Серия RS-485 и RS-422 ADM3483

UMW

Общие характеристики

 Раздел RS-485 и RS-422
Корпус SOP-8
Поддерживаемый протокол
Поддерживаемые режимы работы
Количество передатчиков
Количество приёмников
Максимальная скорость передачи данных
Нагрузочная способность (узлов)
Напряжение питания
Номинальный ток потребления
Максимальное рабочее напряжение между шиной и общим проводом
Ограничение напряжения между шиной и общим проводом
Рабочая температура

Документация на серию ADM3483

UMW R UMW ADM3485EARZ 3.3V power supply, up to 256 nodes, 12Mbps half-duplex, RS485/RS422 transceiver Features:  3.3V power supply, half-duplex;  1/8 unit load allows up to 256 devices on the bus;  Driver output short-circuit protection function;   Over temperature protection function; Low power shutdown function;  Receiver open circuit protection function;  Strong anti-noise ability;  Integrated transient voltage resistance function;  Transmission rate up to 12Mbps in an electrical noise environment; Description The ADM3485E is a 3.3V powered, half-duplex, low-power RS-485 transceiver that fully meets the requirements of the TIA/EIA-485 standard. The ADM3485E includes a driver and a receiver, both of which can be independently enabled and disabled. When both are disabled, both the driver and the receiver output a high impedance state. The ADM3485E has a 1/8 load that allows 256 ADM3485E transceivers to be connected to the same communication bus. Error-free data transfer of up to 12Mbps is possible. The ADM3485E operates from a voltage range of 3.0 to 3.6V and features fail-safe, over temperature protection, current limit protection, over-voltage protection, and other functions. Pin configuration ● R RO 1 8 VCC RE B DE A DI 4 5 GND D Figure 1 ADM3485E pin configuration www.umw-ic.com 1 友台半导体有限公司 PDF
Документация на ADM3485EARZ 

UMW ADM3485EARZ

Дата модификации: 23.10.2022

Размер: 1.42 Мб

12 стр.

UMW R ADM3485EARZ 3.3V power supply, up to 256 nodes, 12Mbps half-duplex, RS485/RS422 transceiver Features:  3.3V power supply, half-duplex;  1/8 unit load allows up to 256 devices on the bus;  Driver output short-circuit protection function;   Over temperature protection function; Low power shutdown function;  Receiver open circuit protection function;  Strong anti-noise ability;  Integrated transient voltage resistance function;  Transmission rate up to 12Mbps in an electrical noise environment; Description The ADM3485E is a 3.3V powered, half-duplex, low-power RS-485 transceiver that fully meets the requirements of the TIA/EIA-485 standard. The ADM3485E includes a driver and a receiver, both of which can be independently enabled and disabled. When both are disabled, both the driver and the receiver output a high impedance state. The ADM3485E has a 1/8 load that allows 256 ADM3485E transceivers to be connected to the same communication bus. Error-free data transfer of up to 12Mbps is possible. The ADM3485E operates from a voltage range of 3.0 to 3.6V and features fail-safe, over temperature protection, current limit protection, over-voltage protection, and other functions. Pin configuration ● R RO 1 8 VCC RE B DE A DI 4 5 GND D Figure 1 ADM3485E pin configuration www.umw-ic.com 1 友台半导体有限公司 PDF
Документация на ADM3485EARZ 

UMW ADM3485EARZ

Дата модификации: 08.10.2022

Размер: 1.48 Мб

13 стр.

    Товары серии ADM3483

    Наименование i Упаковка
    ADM3485EARZ (YOUTAI)
     
     
    		 в ленте 2500 шт