PB-600-48

MEAN WELL
AC/DC преобразователи
развернуть ▼ свернуть ▲
 
 

Технические характеристики

показать свернуть
Выходная мощность (ном)
Выход
Напряжение 1 канала
Выходной ток 1 канала
Тип стабилизации
Вход
Конструктивное исполнение
Возможности ККМ, зарядное устройство, температурная компенсация, дистанционное Вкл/Выкл
Типы защиты КЗ, переполюсовка, перенапряжение, перегрев
Количество выходов
Тип управления выходом
Исполнение
Входное напряжение AC
Входное напряжение DC
Коэффициент мощности
Напряжение изоляции вход-выход
Напряжение изоляции вход-земля
Напряжение изоляции выход-земля
Применение
КПД
Размер 158×220×70 мм
Рабочая температура
Примечание
Нашли ошибку? Выделите её курсором и нажмите CTRL + ENTER

Аналоги 2

показать свернуть
Тип Наименование Корпус Упаковка i P вых Выход U1 I1 Стабилизация Вход Конструктив Возможности Защита Выходов Управление IP U вх AC U вх DC Коэф. мощн. U изол вх-вых U изол вх-земля U изол вых-земля Применение КПД Шум T раб Примечание Карточка
товара
P+ NPB-750-48 (MW)
 
в коробках 3 шт КЗ, перенапряжение, перегрев, переполюсовка
A+ HEP-600C-48 (MW)
 
1 шт КЗ, перегрузка, перенапряжение, перегрев AC-DC Power Factor Correction Module

Файлы 2

показать свернуть
PB-600 600W Intelligent Single Output Battery Charger ■ Features : series User’s Manual Charger for lead-acid batteries (flooded, Gel and AGM) and Li-ion batteries (lithium iron and lithium manganese) (Note.1) 2/3/8 stage charging (Note 5) Built-in battery rescue function Controlled by microprocessor Universal AC input / Full range Built-in active PFC function PF>0.95 Protection: Reverse polarity / Short circuit / Over voltage / Over temperature 3 color LED loading indicator Built-in remote ON-OFF control Built-in temperature compensation function Built-in fan speed control (depends on charging current) 3 years warranty UL1012 SPECIFICATION MODEL OUTPUT INPUT PROTECTION FUNCTION PB-600-12 BS EN/EN62368-1 BS EN/EN60335-1 (for 48V only) (for 12V,24V only) PB-600-24 PB-600-48 28.8V 57.6V FLOAT CHARGE VOLTAGE Vfloat 13.8V 27.6V 55.2V 70 ~ 210AH 35 ~ 105AH 21A 10.5A 87% 89% RECOMMENDED BATTERY CAPACITY(AMP HOURS)(Note 4) 135 ~ 400AH BATTERY TYPE Open & Sealed Lead Acid OUTPUT CURRENT 40A VOLTAGE RANGE 90 ~ 264VAC TPTC004 127 ~ 370VDC FREQUENCY RANGE 47 ~ 63Hz POWER FACTOR (Typ.) 0.95/230VAC EFFICIENCY (Typ.) 86% AC CURRENT (Typ.) INRUSH CURRENT (Typ.) 6.8A/115VAC 25A/115VAC LEAKAGE CURRENT <3.5mA / 240VAC OVER VOLTAGE 16 ~ 18V 32 ~ 35V Protection type : Shut down o/p voltage, re-power on to recover 0.98/115VAC at full load 3.4A/230VAC 50A/230VAC 64.5 ~ 69.5V OVER TEMPERATURE Protection type : Shut down o/p voltage, recovers automatically after temperature goes down REMOTE CONTROL Open: Normal work Short: Stop Charging LEAKAGE CURRENT FROM BATTERY (Typ.) 1mA 2 / 3 / 8 stage selectable FAST CHARGE CHARGER OK Relay contact (RY15) OUTPUT OK Relay contact (RY13) TEMPERATURE SENSE By NTC WORKING TEMP. -20 ~ +60℃ (Refer to "Derating Curve") SAFETY STANDARDS SAFETY & WITHSTAND VOLTAGE ISOLATION RESISTANCE EMC (Note 3) EMC EMISSION 20 ~ 90% RH non-condensing -40 ~ +85℃, 10 ~ 95% RH non-condensing ±0.05%/℃ (0 ~ 50℃) 10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes UL1012, TUV BS EN/EN60335-1, BS EN/EN60335-2-29 (except for 48V), BS EN/EN62368-1(48V only), EAC TP TC 004 approved I/P-O/P:3KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25℃/ 70% RH Compliance to BS EN/ EN55032 class B (CISPR32), BS EN/ EN61000-3-2,-3, EAC TP TC 020 EMC IMMUNITY Compliance to BS EN/ EN61000-4-2,3,4,5,6,8,11, BS EN/ EN55024; light industry level, criteria A, EAC TP TC 020 MTBF DIMENSION 135.6K hrs min. PACKING NOTE Bauar t gepruft Sicherheit egel ma ge od o s be wac g www. tuv.com ID 2000000000 BOOST CHARGE VOLTAGE Vboost 14.4V WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION OTHERS Bauar t gepruft Sicherheit egel ma ge od o s be wac g www. tuv.com ID 2000000000 MIL-HDBK-217F (25℃) 230*158*67mm(L*W*H) 2.2Kg; 6pcs/14.2Kg/1.76CUFT 1. Modification for charger specification may be required for different battery specification. Please contact battery vendor and MEAN WELL for details. 2. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature. 3. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. 4. This is Mean Well's suggested range. Please consult your battery manufacturer for their suggestions about maximum charging current limitation. 5. Please choose the "3 stage" selection when the charger is used to charge the batteries and power the loads in the same time. 6. The ambient temperature derating of 3.5℃/1000m with fanless models and of 5℃/1000m with fan models for operating altitude higher than 2000m(6500ft). ※ Product Liability Disclaimer:For detailed information, please refer to https://www.meanwell.com/serviceDisclaimer.aspx File Name:PB-600-SPEC 2021-08-20 PDF
Документация на PB-600-48 

