE1H101FV (PAN) 500 шт
    EEHZE1H101P (PAN) 500 шт
    EEHZE1H101V (PAN) 500 шт
    EEHZE1H680FV (PAN) 500 шт
    EEHZE1H680P (PAN) 500 шт
    EEHZE1H680V (PAN) 500 шт
    EEHZE1J330P (PAN) 500 шт
    EEHZE1J330V (PAN) 500 шт
    EEHZE1J560P (PAN) 500 шт
    EEHZE1J560V (PAN) 500 шт
    EEHZE1V151P (PAN) 500 шт
    EEHZE1V151V (PAN) 500 шт
    EEHZE1V271P (PAN) 500 шт
    EEHZE1V271V (PAN) 500 шт