LPS-75-48

AC/DC преобразователь: Открытый; 75 Вт; Выход 48В/1.56А; Вход: 90...264VAC / 127...370VDC; -20...70°C
развернуть ▼ свернуть ▲
 
 

Технические характеристики

показать свернуть
Выходная мощность (ном)
Выход
Напряжение 1 канала
Выходной ток 1 канала
Тип стабилизации
Вход
Конструктивное исполнение
Возможности
Типы защиты КЗ, перегрузка, перенапряжение
Количество выходов
Тип управления выходом
Исполнение
Входное напряжение AC
Входное напряжение DC
Коэффициент мощности
Напряжение изоляции вход-выход
Напряжение изоляции вход-земля
Напряжение изоляции выход-земля
Применение
КПД
Шум
Размер 222×55×30 мм
Рабочая температура
Нашли ошибку? Выделите её курсором и нажмите CTRL + ENTER

Аналоги 2

показать свернуть
Тип Наименование Корпус Упаковка i P вых Выход U1 I1 Стабилизация Вход Конструктив Возможности Защита Выходов Управление IP U вх AC U вх DC Коэф. мощн. U изол вх-вых U изол вх-земля U изол вых-земля Применение КПД Шум T раб Примечание Карточка
товара
A+ RPS-75-48 (MW)
 
7 шт AC-DC сетевой преобразователь - P вых: 75 Вт; Выход: 48 В; U1: 45.6...52.8 В; I1: до 2.... КЗ, перегрузка, перенапряжение AC-DC Regulated Power Supply Module
A+ ELP-75-48 (MW)
 

Файлы 2

показать свернуть
LPS-75 75W Single Output Switching Power Supply series User’s Manual ■ Features : Universal AC input / Full range Protections: Short circuit / Overload / Over voltage Cooling by free air convection PWM control and regulated Small and compact size Built-in remote ON-OFF control LED indicator for power on 100% full load burn-in test 2 years warranty Bauar t gepruft Sicherheit egel ma ge od o s be wac g www. tuv.com ID 2000000000 SPECIFICATION UL62368-1 MODEL INPUT LPS-75-3.3 LPS-75-5 LPS-75-12 LPS-75-15 LPS-75-24 LPS-75-48 3.3V 5V 12V 15V 24V 48V RATED CURRENT 15A 15A 6.2A 5A 3.2A 1.56A CURRENT RANGE 0 ~ 16.5A 0 ~ 16.5A 0 ~ 6.8A 0 ~ 5.5A 0 ~ 3.5A 0 ~ 1.7A RATED POWER 49.5W 75W 74.4W 75W 76.8W 75W 82.5W 81.6W 82.5W 84W 74.88W 80mVp-p 100mVp-p 100mVp-p 120mVp-p 120mVp-p Note.4 54.45W RIPPLE & NOISE (max.) Note.2 80mVp-p VOLTAGE ADJ. RANGE 3 ~3.5V VOLTAGE TOLERANCE Note.3 ±3.0% 22 ~ 27V 45 ~ 54V ±2.0% ±2.0% ±1.0% ±1.0% ±1.0% ±1.0% ±1.0% ±3.0% ±3.0% ±2.0% ±2.0% ±1.0% ±1.0% SETUP, RISE TIME 100ms, 35ms/230VAC HOLD UP TIME (Typ.) 60ms/230VAC VOLTAGE RANGE 90 ~ 264VAC FREQUENCY RANGE 47 ~ 63Hz 81% 83% 83% 27.6 ~ 32.4V 57.6 ~ 67.2V 100ms, 35ms/115VAC at full load 12ms/115VAC at full load 127 ~ 370VDC EFFICIENCY(Typ.) 69% AC CURRENT (Typ.) INRUSH CURRENT (Typ.) 1.9A/115VAC 1.1A/230VAC COLD START 18A/115VAC 36A/230VAC OVERLOAD REMOTE ON/OFF WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION SAFETY STANDARDS SAFETY & WITHSTAND VOLTAGE ISOLATION RESISTANCE EMC (Note 5) EMC EMISSION 77% 80% <1mA / 240VAC 115 ~ 150% rated output power Protection type : Hiccup mode, recovers automatically after fault condition is removed 3.8 ~ 4.45V 5.75 ~ 6.75V 13.8 ~ 16.2V 17.25 ~ 20.25V Protection type : Hiccup mode, recovers automatically after fault condition is removed RC+/RC- : 0 ~ 0.8V power on ; 4 ~ 10V power off -20 ~ +70℃ (Refer to "Derating Curve") 20 ~ 90% RH non-condensing -20 ~ +85℃, 10 ~ 95% RH ±0.04%/℃ (0 ~ 50℃) 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes UL62368-1, TUV BS EN/EN62368-1, EAC TP TC 004 approved I/P-O/P:3KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC/ 25℃/ 70% RH Compliance to BS EN/EN55032 (CISPR32) Class B, BS EN/EN61000-3-2,-3, EAC TP TC 020 EMC IMMUNITY Compliance to BS EN/EN61000-4-2,3,4,5,6,8,11, BS EN/EN55024, BS EN/EN61000-6-2 (BS EN/EN50082-2), heavy industry level, criteria A, EAC TP TC 020 MTBF 355Khrs min. MIL-HDBK-217F (25℃) 222*55*30mm (L*W*H) 0.3Kg; 48pcs/15.6Kg/1.23CUFT DIMENSION PACKING NOTE 13.5 ~ 16.5V ±2.0% ±1.0% WORKING TEMP. OTHERS 11 ~ 13.5V ±2.0% LOAD REGULATION OVER VOLTAGE FUNCTION 4.75 ~ 5.5V ±3.0% LINE REGULATION LEAKAGE CURRENT PROTECTION TPTC004 DC VOLTAGE PEAK LOAD(10sec.) OUTPUT BS EN/EN62368-1 IEC62368-1 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. 33.3% Duty cycle maximum within every 30 seconds. Average output power should not exceed the rated power. 5. The power supply is considered a component which will be installed into a final equipment. All the EMC tests are been executed by mounting the unit on a 360mm*360mm metal plate with 1mm of thickness. The final equipment must be re-confirmed that it still meets EMC directives. For guidance on how to perform these EMC tests, please refer to “EMI testing of component power supplies.” (as available on http://www.meanwell.com) 6. The ambient temperature derating of 3.5℃/1000m with fanless models and of 5℃/1000m with fan models for operating altitude higher than 2000m(6500ft). ※ Product Liability Disclaimer:For detailed information, please refer to https://www.meanwell.com/serviceDisclaimer.aspx File Name:LPS-75-SPEC 2021-09-15 PDF
Документация на LPS-75-5 

