PLD-25-1400

MEAN WELL
AC/DC драйвер LED
развернуть ▼ свернуть ▲
Фотография серии PLD-25
Чертёж серии PLD-25
 
 

Технические характеристики

показать свернуть
Тип преобразователя
Мощность выходная
Диапазон выходных напряжений
Диапазон выходных токов
Напряжение сети/входное номинальное
Режим стабилизации
Тип диммирования
Исполнение конструктивное
Степень защиты (IP)
Подстройка выходных параметров
Диапазон входных напряжений (AC)
Диапазон входных напряжений (DC)
Напряжение изоляции вход-выход
Количество выходов
Коэффициент мощности
Эффективность
Функция защиты
Температура рабочая
Размер 84×57×29.5 мм
Применение
Нашли ошибку? Выделите её курсором и нажмите CTRL + ENTER

Файлы 2

показать свернуть
PLD-25 25W Single Output LED Power Supply ■ Features : Universal AC input / Full range (up to 295VAC) Built-in active PFC function Constant current design Protections: Short circuit / Over temperature Cooling by free air convection Fully isolated plastic case Class 2 Power Unit Class Ⅱ power unit, no FG IP42 design Suitable for LED related fixture or appliance series User’s Manual (such as LED Decoration or Advertisement devices) 100% full load burn-in test Low cost High reliability Suitable for dry / damp locations 3 years warranty SELV SPECIFICATION MODEL PLD-25-350 RATED CURRENT PLD-25-700 350mA OPERATING VOLTAGE RANGE 40 ~ 58V OUTPUT CURRENT ACCURACY ±5.0% RATED POWER 20.3W PROTECTION EMC 700mA 1050mA 1400mA 24 ~ 36V 16 ~ 24V 12 ~ 18V 25.2W 25.2W 2.2Vp-p 2Vp-p NO LOAD OUTPUT VOLTAGE (max.) 60V 50V 35V 25V 500ms / 230VAC 2000ms / 115VAC at full load VOLTAGE RANGE 90 ~ 295VAC FREQUENCY RANGE POWER FACTOR (Typ.) 47 ~ 63Hz PF>0.98/115VAC, PF>0.92/230VAC, PF>0.91/277VAC at full load (Please refer to "Power Factor Characteristic" curve) TOTAL HARMONIC DISTORTION THD< 20% when output loading≧70% at 115VAC/230VAC input and output loading≧80% at 277VAC input EFFICIENCY (Typ.) 85% AC CURRENT (Typ.) INRUSH CURRENT(Typ.) 0.6A/115VAC 0.3A/230VAC 0.2A/277VAC COLD START 25A(twidth=75μs measured at 50% Ipeak) at 230VAC MAX. No. of PSUs on 16A CIRCUIT BREAKER 72 units (circuit breaker of type B) / 80 units (circuit breaker of type C) at 230VAC 127 ~ 417VDC 86% 85% LEAKAGE CURRENT <0.5mA / 240VAC SHORT CIRCUIT OVER TEMPERATURE Hiccup mode, recovers automatically after fault condition is removed. Shut down o/p voltage, re-power on to recover WORKING TEMP. -30 ~ +60℃ (Refer to "Derating Curve") 84% 20 ~ 95% RH non-condensing -40 ~ +80℃, 10 ~ 95% RH ±0.03%/℃ (0 ~ 50℃) VIBRATION 10 ~ 500Hz, 2G 12min./1cycle, period for 72min. each along X, Y, Z axes SAFETY STANDARDS UL8750, CSA C22.2 No. 250.0-08, ENEC BS EN/EN 61347-1, BS EN/EN 61347-2-13 independent, BS EN/EN 62384, EAC TP TC 004, IP42 approved ; design refer to UL60950-1 WITHSTAND VOLTAGE I/P-O/P:3.75KVAC ISOLATION RESISTANCE I/P-O/P:100M Ohms / 500VDC / 25℃/ 70% RH Compliance to BS EN/EN55015, BS EN/EN61000-3-2 Class C (≦75% load) ; BS EN/EN61000-3-3, FCC part 18 non-consumer equipment, EAC TP TC 020 EMC IMMUNITY MTBF DIMENSION PACKING NOTE PLD-25-1400 2.7Vp-p EMC EMISSION OTHERS PLD-25-1050 25.2W WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT SAFETY & 110 RIPPLE & NOISE (max.) Note.1 4.6Vp-p SETUP TIME INPUT IP42 Compliance to BS EN/EN61000-4-2,3,4,5,6,8,11, BS EN/EN55024,BS EN/EN61547, light industry level, criteria A, EAC TP TC 020 968.6Khrs min. MIL-HDBK-217F (25℃) 84*57*29.5mm (L*W*H) 0.19Kg; 72pcs/14.7Kg/0.75CUFT 1. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 2. Direct connecting to LEDs is suggested, but is not suitable for using additional drivers. 3. To fulfill requirements of the latest ErP regulation for lighting fixtures, this LED power supply can only be used behind a switch without permanently connected to the mains. 4. The ambient temperature derating of 3.5℃/1000m with fanless models and of 5℃/1000m with fan models for operating altitude higher than 2000m(6500ft). 5. For any application note and IP water proof function installation caution, please refer our user manual before using. https://www.meanwell.com/Upload/PDF/LED_EN.pdf ※ Product Liability Disclaimer：For detailed information, please refer to https://www.meanwell.com/serviceDisclaimer.aspx File Name:PLD-25-SPEC 2021-09-10 PDF
Документация на PLD-25-700 

