TP6002-SR

3PEAK
TP6001/TP6002/TP6004 1 MHz, 80 μA, RRIO, Op Amps Features Description  Supply Voltage: 2.1 V to 6.0 V The TP600X series are CMOS single, dual, quad opamps with RRIO, low offset, low power and stable high-frequency response. They incorporate 3PEAK’s proprietary and patented design techniques to achieve excellent AC performance with 1 MHz bandwidth, 0.7 V/μs slew rate, and low distortion whil...
развернуть ▼ свернуть ▲
 

Технические характеристики

показать свернуть
Корпус SO-8 SOIC8
Тип ОУ Маломощный операционный усилитель
Техническая особенность ОУ
Кол-во каналов ОУ
Напряжение питания
Ток собственного потребления
Rail-to-Rail выводы
Программируемый коэффициент усиления
Частота единичного усиления
Максимальная скорость нарастания выходного сигнала
Уровень шума
Диапазон рабочих температур
Нашли ошибку? Выделите её курсором и нажмите CTRL + ENTER

Аналоги 6

показать свернуть
Тип Наименование Корпус Упаковка i Тип ОУ Особенность Каналы U пит Iпотр R‑to‑R Прог. Кусил. GBW Скорость Шум T раб Примечание Карточка
товара
P= TPA1862-SR (3PEAK)
 
SO-8 SOIC8 в ленте 4000 шт —
P- MS8617 (RUIMENG)
 
SOP-8 в ленте 2500 шт Операционный усилитель с низким током питания — — —
F~ RS358AXM (RUNIC)
 
uSOP-8 MSOP8
 
 — — —
F~ TP6002-VR (3PEAK)
 
uSOP-8 MSOP8 17 шт
 
 Маломощный операционный усилитель —
F~ RS358XM (RUNIC)
 
uSOP-8 MSOP8 12 шт
 
 — — —
F~ RS358AXk (RUNIC)
 
SO-8 SOIC8 в ленте 150 шт — — —

Файлы 2

показать свернуть
TP6001/TP6002/TP6004 1 MHz, 80 μA, RRIO, Op Amps Features Description  Supply Voltage: 2.1 V to 6.0 V The TP600X series are CMOS single, dual, quad opamps with RRIO, low offset, low power and stable high-frequency response. They incorporate 3PEAK’s proprietary and patented design techniques to achieve excellent AC performance with 1 MHz bandwidth, 0.7 V/μs slew rate, and low distortion while drawing only 80 μA of quiescent current per amplifier. The common-mode input voltage range extends 100 mV beyond V− and V+, and the outputs swing rail-to-rail. The TP600X family can be used as plug-in replacements for many commercially available op-amps to reduce power and improve the input/output range and performance.  Low Supply Current: 80 μA per channel  Rail to Rail Input and Output  Bandwidth: 1 MHz  Slew Rate: 0.7 V/μs  Excellent EMI Suppress Performance  Offset Voltage: ±3 mV Maximum  Offset Voltage Temperature Drift: 2 μV/°C  Low Noise: 27 nV/√Hz at 1 kHz  High Output Capability: 100 mA  −40°C to 125°C Operation Temperature Range Applications  Active Filters, ASIC Input or Output Amplifier  Sensor Interface  Smoke/Gas/Environment Sensors  Portable Instruments and Mobile Device The combination of features makes the TP600X an ideal choice for motor control and portable audio amplification, sound ports, and other consumer Audio. The TP600X Op-amp is very stable, and it is capable of driving heavy capacitive loads such as those found in LCDs. The ability to swing rail-to-rail at the inputs and outputs enables designers to buffer CMOS DACs, ASICs, or other wide output swing devices in singlesupply systems. Typical Application Circuit www.3peakic.com.cn 1 / 19 Rev.A.0 PDF
Документация на семейство TP6001_TP6002_TP6004 

Дата модификации: 23.03.2022

Размер: 1.78 Мб

19 стр.

TP6001/TP6002/TP6004 1MHz, 80μA, RRIO, Op Amps Features Description  Supply Voltage: 2.1V to 6.0V The TP600X series are CMOS dual, and quad RRIO op-amps  Low Supply Current: 80μA per channel with low offset, low power and stable high frequency response.  Rail to Rail Input and Output  Bandwidth: 1 MHz  Slew Rate: 0.7V/μs  Excellent EMI Suppress Performance mode voltage range extends 300mV beyond V– and V+, and  Offset Voltage: ±3mV Maximum the outputs swing rail-to-rail. The TP600X family can be used as  Offset Voltage Temperature Drift: 2 μV/°C plug-in replacements for many commercially available op-amps  Low Noise: 27 nV/√Hz at 1kHz to reduce power and improve input/output range and  High Output Capability: 100mA  –40°C to 125°C Operation Temperature Range They incorporate 3PEAK’s proprietary and patented design techniques to achieve very good AC performance with 1MHz bandwidth, 0.6V/μs slew rate and low distortion while drawing only 80μA of quiescent current per amplifier. The input common- performance. The combination of features makes the TP600X ideal choices for motor control and portable audio amplification, sound ports, Applications and other consumer Audio. The TP600X Op-amp is very stable, and it is capable of driving heavy capacitive loads such as those  Active Filters, ASIC Input or Output Amplifier  Sensor Interface outputs enables designers to buffer CMOS DACs, ASICs, or  Smoke/Gas/Environment Sensors other wide output swing devices in single-supply systems.  Portable Instruments and Mobile Device found in LCDs. The ability to swing rail-to-rail at the inputs and Pin Configuration TP6001 Out 1 ﹣Vs 2 + In TP6001U 5-Pin SOT23/SC70 5-Pin SOT23/SC70 -T and -C Suffixes -T and -C Suffixes 5 3 4 ﹢Vs - In +In 1 -VS 2 -In 3 5 4 +VS Out TP6002 TP6004 8-Pin SOIC/TSSOP/MSOP 14-Pin SOIC/TSSOP -S, -T, -TS and -V Suffixes -S and -T Suffixes Out A 1 ﹣In A 2 ﹢In A 3 ﹣Vs 4 A B 8 ﹢Vs Out A 1 7 Out B ﹣In A 2 ﹢In A 3 ﹢Vs ﹢In B 6 ﹣In B 5 ﹢In B 14 Out D 13 ﹣In D 12 ﹢In D 4 11 ﹣Vs 5 10 ﹢In C A B TP6001R 5-Pin SOT23 -T Suffixes Out 1 + Vs 2 + In 3 5 - Vs 4 - In www.3peakic.com.cn 1 / 17 D C ﹣In B 6 9 ﹣In C Out B 7 8 Out C Rev.0.03 PDF
Документация на TP6001-TR 

Дата модификации: 01.02.2018

Размер: 939 Кб

17 стр.

    Внимание! Точность указанного на сайте описания товара не может быть гарантирована. Для получения более полной и точной информации о товаре смотрите техническое описание (Datasheet) на сайте производителя.

    JRC4558D (YOUTAI)