EEHZE1J330V

Конденсатор алюминиевый 63 В x 33 мкФ ±20%, SMD, -55...145 °C, 2000 ч
развернуть ▼ свернуть ▲

Технические характеристики

показать свернуть
Ёмкость номинальная
Допуск по ёмкости
Напряжение номинальное
Температура рабочая
Срок службы
Диаметр корпуса
Высота корпуса
Способ монтажа
Эквивалентное последовательное сопротивление
Ток пульсаций низких частот
Диаметр x Высота 8×8×8.3 мм
Примечание Hybrid, Low ESR & High Temp; anti vibration
Нашли ошибку? Выделите её курсором и нажмите CTRL + ENTER

Аналоги 25

показать свернуть
Тип Наименование Корпус Упаковка i Ёмкость Допуск Напряжение Температура рабочая Срок службы Диаметр Высота Способ монтажа Шаг ESR Импеданс Ток пульсаций НЧ Ток пульсаций ВЧ Применение Примечание Карточка
товара
A+ CGS100M330G10PKKKV00R (SUSCON)
 
в ленте 3000 шт
A+ EEEFK1J330P (PAN)
 
в ленте 500 шт Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 63V, 20% +Tol, 20% -Tol, 33uF, Surface Mount, 3333
A+ EEEFK1K330P (PAN)
 
в ленте 500 шт Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 80V, 20% +Tol, 20% -Tol, 33uF, Surface Mount, 3333
A+ EEEFK2A330P (PAN)
 
в ленте 500 шт Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 100V, 20% +Tol, 20% -Tol, 33uF, Surface Mount, 4141
A+ EEHZA1K330P (PAN)
 
в ленте 500 шт
A+ EEE2AA330P (PAN)
 
в ленте 500 шт Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 100V, 20% +Tol, 20% -Tol, 33uF, Surface Mount, 4141
A+ EEETG1J330P (PAN)
 
500 шт Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 63V, 20% +Tol, 20% -Tol, 33uF, Surface Mount, 4141
A+ EEETG1J330UP (PAN)
 
500 шт Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 63V, 20% +Tol, 20% -Tol, 33uF, Surface Mount, 3333
A+ EEETG1K330P (PAN)
 
500 шт Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 80V, 20% +Tol, 20% -Tol, 33uF, Surface Mount, 4141
A+ EEETG1K330UP (PAN)
 
500 шт Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 80V, 20% +Tol, 20% -Tol, 33uF, Surface Mount, 3333
A+ EEETG2A330P (PAN)
 
500 шт Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 100V, 20% +Tol, 20% -Tol, 33uF, Surface Mount, 4141
A+ EEEFK1J330V (PAN)
 
500 шт Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 63V, 20% +Tol, 20% -Tol, 33uF, Surface Mount, 3333
A+ EEEFN1J330P (PAN)
 
500 шт V-FN, 63V, 33uF, 105°C, 2000h, 8x10.2mm, ripple 250mArms, 0.65Ohm
A+ EEEFN1J330V (PAN)
 
500 шт V-FN, Vibration proof, 63V, 33uF, 105°C, 2000h, 8x10.2mm, ripple 250mArms, 0.65Ohm
A+ EEEFK1K330V (PAN)
 
500 шт Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 80V, 20% +Tol, 20% -Tol, 33uF, Surface Mount, 3333
A+ 63SXV33M (PAN)
 
в ленте 400 шт Super High Voltage / 1000h at 125°C
A+ EEEFN1K330P (PAN)
 
500 шт V-FN, 80V, 33uF, 105°C, 2000h, 8x10.2mm, ripple 130mArms, 1.3Ohm
A+ EEEFN1K330V (PAN)
 
500 шт V-FN, Vibration proof, 80V, 33uF, 105°C, 2000h, 8x10.2mm, ripple 130mArms, 1.3Ohm
A+ EEHZA1J330P (PAN)
 
в ленте 500 шт
A+ EEHZA1J330V (PAN)
 
500 шт
A+ EEHZA1K330V (PAN)
 
