PCD-25-350A

MEAN WELL
AC/DC драйвер LED
развернуть ▼ свернуть ▲
Фотография серии PCD-25
Чертеж серии PCD-25
 
 

Технические характеристики

показать свернуть
Тип преобразователя
Мощность выходная
Диапазон выходных напряжений
Диапазон выходных токов
Напряжение сети/входное номинальное
Режим стабилизации
Диапазон входных напряжений (DC)
Функция защиты
Температура рабочая
Нашли ошибку? Выделите её курсором и нажмите CTRL + ENTER

Файлы 2

показать свернуть
25W Single Output AC Dimmable LED Power Supply PCD-25 ■ Features : AC phase-cut dimming Work with leading edge and trailing edge TRIAC dimmers 115VAC or 230VAC models available Built-in active PFC function Constant current design Protections: Short circuit / Over temperature Cooling by free air convection Fully isolated plastic case IP42 design Class Ⅱ power unit, no FG Class 2 power unit Suitable for LED related fixture or appliance series User’s Manual (such as LED Decoration or Advertisement devices) 100% full load burn-in test Low cost High reliability 3 years warranty SELV PCD-25-350 A IP42 IS 15885(Part 2/Sec13) 110 THOMAS SAMUEL THOMAS SAMUEL ( for B type only) ( for A type only) ( for B type only) R-41027766 (optional) ( for 350B,700B only) ( for B type only) ( for B type only) ( for B type only) A : With AC input 90~ 135VAC. B : With AC input 180~ 295VAC. SPECIFICATION MODEL RATED CURRENT PCD-25-350 PCD-25-700 PCD-25-1050 PCD-25-1400 350mA 700mA 1050mA 1400mA 24 ~ 36V 16 ~ 24V 12 ~ 18V 25.2W OPERATING VOLTAGE RANGE 40 ~ 58V OUTPUT CURRENT ACCURACY ±5.0% RATED POWER 20.3W 25.2W 25.2W RIPPLE & NOISE (max.) Note.1 4.6Vp-p 2.7Vp-p 2.2Vp-p 2Vp-p NO LOAD OUTPUT VOLTAGE (max.) 60V 50V 35V 25V SETUP TIME 500ms / 230VAC 2000ms / 115VAC at full load FREQUENCY RANGE 47 ~ 63Hz PF>0.9/115VAC, PF>0.9/230VAC, PF>0.9/277VAC at full load (Please refer to "Power Factor Characteristic" curve) POWER FACTOR (Typ.) A series THD< 20% when output loading≧70% at 115VAC TOTAL HARMONIC DISTORTION B series THD< 20% when output loading≧70% at 230VAC input and output loading≧80% at 277VAC input INPUT EFFICIENCY (Typ.) 82% AC CURRENT (Typ.) INRUSH CURRENT(max.) 0.6A/115VAC 0.3A/230VAC 0.2A/277VAC COLD START 10A(twidth=20μs measured at 50% Ipeak) at 115VAC / 230VAC MAX. No. of PSUs on 16A CIRCUIT BREAKER 81% 80.5% 81% A series 37 units (circuit breaker of type B) / 37 units (circuit breaker of type C) at 115VAC B series 80 units (circuit breaker of type B) / 80 units (circuit breaker of type C) at 230VAC LEAKAGE CURRENT SHORT CIRCUIT PROTECTION OVER TEMPERATURE WORKING TEMP. WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT <0.5mA 120VAC / 240VAC Hiccup mode, recovers automatically after fault condition is removed. Shut down o/p voltage, re-power on to recover -30 ~ +60℃ (Refer to "Derating Curve") 20 ~ 95% RH non-condensing -40 ~ +80℃, 10 ~ 95% RH ±0.03%/℃ (0 ~ 50℃) VIBRATION 10 ~ 500Hz, 2G 12min./1cycle, period for 72min. each along X, Y, Z axes SAFETY STANDARDS UL8750, CSA C22.2 No. 250.0-08, ENEC BS EN/EN613471, BS EN/EN61347-2-13, BS EN/EN62384(for B type only), BIS IS15885(for 350B,700B only), EAC TP TC 004,IP42 approved ; design refer to UL60950-1, BS EN/EN61347-1, BS EN/EN61347-2-13 SAFETY & WITHSTAND VOLTAGE I/P-O/P:3.75KVAC EMC I/P-O/P:100M Ohms / 500VDC / 25℃/ 70% RH Compliance to BS EN/EN55015 (B type only), BS EN/EN61000-3-2 Class C ; BS EN/EN61000-3-3, FCC part 18 non-consumer equipment (A type only), EAC TP TC 020 ISOLATION RESISTANCE EMC EMISSION EMC IMMUNITY MTBF OTHERS DIMENSION PACKING NOTE Compliance to BS EN/EN61000-4-2,3,4,5,6,8,11, BS EN/EN55024,BS EN/EN61547, light industry level, criteria A, EAC TP TC 020 906.5K hrs min. MIL-HDBK-217F (25℃) 84*57*29.5mm (L*W*H) 0.19Kg; 72pcs/14.7Kg/0.92CUFT 1. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 2. Direct connecting to LEDs is suggested, but is not suitable for using additional drivers. 3. To fulfill requirements of the latest ErP regulation for lighting fixtures, this LED power supply can only be used behind a switch without permanently connected to the mains. 4. The ambient temperature derating of 3.5℃/1000m with fanless models and of 5℃/1000m with fan models for operating altitude higher than 2000m(6500ft). 5. For any application note and IP water proof function installation caution, please refer our user manual before using. https://www.meanwell.com/Upload/PDF/LED_EN.pdf ※ Product Liability Disclaimer：For detailed information, please refer to https://www.meanwell.com/serviceDisclaimer.aspx File Name:PCD-25-SPEC 2021-09-10 PDF
Документация на PCD-25-700B 