PB-600.cdr

Дата модификации: 17.08.2021

Размер: 178.5 Кб

5 стр.

PB-600 600W Single Output Battery Charger series Features : 2/8 stage charging Universal AC input / Full range Built-in active PFC function PF>0.95 Protection: Reverse polarity / Short circuit / Over voltage / Over temperature Charger for lead-acid batteries 3 color LED loading indicator Built-in remote ON-OFF control Built-in temperature compensation function Built-in fan speed control (depends on charging current) 3 years warranty .. ( except for 48V ) SPECIFICATION MODEL OUTPUT INPUT PROTECTION FUNCTION PB-600-12 PB-600-24 PB-600-48 BOOST CHARGE VOLTAGE 14.4V 28.8V 57.6V FLOAT CHARGE VOLTAGE 13.8V 27.6V 55.2V 135 ~ 400AH 70 ~ 210AH 35 ~ 105AH 21A 10.5A 87% 89% RECOMMENDED BATTERY CAPACITY(AMP HOURS)(Note 3) BATTERY TYPE Open & Sealed Lead Acid OUTPUT CURRENT 40A VOLTAGE RANGE 90 ~ 264VAC FREQUENCY RANGE 47 ~ 63Hz EFFICIENCY (Typ.) 86% POWER FACTOR (Typ.) 0.95/230VAC 0.98/115VAC at full load AC CURRENT (Typ.) INRUSH CURRENT (Typ.) 6.8A/115VAC 25A/115VAC 3.4A/230VAC 50A/230VAC LEAKAGE CURRENT <3.5mA / 240VAC OVER VOLTAGE 16 ~ 18V 32 ~ 35V Protection type : Shut down o/p voltage, re-power on to recover 127 ~ 370VDC 64.5 ~ 69.5V OVER TEMPERATURE Protection type : Shut down o/p voltage, recovers automatically after temperature goes down REMOTE CONTROL Open: Normal work Short: Stop Charging LEAKAGE CURRENT FROM BATTERY (Typ.) 1mA 2 / 8 stage selectable FAST CHARGE CHARGING OK Relay contact (RY15) OUTPUT OK Relay contact (RY13) TEMPERATURE SENSE By NTC WORKING TEMP. -20 ~ +60 (refer to output load derating curve) 20 ~ 90% RH non-condensing WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY -40 ~ +85 , 10 ~ 95% RH TEMP. COEFFICIENT 0.05%/ (0 ~ 50 ) VIBRATION 10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes UL1012, TUV EN60335-1, EN60335-2-29 (except for 48V) approved SAFETY STANDARDS SAFETY & EMC (Note 2) WITHSTAND VOLTAGE MTBF DIMENSION PACKING NOTE I/P-FG:1.5KVAC O/P-FG:0.5KVAC I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25 EMI CONDUCTION & RADIATION Compliance to EN55022 (CISPR22) HARMONIC CURRENT EMS IMMUNITY OTHERS I/P-O/P:3KVAC ISOLATION RESISTANCE / 70% RH Compliance to EN61000-3-2,-3 Compliance to EN61000-4-2,3,4,5,6,8,11; ENV50204, EN55024; light industry level, criteria A 135.6Khrs min. MIL-HDBK-217F (25 ) 230*158*67mm(L*W*H) 2.2Kg; 6pcs/14.2Kg/1.76CUFT 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature. 2. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. 3. This is Mean Well's suggested range. Please consult your battery manufacturer for their suggestions about maximum charging current limitation. File Name:PB-600-SPEC 2009-06-22 PDF
Документация на серию PB-600 

PB-600.cdr

Дата модификации: 15.07.2009

Размер: 435.7 Кб

5 стр.

    Публикации 1

    показать свернуть
    23 марта 2023
    статья

    Диоды и диодные мосты SUNCO – рациональный выбор для любых приложений

    Константин Кузьминов (г. Заполярный) Китайская компания SUNCO занимается полным циклом производства полупроводников. Ее продукция отличается широким разнообразием и при этом соответствует мировым стандартам. Выпрямительные и сигнальные диоды,... ...читать

    Внимание! Точность указанного на сайте описания товара не может быть гарантирована. Для получения более полной и точной информации о товаре смотрите техническое описание (Datasheet) на сайте производителя.