500 шт
A+ EEH-ZA1J330P (PAN)
 
 
A+ EEH-ZA1J330V (PAN)
 
 
A+ EEE1JA330P (PAN)
 
500 шт Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 63V, 20% +Tol, 20% -Tol, 33uF, Surface Mount, 3333
A+ EEH-ZC1J330V (PAN)
 
 

Файлы 2

показать свернуть
Conductive Polymer Hybrid Aluminum Electrolytic Capacitors Surface Mount Type Series: ZE Type: V High temperature lead-free reflow ● ● ● ● Features Endurance: 2000 h at 145 °C (High temperature / Long life) Low ESR and high ripple current (85 % over, Lower ESR than current V-TP) High-withstand voltage ( to 63 V.DC), Low LC (0.01 CV or 3 μA) Equivalent to conductive polymer type aluminum electrolytic capacitor (There are little characteristics change by temperature and frequency) ● Vibration-proof product is available upon request. (φ8 mm and larger) ● AEC-Q200 compliant ● RoHS directive compliant Specifications Size code Category temp. range Rated voltage range Nominal cap.range Capacitance tolerance DC leakage current F G –55 ℃ to +145 ℃ 25 V.DC to 63 V.DC 33 μF to 220 μF 56 μF to 330 μF ±20 % (120 Hz / +20 ℃) I ≦ 0.01 CV or 3 (μA) After 2 minutes (whichever is greater) Dissipation factor (tan δ) Please see the attached characteristics list +145 °C ± 2 °C, 2000 h, apply the rated ripple current without exceeding the rated voltage Capacitance change Within ±30% of the initial value Endurance 1 Dissipation factor (tan δ) ≦ 200 % of the initial limit E.S.R. ≦ 200 % of the initial limit DC leakage current Within the initial limit +135 °C ± 2 °C, 4000 h, apply the rated ripple current without exceeding the rated voltage Capacitance change Within ±30% of the initial value Endurance 2 Dissipation factor (tan δ) ≦ 200 % of the initial limit E.S.R. ≦ 200 % of the initial limit DC leakage current Within the initial limit After storage for 1000 hours at +145 °C±2 °C with no voltage applied and then being Shelf life stabilized at +20 °C, capacitors shall meet the limits specified in endurance 1. (With voltage treatment) 85 °C ± 2 °C, 85 % to 90 %, 2000 h, rated voltage applied Capacitance change Within ±30% of the initial value Damp heat Dissipation factor (tan δ) ≦ 200 % of the initial limit (Load) E.S.R. ≦ 200 % of the initial limit DC leakage current Within the initial limit After reflow soldering and then being stabilized at +20 °C, capacitors shall meet the following limits. Resistance to Capacitance change Within ±10% of the initial value soldering heat Dissipation factor (tan δ) Within the initial limit DC leakage current Within the initial limit Series identification (P) H Capacitance (μF) B±0.2 220 E ZE φD±0.5 Negative polarity marking (–) A±0.2 – + L W Pressure Relief (φ10 and larger) Rated voltage mark ( )Reference size Lot number Rated voltage mark 25 E 35 V H J Unit:V.DC 50 63 (I) 0.3 max. Example : 25 V.DC 220 μF Marking color : BLACK (I) Dimensions (not to scale) K Marking Size code F G φD L A、B H I W P Unit:mm K 8.0 10.2±0.3 8.3 10.0 max. 3.4 0.90±0.2 3.1 0.70±0.2 10.0 10.2±0.3 10.3 12.0 max. 3.5 0.90±0.2 4.6 0.70±0.2 ·The dimensions of the vibration-proof products, please refer to the page of the mounting specification. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 04-Dec-18 PDF
Документация на серию ZE 

Series catalog

Дата модификации: 07.12.2018

Размер: 348.3 Кб

2 стр.

    Внимание! Точность указанного на сайте описания товара не может быть гарантирована. Для получения более полной и точной информации о товаре смотрите техническое описание (Datasheet) на сайте производителя.