PM-15-15 PBF

MEAN WELL
15W Single Output Medical Grade Switching Power Supply PM-15 ■ Features : series User’s Manual Universal AC input / Full range Protections: Short circuit / Overload / Over voltage Ultra-miniature size, light weight Cooling by free air convection Isolation classⅡ Medical safety approved (2 x MOPP between primary to secondary) No load power consumption<0.5W 100% full load burn-in t...
развернуть ▼ свернуть ▲
Фотография серии PM-15
Чертеж серии PM-15
 
 

Технические характеристики

показать свернуть
Выходная мощность (ном)
Напряжение 1 канала
Выходной ток 1 канала
Тип стабилизации
Типы защиты SHORT CIRCUIT; OVERLOAD; OVER VOLTAGE
Количество выходов
Входное напряжение AC
КПД
Размер 75×53×22.7 мм
Рабочая температура
Примечание AC-DC Regulated Power Supply Module, 1 Output, 15W, Hybrid
Нашли ошибку? Выделите её курсором и нажмите CTRL + ENTER

Файлы 2

показать свернуть
15W Single Output Medical Grade Switching Power Supply PM-15 ■ Features : series User’s Manual Universal AC input / Full range Protections: Short circuit / Overload / Over voltage Ultra-miniature size, light weight Cooling by free air convection Isolation classⅡ Medical safety approved (2 x MOPP between primary to secondary) No load power consumption<0.5W 100% full load burn-in test Fixed switching frequency at 67KHz High reliability Suitable for BF application with appropriate system consideration 3 years warranty EN 60601-1 IEC 60601-1 SPECIFICATION 8 MODEL OUTPUT INPUT PM-15-3.3 PM-15-5 PM-15-12 PM-15-15 PM-15-24 DC VOLTAGE 3.3V 5V 12V 15V 24V RATED CURRENT 3.5A 3A 1.25A 1A 0.63A CURRENT RANGE 0 ~ 3.5A 0 ~ 3A 0 ~ 1.25A 0 ~ 1A 0 ~ 0.63A RATED POWER 11.55W 15W 15W 15W 15.12W RIPPLE & NOISE (max.) Note.2 80mVp-p 80mVp-p 150mVp-p 150mVp-p 240mVp-p VOLTAGE TOLERANCE Note.3 ±3.0% ±2.0% ±2.0% ±2.0% ±2.0% LINE REGULATION ±1.0% ±1.0% ±0.5% ±0.5% ±0.5% LOAD REGULATION ±1.0% ±1.0% ±1.0% ±1.0% ±0.5% SETUP, RISE TIME 1000ms, 20ms/230VAC HOLD UP TIME (Typ.) 100ms/230VAC VOLTAGE RANGE 85 ~ 264VAC FREQUENCY RANGE 47 ~ 440Hz 79% 81% EFFICIENCY (Typ.) 73% AC CURRENT (Typ.) INRUSH CURRENT (Typ.) 0.35A/115VAC LEAKAGE CURRENT 1000ms, 20ms/115VAC at full load 24ms/115VAC at full load 120 ~ 370VDC 76% 78% 0.2A/230VAC COLD START 30A/115VAC 50A/230VAC Note.5 Touch current < 80μ A/264VAC OVERLOAD Above 105% rated output power Protection type : Hiccup mode, recovers automatically after fault condition is removed OVER VOLTAGE 13.8 ~ 16.2V 3.8 ~ 4.95V 5.75 ~ 6.75V Protection type : Shut off o/p voltage, clamping by zener diode PROTECTION WORKING TEMP. 17.25 ~ 20.25V -20 ~ +70℃ (Refer to "Derating Curve") 20 ~ 90% RH non-condensing WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION SAFETY STANDARDS ISOLATION LEVEL ±0.03%/℃ (0 ~ 50℃) 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes ANSI/AAMI ES60601-1, TUV EN60601-1, IEC60601-1, UL60950-1, EAC TP TC 004 approved Primary-Secondary: 2xMOPP SAFETY & WITHSTAND VOLTAGE I/P-O/P:4KVAC EMC (Note 4) OTHERS -40 ~ +85℃, 10 ~ 95% RH ISOLATION RESISTANCE EMC EMISSION I/P-O/P:100M Ohms / 500VDC / 25℃/ 70% RH Compliance to EN55011(CISPR11),EN55032 (CISPR32) Class B, EN61000-3-2,-3, EAC TP TC 020 EMC IMMUNITY MTBF Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024, EN60601-1-2, EN61204-3, medical level, criteria A, EAC TP TC 020 DIMENSION 75*53*22.7mm (L*W*H) 0.14Kg; 120pcs/17.8Kg/0.94CUFT PACKING NOTE 27.6 ~ 32.4V 499.7Khrs min. MIL-HDBK-217F (25℃) 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. 5. Touch current was measured from primary input to DC output. 6. The ambient temperature derating of 3.5℃/1000m with fanless models and of 5℃/1000m with fan models for operating altitude higher than 2000m(6500ft). File Name:PM-15-SPEC 2021-09-15 PDF
Документация на PM-15-5 

