URB1D24YMD-6WHR3A2S

Mornsun
DC/DC Converter URA1D_YMD-6WR3 & URB1D_YMD-6WR3 Series FEATURES 6W isolated DC-DC converter Ultra-wide input voltage and regulated dual/single output        RoHS    Patent Protection Ultra-wide 4:1 input voltage range High efficiency up to 86% I/O isolation test voltage: 2.25k VDC Operating ambient temperature range: -40℃ to +85℃ Input under-voltage protection, output short...
развернуть ▼ свернуть ▲

Технические характеристики

показать свернуть
Монтаж
Выходная мощность
Количество каналов
Входное напряжение
Параметры выходов
Возможности
  Комплекс защит: от пониженного входного напряжения, обратного входного напряжения, КЗ, перегрузки, перенапряжения
Номинальное входное напряжение
Напряжение 1 выхода
Ток 1 выхода
Уровень пульсаций
КПД
Напряжение изоляции вход-выход
Напряжение изоляции вход-земля
Напряжение изоляции выход-земля
Размер 76×31.5×25.2 мм
Рабочая температура
Нашли ошибку? Выделите её курсором и нажмите CTRL + ENTER

Аналоги 14

показать свернуть
Тип Наименование Корпус Упаковка i Монтаж P вых Каналов U вх Выход Возможности Защита U вх ном. U1 U2 U3 I1 I2 I3 Шум КПД Паралл. сх. Uиз. вх-вых Uиз. вх-общ Uиз. вых-общ Uиз. вых-вых Серт. медиц. T раб Примечания Карточка
товара
A- URF2424P-6WR3 (MORNSUN)
 
DIP2410 1 шт
A- URB2424S-10WR3 (MORNSUN)
 
SIP87 в линейках 44 шт
 
A- URB2424S-6WR3 (MORNSUN)
 
SIP87 10 шт
A- URB2424YMD-10WR3 (MORNSUN)
 
в линейках 12 шт
A- URB2424ZP-6WR3 (MORNSUN)
 
DIP-24 в линейках 30 шт
A- DUF6-2424P (SHINET)
 
DIP-24
 
КЗ, перегрузки, перенапряжения, от пониженного входного напряжения
A- SPB09B-24 (MW)
 
в линейках 5 шт
 
A- SPB09C-24 (MW)
 
SIP8
 
A- SKE10B-24 (MW)
 
2X1INCH в линейках 10 шт
A- PSD-05-24 (MW)
 
в коробках 20 шт DC-DC модульный преобразователь - Монтаж: открытый; P вых: 5 Вт; #: 1; U вх: 36...72 В;... КЗ, перегрузка, перенапряжение, перегрев
A- VRB2424S-6WR3 (MORNSUN)
 
SIP87 в линейках 5 шт
A- DKE10C-24 (MW)
 
2X1INCH в линейках 10 шт DC-DC модульный преобразователь - Монтаж: на плату, 2x1 inch; P вых: 10 Вт; #: 2; U вх:...
A- VRB2424YMD-10WR3 (MORNSUN)
 
1 шт
 
A- VRB2424ZP-10WR3 (MORNSUN)
 
в линейках 4 шт

Файлы 1

показать свернуть
DC/DC Converter URA1D_YMD-6WR3 & URB1D_YMD-6WR3 Series FEATURES 6W isolated DC-DC converter Ultra-wide input voltage and regulated dual/single output        RoHS    Patent Protection Ultra-wide 4:1 input voltage range High efficiency up to 86% I/O isolation test voltage: 2.25k VDC Operating ambient temperature range: -40℃ to +85℃ Input under-voltage protection, output shortcircuit, over-current, over-voltage protection Low ripple & noise Input reverse polarity protection available with chassis(A2S ) or Din-Rail mounting (A4S) version EN62368 approved Meets EN50155 railway standard Industry standard pin-out URA1D_YMD-6WR3 & URB1D_YMD-6WR3 series of isolated 6W DC-DC converter with 40-160VDC input voltage with efficiencies of up to 86%, input to output isolation is tested with 2250VDC and the converter safely operate ambient temperature of -40℃ to +85℃, input under-voltage protection, output short-circuit, over-current, over-voltage protection. They are widely used in railway vehicle applications using 72V, 96V and 110V battery voltages. Selection Guide CE Input Voltage (VDC) ② Nominal ③ Max. (Range) Output Voltage (VDC) Current (mA) Max./Min. Full Load Efficiency④ (%) Min./Typ. Capacitive Load (µF)Max. URA1D05YMD-6WR3 ±5 ±600/0 78/80 470 URA1D12YMD-6WR3 ±12 ±250/0 82/84 100 URA1D15YMD-6WR3 ±15 ±200/0 83/85 100 5 1200/0 78/80 1000 Part No. ① Certification URB1D05YMD-6WR3 110 (40-160) 170 12 500/0 82/84 470 URB1D15YMD-6WR3 15 400/0 83/85 220 URB1D24YMD-6WR3 24 250/0 84/86 100 URB1D12YMD-6WR3 Note: ①Use “H” suffix for heat sink mounting, “A2S” suffix for chassis mounting and “A4S” suffix for Din-Rail mounting. We recommend to choose modules with a heat sink for enhanced heat dissipation and applications with extreme temperature requirements; ②The minimum input voltage and starting voltage of A2S and A4S Model are 1VDC higher than those of DIP package due to input reverse polarity protection function; ③Exceeding the maximum input voltage may cause permanent damage; ④Efficiency is measure at nominal input voltage and rated output load; efficiencies for A2S and A4S Model’s is decreased by 2% due to the input reverse polarity protection circuit. Input Specifications Item Min. Typ. Max. Input Current (full load / no-load) Nominal input voltage Operating Conditions -- 68/3 70/8 Reflected Ripple Current -- 25 -- Nominal input voltage Surge Voltage (1sec. max.) -0.7 -- 180 Start-up Voltage -- -- 40 Input Under-voltage Protection 28 33 -- -- 10 Start-up Time Nominal input voltage & constant resistance load Input Filter mA VDC ms Pi filter Hot Plug Ctrl* -- Unit Unavailable Module on Ctrl pin open or pulled high (3.5-12VDC) Module off Ctrl pin pulled low to GND (0-1.2VDC) Input current when off -- 3 8 mA Note: *The Ctrl pin voltage is referenced to input GND. 2021.02.08-A/8 Page 1 of 8 MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final interpretation PDF
Документация на URB1D24YMD-6WHR3A4S 

URA1D_YMD-6WR3 & URB1D_YMD-6WR3 Keywords:

Дата модификации: 22.02.2021

Размер: 2.86 Мб

8 стр.

    Внимание! Точность указанного на сайте описания товара не может быть гарантирована. Для получения более полной и точной информации о товаре смотрите техническое описание (Datasheet) на сайте производителя.