LPF-60D-24

MEAN WELL
AC/DC драйвер LED
развернуть ▼ свернуть ▲
Фотография серии LPF-60D

Технические характеристики

показать свернуть
Тип преобразователя
Мощность выходная
Диапазон выходных напряжений
Диапазон выходных токов
Напряжение сети/входное номинальное
Режим стабилизации
Тип диммирования ШИМ, 0/1-10 В, потенциометр внешний
Исполнение конструктивное
Степень защиты (IP)
Подстройка выходных параметров
Диапазон входных напряжений (AC)
Диапазон входных напряжений (DC)
Напряжение изоляции вход-выход
Количество выходов
Коэффициент мощности
Эффективность
Функция защиты КЗ, перегрузка, перенапряжение, перегрев
Температура рабочая
Размер 162×43×32 мм
Применение
Особенности
Нашли ошибку? Выделите её курсором и нажмите CTRL + ENTER

Файлы 2

показать свернуть
LPF-60D 60W Constant Current Mode LED Driver series User’s Manual 110 M M SELV IP67 (CCC optional) ■ Features Constant Current mode output Plastic housing with Class II design Built-in active PFC function Class 2 power unit IP67 rating for indoor or outdoor installations Function: 3 in 1 dimming Typical lifetime>50000 hours 5 years warranty ■ Applications LED panel lighting LED downlight LED decorative lighting LED tunnel lighting Moving sign ■ Description LPF-60D series is a 60W AC/DC LED driver featuring the constant current output. LPF-60D operates from 90～305VAC and offers models with different rated voltage ranging between 12V and 54V. Thanks to the high efficiency up to 90%, with the fanless design, the entire series is able to operate for -40 ℃ ~ +80 ℃ case temperature under free air convection. The entire series is rated with IP67 ingress protection level and is suitable to work for a variety of applications at dry, damp or wet locations. LPF-60D is equipped with the 3 in 1 dimming function so as to provide the design flexibility for LED lighting system. ■ Model Encoding LPF - 60D - 30 Rated output voltage(12V/15V/20V/24V/30V/36V/42V/48V/54V) Rated wattage Series name File Name:LPF-60D-SPEC 2021-09-03 PDF
Документация на LPF-60D-54 

LPF-60D.cdr

Дата модификации: 03.09.2021

Размер: 131.5 Кб

8 стр.