PM-15-20210915.cdr

Дата модификации: 15.09.2021

Размер: 68.7 Кб

2 стр.

PM-15 15W Output Switching Power Supply series Features : Universal AC input / Full range Protections: Short circuit / Overload / Over voltage Ultra-miniature size, light weight Cooling by free air convection Isolation class UL60601-1/IEC60601-1/EN60601-1 medical safety approved No load power consumption<0.5W 100% full load burn-in test Fixed switching frequency at 67KHz High reliability 3 years warranty EN60601-1 IEC60601-1 SPECIFICATION MODEL DC VOLTAGE OUTPUT INPUT PM-15-12 PM-15-15 PM-15-24 12V 15V 24V 3.5A 3A 1.25A 1A 0.63A CURRENT RANGE 0 ~ 3.5A 0 ~ 3A 0 ~ 1.25A 0 ~ 1A 0 ~ 0.63A RATED POWER 11.55W 15W 15W 15W 15.12W 80mVp-p 150mVp-p 150mVp-p 240mVp-p RIPPLE & NOISE (max.) Note.2 80mVp-p VOLTAGE TOLERANCE Note.3 3.0% 2.0% 2.0% 2.0% 2.0% LINE REGULATION 1.0% 1.0% 0.5% 0.5% 0.5% LOAD REGULATION 1.0% 1.0% 1.0% 1.0% 0.5% SETUP, RISE TIME 1000ms, 20ms/230VAC HOLD UP TIME (Typ.) 100ms/230VAC VOLTAGE RANGE 85 ~ 264VAC FREQUENCY RANGE 47 ~ 440Hz EFFICIENCY (Typ.) 73% AC CURRENT (Typ.) INRUSH CURRENT (Typ.) 0.35A/115VAC 1000ms, 20ms/115VAC at full load 24ms/115VAC at full load 120 ~ 370VDC 76% 78% 79% COLD START 30A/115VAC 50A/230VAC OVERLOAD OVER VOLTAGE 3.8 ~ 4.95V 5.75 ~ 6.75V Protection type : Shut off WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION SAFETY STANDARDS WITHSTAND VOLTAGE SAFETY & ISOLATION RESISTANCE EMC EMI CONDUCTION & RADIATION (Note 4) HARMONIC CURRENT EMS IMMUNITY MTBF DIMENSION PACKING 81% 0.2A/230VAC Above 105% rated output power Protection type : Hiccup mode, recovers automatically after fault condition is removed WORKING TEMP. NOTE PM-15-5 5V RATED CURRENT PROTECTION OTHERS PM-15-3.3 3.3V 13.8 ~ 16.2V 17.25 ~ 20.25V 27.6 ~ 32.4V -20 ~ +70 (Refer to output load derating curve) 20 ~ 90% RH non-condensing -40 ~ +85 , 10 ~ 95% RH 0.03%/ (0 ~ 50 10 ~ 500Hz, 2G 10min./1cycle, Period for 60min.each along X, Y, Z axes UL60601-1,TUV EN60601-1 Approved I/P-O/P:4KVAC I/P-O/P:100M Ohms/500VDC Compliance to EN55011(CISPR11),EN55022 (CISPR22) Class B Compliance to EN61000-3-2,-3 Compliance to EN61000-4-2,3,4,5,6,8,11; ENV50204, EN55024, EN60601-1-2, EN61204-3 Medical level, criteria A 499.7Khrs min. MIL-HDBK-217F (25 ) 75*53*22.7mm (L*W*H) 0.14Kg; 120pcs/17.8Kg/0.97CUFT 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. File Name:PM-15-SPEC 2006-12-18 PDF
Документация на серию PM-15 

PM-15.cdr

Дата модификации: 12.01.2007

Размер: 193.7 Кб

2 стр.

    Внимание! Точность указанного на сайте описания товара не может быть гарантирована. Для получения более полной и точной информации о товаре смотрите техническое описание (Datasheet) на сайте производителя.

    AD-155B (MW)