PCD-25.cdr

Дата модификации: 06.09.2021

Размер: 98.8 Кб

4 стр.

PCD-25 25W Single Output AC Dimmable LED Power Supply series Features : AC phase-cut dimming Work with leading edge and trailing edge dimmers 115VAC or 230VAC models available Fully isolated plastic case Constant current design Protections: Short circuit / Overload / Over temperature Built-in active PFC function Cooling by free air convection Suitable for indoor LED lighting applications 100% full load burn-in test Low cost High reliability 3 years warranty SELV PCD-25-350 A ( for A type only) ( for B type only) A : With AC input 90~ 135VAC. B : With AC input 180~ 295VAC. SPECIFICATION MODEL RATED CURRENT PCD-25-350 PCD-25-700 PCD-25-1050 PCD-25-1400 350mA 700mA 1050mA 1400mA 12 ~ 18V OPERATING VOLTAGE RANGE 40 ~ 58V OUTPUT INPUT 24 ~ 36V 16 ~ 24V CURRENT RANGE 0 ~ 350mA 0 ~ 700mA 0 ~ 1050mA 0 ~ 1400mA RATED POWER 20.3W 25.2W 25.2W 25.2W RIPPLE & NOISE (max.) Note.1 4.6Vp-p 2.7Vp-p 2.2Vp-p 2Vp-p NO LOAD OUTPUT VOLTAGE (max.) 63V 50V 35V 25V 80.5% 80% SETUP TIME 1000ms / 230VAC 2000ms / 115VAC at full load FREQUENCY RANGE 47 ~ 63Hz POWER FACTOR PF 0.9 at full load and rated output voltage EFFICIENCY(Typ.) 82% AC CURRENT INRUSH CURRENT(max.) 0.6A/115VAC 40A/230VAC LEAKAGE CURRENT OVER CURRENT PROTECTION SHORT CIRCUIT OVER TEMPERATURE WORKING TEMP. WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT 81% 0.3A/230VAC <0.5mA / 240VAC 95 ~ 110% Protection type : Constant current limiting, recovers automatically after fault condition is removed Hiccup mode, recovers automatically after fault condition is removed. 95 10 (TSW1) detect on heatsink of power transistor Protection type : Shut down o/p voltage -30 ~ +60 (Refer to output load derating curve) 20 ~ 95% RH non-condensing -40 ~ +80 0.03%/ , 10 ~ 95% RH (0 ~ 50 ) VIBRATION 10 ~ 500Hz, 2G 12min./1cycle, period for 72min. each along X, Y, Z axes SAFETY STANDARDS TUV EN61347-1, EN61347-2-13 approved ; Design refer to UL1310 Class 2 WITHSTAND VOLTAGE I/P-O/P:3.75KVAC SAFETY & ISOLATION RESISTANCE I/P-O/P:100M Ohms / 500VDC / 25 / 70% RH EMC EMI CONDUCTION & RADIATION Compliance to EN55015 Class B (B type only), FCC part18 Class A (A type only) Compliance to EN61000-3-2 Class C ; EN61000-3-3 HARMONIC CURRENT EMS IMMUNITY MTBF OTHERS DIMENSION PACKING NOTE Compliance to EN61000-4-2,3,4,5,6,8,11; ENV50204, EN55024,EN61547, light industry level, criteria A 906.5Khrs min. MIL-HDBK-217F (25 84*57*29.5mm (L*W*H) 0.19Kg; 72pcs/14.7Kg/0.92CUFT ) 1. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 2. Direct connecting to LEDs is not using additional drivers is highly recommended. File Name:PCD-25-SPEC 2010-12-30 PDF
Документация на серию PCD-25 

PCD-25.cdr

Дата модификации: 31.12.2010

Размер: 169.5 Кб

3 стр.

    Публикации 1

    показать свернуть
    26 апреля 2021
    новость

    Экосистема MEAN WELL. Решения для любых задач электропитания (материалы вебинара)

    Программа показатьсвернуть Приглашаем всех желающих на вебинар, посвященный линейке поставок компании MEAN WELL и ее подходу к производству источников питания – как экосистемы продукции и услуг. Экосистема MEAN WELL позволяет подобрать... ...читать

    Внимание! Точность указанного на сайте описания товара не может быть гарантирована. Для получения более полной и точной информации о товаре смотрите техническое описание (Datasheet) на сайте производителя.

    APC-12-700 (MW)