HLP-60H-54

MEAN WELL
Источник питания AC-DC (для LED) открытый, выходная мощность 60 Вт, выходной ток 1.15 А, выходное напряжение 54 В, входное напряжение 90-305 В (перем.), диапазон температуры -40...+70С, ККМ
развернуть ▼ свернуть ▲
Фотография серии HLP-60H
Чертёж серии HLP-60H
 
 

Технические характеристики

показать свернуть
Тип преобразователя
Мощность выходная
Диапазон выходных напряжений
Диапазон выходных токов
Напряжение сети/входное номинальное
Режим стабилизации
Тип диммирования ШИМ, 0/1-10 В, потенциометр внешний
Исполнение конструктивное
Степень защиты (IP)
Подстройка выходных параметров
Диапазон входных напряжений (AC)
Диапазон входных напряжений (DC)
Напряжение изоляции вход-выход
Количество выходов
Коэффициент мощности
Эффективность
Функция защиты КЗ, перегрузка, перенапряжение, перегрев
Температура рабочая
Размер 147×53×27 мм
Применение
Особенности
Нашли ошибку? Выделите её курсором и нажмите CTRL + ENTER

Файлы 2

показать свернуть
HLP-60H 60W Single Output Switching Power Supply ■ Features : Universal AC input / Full range (up to 305VAC) Built-in active PFC function Protections: Short circuit / Over current / Over voltage / Over temperature Cooling by free air convection Output constant current level adjustable Class 2 power unit Three in one dimming function (1~10Vdc or PWM signal or resistance) Suitable for built in LED lighting system Suitable for dry / damp locations 100% full load burn-in test 3 years warranty M M MODEL DC VOLTAGE HLP-60H-20 HLP-60H-24 HLP-60H-30 HLP-60H-36 HLP-60H-42 HLP-60H-48 HLP-60H-54 20V 24V 30V 36V 42V 48V 54V 12 ~ 20V 14.4 ~ 24V 25.2 ~ 42V 28.8 ~ 48V 32.4 ~ 54V 4A 3A 2.5A 18 ~ 30V 2A 21.6 ~ 36V RATED CURRENT 1.7A 1.45A 1.3A 1.15A RATED POWER 60W 60W 60W 60W 61.2W 60.9W 62.4W 62.1W 150mVp-p 150mVp-p 200mVp-p 200mVp-p 300mVp-p 300mVp-p 300mVp-p 17 ~ 22V 22 ~ 27V 27 ~ 33V 33 ~ 40V 40 ~ 46V 44 ~ 53V 49 ~ 58V 13.5 ~ 17V VOLTAGE ADJ. RANGE Can be adjusted by internal potentiometer CURRENT ADJ. RANGE 1.8 ~ 3A 1.5 ~ 2.5A 1.2 ~ 2A 1 ~ 1.7A 0.87 ~ 1.45A 0.78 ~ 1.3A 0.69 ~ 1.15A VOLTAGE TOLERANCE Note.3 ±2.0% ±1.0% ±1.0% ±1.0% ±1.0% ±1.0% ±1.0% ±1.0% LINE REGULATION ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% LOAD REGULATION ±1.5% ±1.0% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% SETUP, RISE TIME 2.4 ~ 4A Note.6 500ms, 80ms at full load 16ms/230VAC HOLD UP TIME (Typ.) VOLTAGE RANGE Note.5 90 ~ 305VAC 47 ~ 63Hz PF>0.98/115VAC, PF>0.95/230VAC, PF>0.92/277VAC at full load (Please refer to "Power Factor Characteristic" curve) TOTAL HARMONIC DISTORTION EFFICIENCY (Typ.) THD< 20% when output loading≧60% at 115VAC/230VAC input and output loading≧75% at 277VAC input 89% 90% 90% 90.5% 88% 90% 89.5% AC CURRENT (Typ.) INRUSH CURRENT (Typ.) 0.64A / 115VAC 0.32A / 230VAC 0.3A / 277VAC COLD START 55A(twidth=265μs measured at 50% Ipeak) at 230VAC MAX. No. of PSUs on 16A CIRCUIT BREAKER 9 units (circuit breaker of type B) / 16 units (circuit breaker of type C) at 230VAC Note.4 OVER VOLTAGE 95 ~ 108% Protection type : Constant current limiting, recovers