LPF-60D 60W Single Output Switching Power Supply series ■ Features : •Universal AC input / Full range (up to 305VAC) •Built-in active PFC function •High efficiency up to 90% •Protections: Short circuit / Over current / Over voltage / Over temperature •Cooling by free air convection •Fully isolated plastic case •Fully encapsulated with IP67 level (Note.6) •Class Ⅱ power unit, no FG •Class 2 power unit •Built-in 3 in 1 dimming function (1~10Vdc or PWM signal or resistance) •Suitable for LED lighting and moving sign applications •Compliance to worldwide safety regulations for lighting •Suitable for dry / damp / wet locations •5 years warranty F 110 M M SELV IP67 ( for 48V,54V only) ( except for 48V,54V ) SPECIFICATION MODEL LPF-60D-12 LPF-60D-15 LPF-60D-20 LPF-60D-24 LPF-60D-30 LPF-60D-36 LPF-60D-42 LPF-60D-48 LPF-60D-54 12V DC VOLTAGE CONSTANT CURRENT REGION Note.4 7.2 ~12V OUTPUT 24V 30V 36V 42V 48V 54V 12 ~ 20V 14.4 ~ 24V 21.6 ~ 36V 25.2 ~ 42V 28.8 ~ 48V 32.4 ~ 54V 1.67A 1.43A 1.25A 1.12A RATED CURRENT 5A 4A 3A 2.5A RATED POWER 60W 60W 60W 60W 60W 60.12W 60.06W 60W 60.48W RIPPLE & NOISE (max.) Note.2 150mVp-p 150mVp-p 150mVp-p 150mVp-p 200mVp-p 250mVp-p 250mVp-p 250mVp-p 350mVp-p VOLTAGE TOLERANCE Note.3 ±4.0% ±4.0% ±4.0% ±4.0% ±4.0% ±4.0% ±4.0% ±4.0% ±4.0% LINE REGULATION ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% LOAD REGULATION ±2.0% ±1.5% ±1.0% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% Note.7 1000ms, 80ms / 115VAC at full load HOLD UP TIME (Typ.) VOLTAGE RANGE 16ms/230VAC Note.5 90 ~ 305VAC 1000ms, 80ms / 230VAC 16ms/115VAC at full load 127 ~ 431VDC FREQUENCY RANGE 47 ~ 63Hz POWER FACTOR (Typ.) PF>0.97/115VAC, PF>0.95/230VAC, PF>0.92/277VAC at full load (Please refer to "Power Factor Characteristic" curve) EFFICIENCY (Typ.) 86% 88% 90% 87% 89% 0.8A / 115VAC 0.4A / 230VAC 0.32A / 277VAC COLD START 55A(twidth=270μs measured at 50% Ipeak) at 230VAC AC CURRENT (Typ.) INRUSH CURRENT (Typ.) LEAKAGE CURRENT OVER CURRENT PROTECTION 20V 9 ~ 15V 18 ~ 30V 2A SETUP, RISE TIME INPUT 15V 90% Note.4 OVER VOLTAGE -40 ~ +70℃ (Refer to "Derating Curve") VIBRATION SAFETY STANDARDS Note.6 41 ~ 49V -40 ~ +80℃, 10 ~ 95% RH ±0.03%/℃ (0 ~ 50℃) 10 ~ 500Hz, 5G 12min./1cycle, period for 72min. each along X, Y, Z axes UL8750, CSA C22.2 No. 250.0-08(except for 48V, 54V), EN61347-1, EN61347-2-13 independent, IP67, J61347-1, J61347-2-13 approved ; design refer to UL60950-1, TUV EN60950-1 I/P-O/P:3.75KVAC EMC I/P-O/P:100M Ohms / 500VDC / 25℃/ 70% RH Compliance to EN55015, EN61000-3-2 Class C (≧60% load) ; EN61000-3-3 PACKING NOTE 59 ~ 66V 20 ~ 95% RH non-condensing SAFETY & WITHSTAND VOLTAGE ISOLATION RESISTANCE 46 ~ 54V Protection type : Shut down and latch off o/p voltage, re-power on to recover Shut down o/p voltage, re-power on to recover DIMENSION 54 ~ 63V Protection type : Constant current limiting, recovers automatically after fault condition is removed Hiccup mode, recovers automatically after fault condition is removed. 34 ~ 40V 15 ~ 17V 17.5 ~ 21V 23 ~ 27V 28 ~ 35V WORKING TEMP. WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT OTHERS 90% 95 ~ 108% OVER TEMPERATURE EMC IMMUNITY MTBF 90% <0.75mA / 240VAC SHORT CIRCUIT EMC EMISSION 90% Compliance to EN61000-4-2,3,4,5,6,8,11; EN61547, EN55024, light industry level(surge 2KV), criteria A 396.7K hrs min. MIL-HDBK-217F (25℃) 162.5*43*32mm (L*W*H) 0.45Kg; 32pcs/15.4Kg/0.93CUFT 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. Please refer to "DRIVING METHODS OF LED MODULE". 5. Derating may be needed under low input voltages. Please check the static characteristics for more details. 6. Suitable for indoor use or outdoor use without direct sunlight exposure. Please avoid immerse in the water over 30 minutes. 7. Length of set up time is measured at cold first start. Turning ON/OFF the power supply may lead to increase of the set up time. 8. The power supply is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected by the complete installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again. 9. Direct connecting to LEDs is suggested, but is not suitable for using additional drivers. File Name:LPF-60D-SPEC 2014-01-15 PDF
Документация на серию LPF-60D 

LPF-60D.cdr

Дата модификации: 23.01.2014

Размер: 119.4 Кб

4 стр.

    Внимание! Точность указанного на сайте описания товара не может быть гарантирована. Для получения более полной и точной информации о товаре смотрите техническое описание (Datasheet) на сайте производителя.

    HLG-100H-24A (MW)