PS-15-12

Преобразователь напряжения AC-DC(DC-DC) на шасси.15Вт,Uвх=85-264В AC(120-370В DC),Uвых=12В/0…1.25А, изоляция 3КВ AC(вх-вых),защита от КЗ,перенапряжения, перегрева и перегрузки(автовосстан.),94х49х25 мм,-10...+60°С,открытый
развернуть ▼ свернуть ▲
 
 

Технические характеристики

показать свернуть
Выходная мощность (ном)
Выход
Напряжение 1 канала
Выходной ток 1 канала
Тип стабилизации
Вход
Конструктивное исполнение
Возможности
Типы защиты КЗ, перегрузка, перенапряжение, перегрев
Количество выходов
Тип управления выходом
Исполнение
Входное напряжение AC
Входное напряжение DC
Коэффициент мощности
Напряжение изоляции вход-выход
Напряжение изоляции вход-земля
Применение
КПД
Шум
Размер 94×49×25 мм
Рабочая температура
Нашли ошибку? Выделите её курсором и нажмите CTRL + ENTER

Аналоги 3

показать свернуть
Тип Наименование Корпус Упаковка i P вых Выход U1 I1 Стабилизация Вход Конструктив Возможности Защита Выходов Управление IP U вх AC U вх DC Коэф. мощн. U изол вх-вых U изол вх-земля U изол вых-земля Применение КПД Шум T раб Карточка
товара
P+ EPS-15-12 (MW) на поддоне 120 шт компактный дизайн, базовая модель КЗ, перегрузка, перенапряжение
A+ MFM-15-12 (MW) 1 шт КЗ, перегрузка, перегрев, перенапряжение
A+ PLP-20-12 (MW) 1 шт ИП для светодиодного освещения: 19,2 Вт; 1600 мА / 9…12 В (стаб. по току или напр.); вх... КЗ, перегрузка, перенапряжение, перегрев

Файлы 2

показать свернуть
PS-15 15W Single Output Switching Power Supply series ■ Features : •Universal AC input / Full range •Low leakage current <0.5mA •Protections: Short circuit / Overload / Over voltage / Over temperature •Cooling by free air convection •100% full load burn-in test •Fix switching frequency at 67KHz •Low cost •High reliability •2 years warranty SPECIFICATION MODEL OUTPUT INPUT PS-15-5 PS-15-12 PS-15-15 PS-15-24 PS-15-48 DC VOLTAGE 5V 12V 15V 24V 48V RATED CURRENT 2.8A 1.25A 1A 0.625A 0.313A CURRENT RANGE 0 ~ 2.8A 0 ~ 1.25A 0 ~ 1A 0 ~ 0.625A 0 ~ 0.313A RATED POWER 14W 15W 15W 15W 15W RIPPLE & NOISE (max.) Note.2 100mVp-p 120mVp-p 120mVp-p 150mVp-p 200mVp-p VOLTAGE TOLERANCE Note.3 ±2.0% ±2.0% ±2.0% ±2.0% ±2.0% LINE REGULATION ±1.0% ±1.0% ±1.0% ±0.5% ±0.5% LOAD REGULATION ±1.0% ±1.0% ±1.0% ±0.5% ±0.5% SETUP, RISE TIME 5 ~ 24V:1200ms, 30ms HOLD UP TIME(Typ.) 100ms at full load VOLTAGE RANGE 85 ~ 264VAC FREQUENCY RANGE 47 ~ 63Hz 79% 77% EFFICIENCY(Typ.) 74% AC CURRENT (Typ.) INRUSH CURRENT (Typ.) 0.4A/115VAC LEAKAGE CURRENT OVERLOAD PROTECTION OVER VOLTAGE OVER TEMPERATURE WORKING TEMP. WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION SAFETY STANDARDS WITHSTAND VOLTAGE SAFETY & ISOLATION RESISTANCE EMC EMI CONDUCTION & RADIATION (Note 4) HARMONIC CURRENT EMS IMMUNITY OTHERS 120 ~ 370VDC 77% 78% 0.2A/230VAC COLD START 40A/230VAC <0.5mA / 240VAC Above 105% rated output power Protection type : Hiccup mode, recovers automatically after fault condition is removed 5.75 ~ 6.75V 13.8 ~ 16.2V 17.25 ~ 20.25V 27.6 ~ 32.4V 55.2 ~ 64.8V Protection type : Shut off o/p voltage, clamping by zener diode Tj 140℃ typically (U1) detect on main control IC Protection type : Hiccup mode, recovers automatically after fault condition is removed -10 ~ +60℃ (Refer to output load derating curve) 20 ~ 90% RH non-condensing -20 ~ +85℃, 10 ~ 95% RH ±0.03%/℃ (0 ~ 50℃) 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes IEC60950-1 CB approved by TUV I/P-O/P:3KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25℃/ 70% RH Compliance to EN55032 (CISPR32) Class B Compliance to EN61000-3-2,-3 Compliance to EN61000-4-2,3,4,5,6,8,11, light industry level, criteria A MTBF 681.7K hrs min. DIMENSION 94*49*25mm (L*W*H) 0.083Kg; 120pcs/10.96Kg PACKING NOTE 48V:1200ms, 75ms at full load MIL-HDBK-217F (25℃) 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. The power supply is considered a component which will be installed into a final equipment. All the EMC tests are been executed by mounting the unit on a 360mm*360mm metal plate with 1mm of thickness. The final equipment must be re-confirmed that it still meets EMC directives. For guidance on how to perform these EMC tests, please refer to “EMI testing of component power supplies.” (as available on http://www.meanwell.com) File Name:PS-15-SPEC 2017-07-07 PDF
Документация на PS-15-5 

