IB2415LS-1WR3

DC/DC Converter IB_LS-1WR3 Series FEATURES 1W isolated DC-DC converter Fixed input voltage, regulated single output  Continuous short-circuit protection  No-load input current as low as 8mA  Operating ambient temperature range: -40℃ to +85℃  High efficiency up to 75%  I/O isolation test voltage 1.5k VDC  Industry standard pin-out CB Report RoHS Patent Protection UL 62368-1 EN 62368-1...
развернуть ▼ свернуть ▲
 

Технические характеристики

показать свернуть
Монтаж
Выходная мощность
Количество каналов
Входное напряжение
Параметры выходов
Возможности
Комплекс защит
Номинальное входное напряжение
Напряжение 1 выхода
Ток 1 выхода
КПД
Напряжение изоляции вход-выход
Размер 19.65×6×10.16 мм
Рабочая температура
Нашли ошибку? Выделите её курсором и нажмите CTRL + ENTER

Аналоги 38

показать свернуть
Тип Наименование Корпус Упаковка i Монтаж P вых Каналов U вх Выход Возможности Защита U вх ном. U1 U2 U3 I1 I2 I3 Шум КПД Паралл. сх. Uиз. вх-вых Uиз. вх-общ Uиз. вых-общ Uиз. вых-вых Серт. медиц. T раб Примечания Карточка
товара
A- B2415LS-1WR3 (MORNSUN)
 
1 шт
A- G2415S-1WR2 (MORNSUN)
 
SIP76
A- WRB2415SD-1WR2 (MORNSUN)
 
 
A- UWE1215S-1WR3 (MORNSUN)
 
SIP7
A- UWF1215S-1WR3 (MORNSUN)
 
A- H2415S-1WR3 (MORNSUN)
 
 
Suitable for medical application
A- H2415WS-1WR3 (MORNSUN)
 
Suitable for medical application
A- B2415D-1WR3 (MORNSUN)
 
A- WRB2415S-1WR2 (MORNSUN)
 
SIP87 стандарт, функция Remote On/Off, изолированный
A- A2415D-1WR3 (MORNSUN)
 
A- D241515S-1WR3 (MORNSUN)
 
 
A- B2415S-1WR2 (MORNSUN)
 
SIP4 1 шт
A- WRE2415S-1WR2 (MORNSUN)
 
SIP87 в линейках 30 шт стандарт, функция Remote On/Off, изолированный
A- F2415N-1WR3 (MORNSUN)
 
A- WRF2415S-1WR2 (MORNSUN)
 
SIP87 стандарт, функция Remote On/Off, изолированный
A- E2415D-1WR3 (MORNSUN)
 
 
A- E2415S-1WR2 (MORNSUN)
 
SIP76 в линейках 18 шт
A- E2415S-1WR3 (MORNSUN)
 
в линейках 20 шт
A- WRA2415S-1WR2 (MORNSUN)
 
SIP87 в линейках 50 шт стандарт, функция Remote On/Off, изолированный
A- WRA2415SD-1WR2 (MORNSUN)
 
 
A- SBTN01N-15 (MW)
 
SMD8 в линейках 38 шт
A- DPRN01N-15 (MW)
 
 
A- B2415S-1WR3 (MORNSUN)
 
в линейках 1000 шт
A- F2415S-1WR3 (MORNSUN)
 
в линейках 50 шт
A- F2415XT-1WR3 (MORNSUN)
 
в линейках 38 шт
A- H2415S-1WR2 (MORNSUN)
 
SIP76 в линейках 14 шт
A- A2415S-1WR3 (MORNSUN)
 
в линейках 70 шт
A- SBTN01N-15N (MW)
 
SMD8
 
A- SPU01N-15 (MW)
 
KBP
A- DETN01N-15 (MW)
 
A- DETN01N-15N (MW)
 
 
A- SMA01N-15 (MW)
 
DIP-8
A- SMT01B-15 (MW)
 
 
короткого замыкания, перегрузки
A- SMU01N-15 (MW)
 
SIP4 1 шт
A- SPA01B-15 (MW)
 
SIP65 в линейках 25 шт
A- SFTN01N-15N (MW)
 
 
A- SPRN01N-15 (MW)
 
SIP7 11 шт
 
A- DPU01N-15 (MW)
 