automatically after fault condition is removed Hiccup mode, recovers automatically after fault condition is removed 48 ~ 58V 35 ~ 43V 18 ~ 24V 28 ~ 35V 41 ~ 49V 23 ~ 30V Shut down o/p voltage, re-power on to recover WORKING TEMP. -40 ~ +70℃ (Refer to "Derating Curve") VIBRATION SAFETY STANDARDS SAFETY & WITHSTAND VOLTAGE 54 ~ 65V 59 ~ 68V Protection type : Shut down o/p voltage, re-power on to recover OVER TEMPERATURE WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT NOTE 90.5% <0.75mA / 277VAC SHORT CIRCUIT OTHERS 16ms/115VAC at full load 127 ~ 431VDC POWER FACTOR (Typ.) OVER CURRENT EMC 230VAC / 115VAC FREQUENCY RANGE LEAKAGE CURRENT PROTECTION www. tuv.com ID 2000000000 15V RIPPLE & NOISE (max.) Note.2 150mVp-p INPUT ( for 48V,54V only) ( except for 48V,54V ) HLP-60H-15 CONSTANT CURRENT REGION Note.4 9 ~ 15V OUTPUT User’s Manual Bauar t gepruft Sicherheit egel ma ge od o s be wac g SELV SPECIFICATION series 20 ~ 95% RH non-condensing -40 ~ +80℃, 10 ~ 95% RH ±0.03%/℃ (0 ~ 50℃) 10 ~ 500Hz, 2G 12min./1cycle, period for 72min. each along X, Y, Z axes UL8750, CSA C22.2 No. 250.0-08 (except for 48V, 54V), BS EN/EN61347-1, BS EN/EN61347-2-13, GB19510.14 , GB19510.1, EAC TP TC 004 approved ; design refer to UL60950-1, BS EN/EN60335-1 I/P-O/P:3.75KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25℃/ 70% RH Compliance to BS EN/EN55015, GB17743, GB17625.1, BS EN/EN61000-3-2 Class C (≧60% load) ; BS EN/EN61000-3-3, EMC EMISSION EAC TP TC 020 Compliance to BS EN/EN61000-4-2,3,4,5,6,8,11; BS EN/EN61547, BS EN/EN55024, light industry level (surge 4KV), criteria A, EMC IMMUNITY EAC TP TC 020 MTBF 288.5Khrs min. MIL-HDBK-217F (25℃) 147*53*27mm (L*W*H) DIMENSION 0.2Kg;72pcs/15.4Kg/1.01CUFT PACKING 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature. ISOLATION RESISTANCE 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. Please refer to "DRIVING METHODS OF LED MODULE". 5. Derating may be needed under low input voltages. Please check the static characteristics for more details. 6. Length of set up time is measured at cold first start. Turning ON/OFF the power supply may lead to increase of the set up time. 7. The power supply is considered a component which will be installed into a final equipment. All the EMC tests are been executed by mounting the unit on a 360mm*360mm metal plate with 1mm of thickness. The final equipment must be re-confirmed that it still meets EMC directives. For guidance on how to perform these EMC tests, please refer to “EMI testing of component power supplies.” (as available on http://www.meanwell.com) 8. Direct connecting to LEDs is suggested, but is not suitable for using additional drivers. 9. To fulfill requirements of the latest ErP regulation for lighting fixtures, this LED power supply can only be used behind a switch without permanently connected to the mains. ※ Product Liability Disclaimer：For detailed information, please refer to https://www.meanwell.com/serviceDisclaimer.aspx File Name:HLP-60H-SPEC 2021-09-03 PDF
Документация на HLP-60H-54 