LPS-75-20210915.cdr

Дата модификации: 26.11.2021

Размер: 93.9 Кб

2 стр.

LPS-75 75W Single Output Switching Power Supply series Features : Universal AC input / Full range Protections:Short circuit/Over load/Over voltage Cooling by free air convection PWM control and regulated Small and compact size Built-in remote ON-OFF control LED indicator for power on 100% full load burn-in test 2 years warranty SPECIFICATION MODEL LPS-75-3.3 LPS-75-5 LPS-75-12 LPS-75-15 LPS-75-24 LPS-75-48 DC VOLTAGE 3.3V 5V 12V 15V 24V 48V RATED CURRENT 15A 15A 6.2A 5A 3.2A 1.56A CURRENT RANGE 0 ~ 16.5A 0 ~ 16.5A 0 ~ 6.8A 0 ~ 5.5A 0 ~ 3.5A 0 ~ 1.7A RATED POWER 49.5W 75W 74.4W 75W 76.8W 75W 82.5W 81.6W 82.5W 84W 81.6W RIPPLE & NOISE (max.) Note.2 80mVp-p 80mVp-p 100mVp-p 100mVp-p 120mVp-p 120mVp-p VOLTAGE ADJ. RANGE 4.75 ~ 5.5V 11 ~ 13.5V 13.5 ~ 16.5V PEAK LOAD(10sec.) OUTPUT Note.4 54.45W VOLTAGE TOLERANCE Note.3 INPUT 22 ~ 27V 45 ~ 54V 3.0% 2.0% 2.0% 2.0% 2.0% LINE REGULATION 1.0% 1.0% 1.0% 1.0% 1.0% 1.0% LOAD REGULATION 3.0% 3.0% 2.0% 2.0% 1.0% 1.0% SETUP, RISE TIME 100ms, 35ms/230VAC HOLD TIME (Typ.) 60ms/230VAC VOLTAGE RANGE 90 ~ 264VAC FREQUENCY RANGE 47 ~ 63Hz 100ms, 35ms/115VAC at full load 12ms/115VAC at full load 127 ~ 370VDC 77% 80% EFFICIENCY(Typ.) 69% AC CURRENT (Typ.) INRUSH CURRENT (Typ.) 1.9A/115VAC 1.1A/230VAC COLD START 18A/115VAC 36A/230VAC 81% LEAKAGE CURRENT <1mA / 240VAC OVER LOAD 115 ~ 150% rated output power Protection type : Hiccup mode, recovers automatically after fault condition is removed OVER VOLTAGE 3.8 ~ 4.45V 5.75 ~ 6.75V 13.8 ~ 16.2V 17.25 ~ 20.25V Protection type : Hiccup mode, recovers automatically after fault condition is removed PROTECTION FUNCTION 3 ~3.5V 3.0% REMOTE ON/OFF WORKING TEMP. WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION SAFETY STANDARDS WITHSTAND VOLTAGE 83% 83% 27.6 ~ 32.4V 57.6 ~ 67.2V RC+/RC- : 0 ~ 0.8V power on ; 4 ~ 10V power off -20 ~ +70 (Refer to output load derating curve) 20 ~ 90% RH non-condensing -20 ~ +85 , 10 ~ 95% RH 0.04%/ (0 ~ 50 10 ~ 500Hz, 2G 10min./1cycle, Period for 60min.each along X, Y, Z axes UL60950-1, TUV EN60950-1 Approved I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC SAFETY & ISOLATION RESISTANCE EMC (Note 5) OTHERS I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC EMI CONDUCTION & RADIATION Compliance to EN55011, EN55022 (CISPR22) Class B HARMONIC CURRENT Compliance to EN61000-3-2,-3 EMS IMMUNITY MTBF DIMENSION PACKING NOTE Compliance to EN61000-4-2,3,4,5,6,8,11; ENV50204, EN55024, EN61000-6-2 (EN50082-2) Heavy industry level, criteria A 355Khrs min. MIL-HDBK-217F (25 ) 222*55*30mm (L*W*H) 0.3Kg; 48pcs/15.6Kg/1.12CUFT 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. 33.3% Duty cycle maximum within every 30 seconds. Average output power should not exceed the rated power. 5. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. File Name:LPS-75-SPEC 2006-04-13 PDF
Документация на серию LPS-75 

LPS-75.cdr

Дата модификации: 22.04.2006

Размер: 297.2 Кб

2 стр.

    Внимание! Точность указанного на сайте описания товара не может быть гарантирована. Для получения более полной и точной информации о товаре смотрите техническое описание (Datasheet) на сайте производителя.