1 шт

Файлы 3

показать свернуть
DC/DC Converter IB_LS-1WR3 Series FEATURES 1W isolated DC-DC converter Fixed input voltage, regulated single output  Continuous short-circuit protection  No-load input current as low as 8mA  Operating ambient temperature range: -40℃ to +85℃  High efficiency up to 75%  I/O isolation test voltage 1.5k VDC  Industry standard pin-out CB Report RoHS Patent Protection UL 62368-1 EN 62368-1 BS EN 62368-1 IEC 62368-1 IB_LS-1WR3 series is especially designed for distributed power supply systems where an isolated voltage is required. They are suitable for occasions of: pre-interference isolation, ground interference elimination, pure digital circuit, voltage isolation conversion, general low frequency analog circuit, relay drive circuit, etc. Selection Guide Output Input Voltage (VDC) Certification Part No. UL/EN/BS EN/IEC IB1205LS-1WR3 EN/BS EN IB1209LS-1WR3 UL/EN/BS EN/IEC IB1212LS-1WR3 Nominal (Range) 12 (11.4-12.6) IB1215LS-1WR3 IB1505LS-1WR3 IB1515LS-1WR3 15 (14.25-15.75) IB2403LS-1WR3 EN/BS EN IB2405LS-1WR3 IB2409LS-1WR3 IB2412LS-1WR3 24 (22.8-25.2) IB2415LS-1WR3 Voltage (VDC) Current (mA) Max./Min. Full Load Efficiency (%) Min./Typ. Capacitive Load (µF) Max. 5 200/20 69/73 2400 9 111/12 69/73 1000 12 83/9 69/73 560 15 67/7 71/75 560 5 200/20 69/73 2400 15 67/7 71/75 560 3.3 250/25 65/71 2400 5 200/20 67/73 2400 9 111/12 67/73 1000 12 83/9 67/73 560 15 67/7 67/73 560 Input Specifications Item Operating Conditions 12V input Input Current (full load / no-load) 15V input 24V input Min. Typ. Max. 5VDC/9VDC/12VDC output -- 115/8 121/-- 15VDC output -- 112/8 118/-- 5VDC output -- 92/8 97/-- 15VDC output -- 89/8 94/-- 3.3VDC output -- 59/8 65/-- 5VDC/9VDC/12VDC/15VDC output -- 58/8 63/-- 15 -- Reflected Ripple Current* -- Input Filter Unit mA Capacitor Filter Hot Plug Unavailable Note: * Refer to DC-DC Converter Application Notes for detailed description of reflected ripple current test method. Output Specifications Item Operating Conditions Voltage Accuracy Linear Regulation Input voltage change: ±1% Min. Typ. Max. -- -- ±3 -- -- ±0.25 2022.01.14-A/2 Unit % Page 1 of 4 MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final interpretation PDF
Документация на IB2415LS-1WR3 

IB_LS-1WR3 Keywords:

Дата модификации: 14.01.2022

Размер: 1.54 Мб

4 стр.

DC/DC Converter IB_LS-1WR3 Series FEATURES 1W isolated DC-DC converter Fixed input voltage and regulated single output  Continuous short-circuit protection  No-load input current as low as 8mA  Operating ambient temperature range: -40℃ to +85℃  High efficiency up to 75% CB  I/O isolation test voltage 1.5k VDC  Industry standard pin-out Patent Protection RoHS UL 62368-1 EN 62368-1 IEC62368-1 IB_LS-1WR3 series is especially designed for distributed power supply systems where an isolated voltage is required. They are suitable for occasions of: pre-interference isolation, ground interference elimination, pure digital circuit, voltage isolation conversion, general low frequency analog circuit, relay drive circuit, etc. Selection Guide Input Voltage (VDC) Certification Part No. UL/EN/IEC IB1205LS-1WR3 EN IB1209LS-1WR3 UL/EN/IEC IB1212LS-1WR3 UL/EN/IEC IB1215LS-1WR3 EN IB1505LS-1WR3 EN IB1515LS-1WR3 EN IB2403LS-1WR3 EN IB2405LS-1WR3 EN IB2409LS-1WR3 EN IB2412LS-1WR3 EN IB2415LS-1WR3 Output Nominal (Range) 12 (11.4-12.6) 15 (14.25-15.75) 24 (22.8-25.2) Voltage (VDC) Current (mA) Max./Min. Full Load Efficiency (%) Min./Typ. Capacitive Load (µF) Max. 5 200/20 69/73 2400 9 111/12 69/73 1000 12 83/9 69/73 560 15 67/7 71/75 560 5 200/20 69/73 2400 15 67/7 71/75 560 3.3 250/25 65/71 2400 5 200/20 67/73 2400 9 111/12 67/73 1000 12 83/9 67/73 560 15 67/7 67/73 560 Input Specifications Item Operating Conditions 12V input Input Current (full load / no-load) 15V input 24V input Min. Typ. Max. 5VDC/9VDC/12VDC output -- 115/8 121/-- 15VDC output -- 112/8 118/-- 5VDC output -- 92/8 97/-- 15VDC output -- 89/8 94/-- 3.3VDC output -- 59/8 65/-- 5VDC/9VDC/12VDC/15VDC output -- 58/8 63/-- -- 15 -- Reflected Ripple Current* Input Filter Unit mA Capacitance Filter Hot Plug Unavailable Note: * Refer to DC-DC Converter Application Notes for detailed description of reflected ripple current test method. Output Specifications Item Operating Conditions Min. Typ. -- -- ±3 -- -- ±0.25 3.3VDC output -- -- ±3 5VDC/9VDC/12VDC/15VDC output -- -- ±2 Voltage Accuracy Linear Regulation Load Regulation Input voltage change: ±1% 10%-100% load 2021.09.18-A/1 Max. Unit % Page 1 of 4 MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final interpretation PDF
Документация на IB2415LS-1WR3 

