LPC-100-1400

AC-DC преобразователь (LED драйвер; стабилизация тока); мощность 100 Вт Технические характеристики: Выходная мощность, ном., Вт: 100 Выходной ток, мА: 1400 Выходное напряжение, В AC: 36...72 Входное напряжение, В: 90...264 Класс исполнения IP67 Размер, мм 190×52×37 Диапазон рабочей температуры, С: -25 … 50
развернуть ▼ свернуть ▲

Технические характеристики

показать свернуть
Тип преобразователя
Мощность выходная
Диапазон выходных напряжений
Диапазон выходных токов
Напряжение сети/входное номинальное
Режим стабилизации
Тип диммирования
Исполнение конструктивное
Степень защиты (IP)
Подстройка выходных параметров
Диапазон входных напряжений (AC)
Диапазон входных напряжений (DC)
Напряжение изоляции вход-выход
Количество выходов
Эффективность
Функция защиты
Температура рабочая
Размер 190×52×37 мм
Применение для промышленного и наружного освещения
Особенности
Нашли ошибку? Выделите её курсором и нажмите CTRL + ENTER

Файлы 2

показать свернуть
LPC-100 100W Single Output LED Power Supply series ■ Features :  Constant current design  Universal AC input/full rauge  Withstand 300VAC surge input for 5 seconds  High efficiency up to 90%  Protections: Short circuit / Over voltage  Cooling by free air convection  Fully encapsulated with IP67 level (Note.6)  Fully isolated plastic case  ClassⅡ power unit, no FG  Suitable for LED lighting and moving sign applications( Note. 7)  100% full load burn- in test  Low cost, high reliability  2 years warranty (Note.4) IP67 SPECIFICATION LPC-100-350 LPC-100-500 LPC-100-700 LPC-100-1050 LPC-100-1400 LPC-100-1750 LPC-100-2100 RATED CURRENT 350mA 500mA 700mA 1050mA 1400mA 1750mA 2100mA CURRENT ACCURACY ±5.0% 100 ~ 200V 72 ~ 143V 48 ~ 96V 36 ~ 72V 29 ~ 58V 24 ~ 48V 100W 100.1W 100.8W 100.8W 101.5W 100.8W 1.5Vp-p 1Vp-p 1Vp-p 1Vp-p 1Vp-p 1Vp-p MODEL CONSTANT CURRENT REGION Note.5 143 ~ 286V OUTPUT RATED POWER 100.1W RIPPLE CURRENT ±5% RIPPLE & NOISE 1.5Vp-p LINE REGULATION ±1% VOLTAGE TOLERANCE ±1.5% SETUP, RISE TIME 1000ms, 80ms / 230VAC HOLD UP TIME (Typ.) 16ms/230VAC VOLTAGE RANGE Note.2 90 ~ 264VAC FREQUENCY RANGE INPUT 90% AC CURRENT (Typ.) INRUSH CURRENT (Typ.) 2.2 A / 115VAC <0.25mA / 240VAC OVER VOLTAGE 220 ~ 240V 108 ~ 120V 315 ~ 345V 160 ~ 172V 80 ~ 97V Protection type : Shut down and latch off o/p voltage re-power on to recovery WORKING TEMP. -25 ~ +50℃ (Refer to "Derating Curve") -40 ~ +80℃, 10 ~ 95% RH ±0.03%/℃ (0 ~ 50℃) 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes IP67 approved,Design refer to TUV EN60950-1 I/P-O/P:3KVAC ISOLATION RESISTANCE I/P-O/P:100M Ohms / 500VDC / 25℃/ 70% RH Compliance to EN55022(CISPR22) Class B; EN61000-3-2 Class A(≦80% load); EN61000-3-3 EMC EMISSION DIMENSION 58 ~ 68V 10 ~ 95% RH non-condensing WITHSTAND VOLTAGE PACKING NOTE 65 ~ 80V SAFETY STANDARDS EMC IMMUNITY MTBF OTHERS COLD START 75A(twidth=980μs measured at 50% Ipeak) at 230VAC Hiccup mode, recovers automatically after fault condition is removed VIBRATION 89% 1 units (circuit breaker of type B) / 2 units (circuit breaker of type C) at 230VAC LEAKAGE CURRENT WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT EMC 89.5% 1.2A / 230VAC SHORT CIRCUIT PROTECTION SAFETY & 127VDC ~ 370VDC 47 ~ 63Hz EFFICIENCY (Typ.) MAX. No. of PSUs on 16A CIRCUIT BREAKER 2000ms,80ms/115VAC at full load 10ms/115vac at full load Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024, light industry level , criteria A 511Khrs min. MIL-HDBK-217F (25℃) 190*52*37mm (L*W*H) 0.61Kg;20pcs/13.2Kg/0.55CUFT 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature. 2. Derating may be needed under low input voltages. Please check the static characteristics for more details. 3. The power supply is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected by the complete installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again. 4. Refer to warranty statement. 5. Constant current operation region is within 50% ~100% rated output voltage. This is the suitable operation region for LED related applications, but please reconfirm special electrical requirements for some specific system design. 6.Suitable for indoor use or outdoor use without direct sunlight exposure, please avoid immerse in the water over 30minutes. 7. The unit might not be suitable for lighting applications in EU countries. Please check with your local authorities for the possible use of the unit. File Name:LPC-100-SPEC 2015-05-28 PDF
Документация на серию LPC-100 

LPC-100.cdr

Дата модификации: 04.06.2015

Размер: 68.3 Кб

2 стр.

    Внимание! Точность указанного на сайте описания товара не может быть гарантирована. Для получения более полной и точной информации о товаре смотрите техническое описание (Datasheet) на сайте производителя.