PS-15-20150806.cdr

Дата модификации: 05.07.2017

Размер: 67.3 Кб

2 стр.

PS-15 15W Single Output Switching Power Supply series Features : Universal AC input / Full range Low leakage current <0.5mA Protections: Short circuit/Over load /Over voltage/Over temperature Cooling by free air convection 100% full load burn-in test Fix switching frequency at 67KHz Low cost High reliability 2 years warranty SPECIFICATION MODEL OUTPUT INPUT PS-15-5 PS-15-12 PS-15-15 PS-15-24 DC VOLTAGE 5V 12V 15V 24V 48V RATED CURRENT 2.8A 1.25A 1A 0.625A 0.313A CURRENT RANGE 0 ~ 2.8A 0 ~ 1.25A 0 ~ 1A 0 ~ 0.625A 0 ~ 0.313A RATED POWER 14W 15W 15W 15W 15W 120mVp-p 120mVp-p 150mVp-p 200mVp-p RIPPLE & NOISE (max.) Note.2 100mVp-p VOLTAGE TOLERANCE Note.3 2.0% 2.0% 2.0% 2.0% 2.0% LINE REGULATION 1.0% 1.0% 1.0% 0.5% 0.5% LOAD REGULATION 1.0% 1.0% 1.0% 0.5% 0.5% SETUP, RISE TIME 5 ~ 24V:1200ms, 30ms HOLD UP TIME(Typ.) 100ms at full load VOLTAGE RANGE 85 ~ 264VAC FREQUENCY RANGE 47 ~ 63Hz EFFICIENCY(Typ.) 74% AC CURRENT (Typ.) INRUSH CURRENT (Typ.) 0.4A/115VAC LEAKAGE CURRENT OVER LOAD PROTECTION OVER VOLTAGE OVER TEMPERATURE WORKING TEMP. WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION SAFETY STANDARDS WITHSTAND VOLTAGE SAFETY & ISOLATION RESISTANCE EMC EMI CONDUCTION & RADIATION (Note 4) HARMONIC CURRENT OTHERS NOTE PS-15-48 48V:1200ms, 75ms at full load 120 ~ 370VDC 77% 78% 77% COLD START 40A/230VAC <0.5mA / 240VAC Above 105% rated output power Protection type : Hiccup mode, recovers automatically after fault condition is removed 5.75 ~ 6.75V 13.8 ~ 16.2V 17.25 ~ 20.25V 27.6 ~ 32.4V Tj 140 typically (U1) Detect on main control IC 55.2 ~ 64.8V Protection type : Hiccup mode, recovers automatically after fault condition is removed -10 ~ +60 (Refer to output load derating curve) 20 ~ 90% RH non-condensing -20 ~ +85 , 10 ~ 95% RH 0.03%/ (0 ~ 50 10 ~ 500Hz, 2G 10min./1cycle, Period for 60min.each along X, Y, Z axes EN60950-1 CB Approved by TUV I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC Compliance to EN55022 (CISPR22) Class B Compliance to EN61000-3-2,-3 EMS IMMUNITY Compliance to EN61000-4-2,3,4,5,6,8,11 Light industry level, criteria A DIMENSION 94*49*25mm (L*W*H) 0.083Kg; 120pcs/10.96Kg PACKING 79% 0.2A/230VAC 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. File Name:PS-15-SPEC 2006-04-13 PDF
Документация на серию PS-15 

PS-15.cdr

Дата модификации: 22.04.2006

Размер: 278.7 Кб

2 стр.

    Внимание! Точность указанного на сайте описания товара не может быть гарантирована. Для получения более полной и точной информации о товаре смотрите техническое описание (Datasheet) на сайте производителя.