IB_LS-1WR3 Keywords:

Дата модификации: 18.09.2021

Размер: 1.56 Мб

4 стр.

DC/DC Converter IB_LS-1WR3 Series FEATURES 1W isolated DC-DC converter Fixed input voltage and regulated single output  Continuous short-circuit protection  No-load input current as low as 8mA  Operating ambient temperature range: -40℃ to +85℃  High efficiency up to 75%  I/O isolation test voltage 1.5k VDC  Industry standard pin-out Patent Protection RoHS IB_LS-1WR3 series is especially designed for distributed power supply systems where an isolated voltage is required. They are suitable for occasions of: pre-interference isolation, ground interference elimination, pure digital circuit, voltage isolation conversion, general low frequency analog circuit, relay drive circuit, etc. Selection Guide Input Voltage (VDC) Certification Part No. Output Nominal (Range) Voltage (VDC) Current (mA) Max./Min. Full Load Efficiency (%) Min./Typ. Capacitive Load (µF) Max. 5 200/20 69/73 2400 IB1205LS-1WR3 IB1209LS-1WR3 IB1212LS-1WR3 12 (11.4-12.6) IB1215LS-1WR3 IB1505LS-1WR3 -- IB1515LS-1WR3 15 (14.25-15.75) IB2403LS-1WR3 IB2405LS-1WR3 IB2409LS-1WR3 IB2412LS-1WR3 24 (22.8-25.2) IB2415LS-1WR3 9 111/12 69/73 1000 12 83/9 69/73 560 15 67/7 71/75 560 5 200/20 69/73 2400 15 67/7 71/75 560 3.3 250/25 65/71 2400 5 200/20 67/73 2400 9 111/12 67/73 1000 12 83/9 67/73 560 15 67/7 67/73 560 Input Specifications Item Operating Conditions 12V input Input Current (full load / no-load) 15V input 24V input Min. Typ. Max. 5VDC/9VDC/12VDC output -- 115/8 121/-- 15VDC output -- 112/8 118/-- 5VDC output -- 92/8 97/-- 15VDC output -- 89/8 94/-- 3.3VDC output -- 59/8 65/-- 5VDC/9VDC/12VDC/15VDC output -- 58/8 63/-- -- 30 -- Reflected Ripple Current* Input Filter Unit mA Capacitance Filter Hot Plug Unavailable Note: * Refer to DC-DC Converter Application Notes for detailed description of reflected ripple current test method. Output Specifications Item Operating Conditions Voltage Accuracy Linear Regulation Load Regulation Input voltage change: ±1% 10%-100% load Min. Typ. Max. -- -- ±3 -- -- ±0.25 3.3VDC output -- -- ±3 5VDC/9VDC/12VDC/15VDC output -- -- ±2 2020.10.30-A/0 Unit % Page 1 of 4 MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final interpretation PDF
Документация на серию IB_LS-1WR3 

IB_LS-1WR3 Keywords:

Дата модификации: 05.11.2020

Размер: 44.4 Кб

4 стр.

    Внимание! Точность указанного на сайте описания товара не может быть гарантирована. Для получения более полной и точной информации о товаре смотрите техническое описание (Datasheet) на сайте производителя.