HLP-60H.cdr

Дата модификации: 02.09.2021

Размер: 114.3 Кб

4 стр.

HLP-60H 60W Single Output Switching Power Supply series Features : Universal AC input / Full range (up to 305VAC) Built-in active PFC function, PF>0.95 Protections: Short circuit / Over current / Over voltage / Over temperature Cooling by free air convection Output constant current level adjustable 100% full load burn-in test Three in one dimming function (1~10Vdc or PWM signal or resistance) Suitable for built in LED lighting system Suitable for dry / damp locations 3 years warranty M M SELV ( for 48V,54V only) SPECIFICATION MODEL DC VOLTAGE HLP-60H-15 HLP-60H-20 HLP-60H-24 HLP-60H-30 HLP-60H-36 HLP-60H-42 HLP-60H-48 HLP-60H-54 15V 20V 24V 30V 36V 42V 48V 54V 12 ~ 20V 14.4 ~ 24V 25.2 ~ 42V 28.8 ~ 48V 32.4 ~ 54V 4A 3A 2.5A 18 ~ 30V 2A 21.6 ~ 36V RATED CURRENT 1.7A 1.45A 1.3A 1.15A RATED POWER 60W 60W 60W 60W 61.2W 60.9W 62.4W 62.1W 150mVp-p 150mVp-p 200mVp-p 200mVp-p 300mVp-p 300mVp-p 300mVp-p 17 ~ 22V 22 ~ 27V 27 ~ 33V 33 ~ 40V 40 ~ 46V 44 ~ 53V 49 ~ 58V 0.87 ~ 1.45A 0.78 ~ 1.3A 0.69 ~ 1.15A CONSTANT CURRENT REGION Note.4 9 ~ 15V RIPPLE & NOISE (max.) Note.2 150mVp-p OUTPUT VOLTAGE ADJ. RANGE 13.5 ~ 17V CURRENT ADJ. RANGE Can be adjusted by internal potentiometer or through output connector 1 ~ 1.7A 2.4 ~ 4A 1.8 ~ 3A 1.5 ~ 2.5A 1.2 ~ 2A VOLTAGE TOLERANCE Note.3 2.0% 1.0% 1.0% 1.0% 1.0% 1.0% 1.0% 1.0% LINE REGULATION 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% LOAD REGULATION 1.5% 1.0% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% SETUP, RISE TIME Note.6 1500ms, 80ms / 115VAC at full load 16ms/230VAC HOLD UP TIME (Typ.) VOLTAGE RANGE INPUT Note.5 90 ~ 305VAC 1000ms, 80ms / 230VAC at full load 16ms/115VAC at full load 127 ~ 431VDC FREQUENCY RANGE 47 ~ 63Hz POWER FACTOR (Typ.) PF>0.97/115VAC, PF>0.95/230VAC, PF>0.92/277VAC at full load (Please refer to "Power Factor Characteristic" curve) EFFICIENCY (Typ.) 89% 88% 89.5% 0.64A / 115VAC 0.32A / 230VAC COLD START 70A/230VAC AC CURRENT (Typ.) INRUSH CURRENT (Typ.) OVER CURRENT 90% 90% Note.4 PROTECTION OVER VOLTAGE Protection type : Constant current limiting, recovers automatically after fault condition is removed 48 ~ 58V 35 ~ 43V 18 ~ 24V 28 ~ 35V 41 ~ 49V 23 ~ 30V WORKING TEMP. -40 ~ +70 WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION SAFETY STANDARDS -40 ~ +80 0.03%/ , 10 ~ 95% RH (0 ~ 50 ) 10 ~ 500Hz, 2G 12min./1cycle, period for 72min. each along X, Y, Z axes UL8750, CSA C22.2 No. 250.0-08 (except for 48V, 54V), EN61347-1, EN61347-2-13 approved ; Design refer to UL60950-1, TUV EN60950-1, EN60335-1 EMC I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25 / 70% RH Compliance to EN55015, EN61000-3-2 Class C ( 60% load) ; EN61000-3-3 NOTE 59 ~ 68V (Refer to "Derating Curve") I/P-O/P:3.75KVAC ISOLATION RESISTANCE PACKING 54 ~ 63V 20 ~ 95% RH non-condensing SAFETY & WITHSTAND VOLTAGE DIMENSION 90.5% Protection type : Shut down o/p voltage, re-power on to recover 85 10 (RTH2) Protection type : Shut down o/p voltage, re-power on to recover EMC IMMUNITY MTBF 90.5% 95 ~ 108% OVER TEMPERATURE EMC EMISSION 90% 0.3A / 277VAC <0.75mA / 277VAC LEAKAGE CURRENT OTHERS ( except for 48V,54V ) I/P-FG:1.88KVAC O/P-FG:0.5KVAC Compliance to EN61000-4-2,3,4,5,6,8,11; EN61547, EN55024, light industry level (surge 4KV), criteria A 288.5Khrs min. MIL-HDBK-217F (25 ) 147*53*27mm (L*W*H) 0.2Kg;72pcs/15.4Kg/1.09CUFT 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. Constant current operation region is within 60% ~100% rated output voltage. This is the suitable operation region for LED related applications, but please reconfirm special electrical requirements for some specific system design. 5. Derating may be needed under low input voltages. Please check the static characteristics for more details. 6. Length of set up time is measured at cold first start. Turning ON/OFF the power supply may lead to increase of the set up time. 7. The power supply is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected by the complete installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again. File Name:HLP-60H-SPEC 2011-12-19 PDF
Документация на серию HLP-60H 

HLP-60H.cdr

Дата модификации: 21.12.2011

Размер: 335.9 Кб

4 стр.

    Внимание! Точность указанного на сайте описания товара не может быть гарантирована. Для получения более полной и точной информации о товаре смотрите техническое описание (Datasheet) на сайте производителя.

    APC-12-350 (MW)