PLD-25.cdr

Дата модификации: 06.09.2021

Размер: 85.3 Кб

3 стр.

PLD-25 25W Single Output LED Power Supply series Features : Universal AC input / Full range (up to 295VAC) Built-in active PFC function Constant current design Protections: Short circuit / Over temperature Cooling by free air convection Fully isolated plastic case IP30 design Class power unit, no FG 100% full load burn-in test Low cost High reliability Suitable for dry / damp locations 3 years warranty 110 F SELV SPECIFICATION MODEL RATED CURRENT OUTPUT INPUT PROTECTION CURRENT ACCURACY PLD-25-350 PLD-25-700 PLD-25-1050 PLD-25-1400 700mA 1050mA 1400mA 24 ~ 36V 16 ~ 24V 12 ~ 18V 0 ~ 700mA 0 ~ 1050mA 0 ~ 1400mA 25.2W 25.2W 2.2Vp-p 2Vp-p NO LOAD OUTPUT VOLTAGE (max.) 63V 20.3W 50V 35V 25V SETUP TIME 1500ms / 230VAC 3000ms / 115VAC at full load VOLTAGE RANGE 90 ~ 295VAC FREQUENCY RANGE 47 ~ 63Hz POWER FACTOR (Typ.) PF>0.98/115VAC, PF>0.92/230VAC, PF>0.91/277VAC at full load (Please refer to "Power Factor Characteristic" curve) EFFICIENCY (Typ.) 85% AC CURRENT (Typ.) INRUSH CURRENT(max.) 0.6A/115VAC 40A/230VAC 127 ~ 417VDC 86% 85% <0.5mA / 240VAC SHORT CIRCUIT Hiccup mode, recovers automatically after fault condition is removed. 95 10 (RTH1) OVER TEMPERATURE 84% 0.3A/230VAC LEAKAGE CURRENT Protection type : Shut down o/p voltage, re-power on to recover -30 ~ +60 (Refer to "Derating Curve") 20 ~ 95% RH non-condensing -40 ~ +80 0.03%/ , 10 ~ 95% RH (0 ~ 50 ) 10 ~ 500Hz, 2G 12min./1cycle, period for 72min. each along X, Y, Z axes SAFETY STANDARDS Class 2 UL8750, CSA C22.2 No. 250.0-08(except for PLD-25-350,PLD-25-700) ; ENEC EN613471, EN61347-2-13 independent, IP30 approved WITHSTAND VOLTAGE I/P-O/P:3.75KVAC ISOLATION RESISTANCE I/P-O/P:100M Ohms / 500VDC / 25 / 70% RH Compliance to EN55015, EN61000-3-2 Class C ( 75% load) ; EN61000-3-3, FCC part18 Class A Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024,EN61547, light industry level, criteria A EMC EMISSION EMC IMMUNITY MTBF DIMENSION PACKING NOTE 5.0% 25.2W VIBRATION OTHERS 0 ~ 350mA 2.7Vp-p WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT EMC ( except PLD-25-350/700 ) RIPPLE & NOISE (max.) Note.1 4.6Vp-p RATED POWER WORKING TEMP. SAFETY & ( for PLD-25-350/700 ) 350mA OPERATING VOLTAGE RANGE 36 ~ 58V CURRENT RANGE IP30 968.6Khrs min. MIL-HDBK-217F (25 84*57*29.5mm (L*W*H) 0.19Kg; 72pcs/14.7Kg/0.75CUFT ) 1. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 2. Direct connecting to LEDs is suggested, but is not suitable for using additional drivers. File Name:PLD-25-SPEC 2011-11-29 PDF
Документация на серию PLD-25 

PLD-25.cdr

Дата модификации: 30.11.2011

Размер: 187.4 Кб

3 стр.

    Внимание! Точность указанного на сайте описания товара не может быть гарантирована. Для получения более полной и точной информации о товаре смотрите техническое описание (Datasheet) на сайте производителя.

    HLG-100H-24A (MW)