CD4051HAEN

JSCJ
JIANGSU CHANGJING ELECTRONICS TECHNOLOGY CO., LTD. 8-channel Analog Multiplexer/Demultiplexer CD4051H Logic 1 Introduction 3 Features analog • Wide supply voltage range from 3V to 18V multiplexer/demultiplexer with three address inputs (S1 to S3), an active LOW enable input (/E), eight • Fully static operation • 5V, 10V and 18V parametric ratings independent inputs/outputs (Y0 to Y...
развернуть ▼ свернуть ▲
 

Технические характеристики

показать свернуть
корпус —
Нашли ошибку? Выделите её курсором и нажмите CTRL + ENTER

Файлы 1

показать свернуть
JIANGSU CHANGJING ELECTRONICS TECHNOLOGY CO., LTD. 8-channel Analog Multiplexer/Demultiplexer CD4051H Logic 1 Introduction 3 Features analog • Wide supply voltage range from 3V to 18V multiplexer/demultiplexer with three address inputs (S1 to S3), an active LOW enable input (/E), eight • Fully static operation • 5V, 10V and 18V parametric ratings independent inputs/outputs (Y0 to Y7) and a common • Standardized symmetrical output characteristics input/output (Z). The device contains eight bidirectional analog switches, each with one side connected to an • Specified from -40°C to +125°C The CD4051H is an 8-channel independent input/output (Y0 to Y7) and the other side connected to a common input/output (Z). With /E LOW, 4 Applications one of the eight switches is selected (low-impedance ON-state) by S1 to S3. With /E HIGH, all switches are • Analog and digital multiplexing and demultiplexing • Analog to digital and digital to analog conversion in the high-impedance OFF-state, independent of S1 to • Signal gating S3. If break before make is needed, then it is necessary to use the enable input. • Factory automation • Televisions VDD and VSS are the supply voltage connections for the digital control inputs (S1 to S3, and /E). The VDD to VSS • Appliances • Consumer audio range is 3V to 18V. The analog inputs/outputs (Y0 to Y7, and Z) can swing between VDD as a positive limit and • Programmable logic circuits • Sensors VEE as a negative limit. VDD-VEE may not exceed 18V. Unused inputs must be connected to VDD, VSS, or another input. For operation as a digital E multiplexer/demultiplexer, VEE is connected to VSS (typically ground). VEE and VSS are the supply voltage S3 S2 S1 S3 S2 S1 0 0 0 0 0 1 0 1 0 0 1 1 connections for the switches. Z 1 0 0 2 Available Packages 1 0 1 PART NUMBER Ch Y1 Ch Y2 Ch Y3 Ch Y4 Ch Y5 1 1 0 PACKAGE 1 1 1 SOP16 CD4051H Ch Y0 Ch Y6 Ch Y7 TSSOP16 CD4051H QFN3.5x2.5-16L Functional diagrams Note: For all available packages, please refer to the part Orderable Information. www.jscj-elec.com 1 Rev. – 1.2 PDF
Документация на серию CD4051 

CD4051H The data sheet of IC

Дата модификации: 23.07.2025

Размер: 642.1 Кб

19 стр.

    Внимание! Точность указанного на сайте описания товара не может быть гарантирована. Для получения более полной и точной информации о товаре смотрите техническое описание (Datasheet) на сайте производителя.

    MS2244 (RUIMENG)