PSP-600-27

MEAN WELL
AC/DC преобразователь: в кожухе; 600 Вт; выход 27В @ 22.2А; вход: 88...264VAC / 124...370VDC; -20...60°C
развернуть ▼ свернуть ▲
Фотография серии PSP-600
Чертеж серии PSP-600
 
 

Технические характеристики

показать свернуть
Выходная мощность (ном)
Выход
Напряжение 1 канала
Выходной ток 1 канала
Тип стабилизации
Вход
Конструктивное исполнение
  Возможности: ККМ, дистанционное Вкл/Выкл, компенсация на проводах, параллельное включение, сигнал DC OK
Типы защиты КЗ, перегрузка, перенапряжение, перегрев
Количество выходов
Тип управления выходом
Исполнение
Входное напряжение AC
Входное напряжение DC
Коэффициент мощности
Напряжение изоляции вход-выход
Напряжение изоляции вход-земля
Напряжение изоляции выход-земля
Применение
КПД
Шум
Размер 170×120×93 мм
Рабочая температура
Нашли ошибку? Выделите её курсором и нажмите CTRL + ENTER

Аналоги 5

показать свернуть
Тип Наименование Корпус Упаковка i P вых Выход U1 I1 Стабилизация Вход Конструктив Возможности Защита Выходов Управление IP U вх AC U вх DC Коэф. мощн. U изол вх-вых U изол вх-земля U изол вых-земля Применение КПД Шум T раб Примечание Карточка
товара
A+ RSP-750-27 (MW)
 
— в коробках 6 шт ККМ, регулируемый, 1U профиль, компенсация на проводах, дистанционное Вкл/Выкл, сигнал DC OK, дополнительный выход 12 В КЗ, перегрузка, перенапряжение, перегрев потенциометр внутренний, напряжение внешнее AC-DC Power Factor Correction Module
A+ SE-600-27 (MW)
 
— 1 шт AC-DC сетевой преобразователь - P вых: 600 Вт; Выход: 27 В; U1: 24...30 В; I1: до 22.2 ... КЗ, перегрузка, перенапряжение, перегрев —
A+ LRS-600-27 (MW)
 
— в коробках 4 шт КЗ, перегрев, перегрузка, перенапряжение — — — — —
A+ LOF550-20B27-C (MORNSUN)
 
—
 
 стандарт, ККМ, Remote Sense, выход Standby КЗ, перегрузка, перенапряжение, перегрев — Parameters with 25CFM cooling, some parameters may differ with Air Cooling, product with shell
A+ LM600-12B27 (MORNSUN)
 
—
 
 КЗ, перегрузка, перенапряжение — — — — — AC-DC Regulated Power Supply Module, 1 Output, 599.4W, Hybrid

Файлы 2

показать свернуть
PSP-600 600W with PFC and Parallel Function series User’s Manual ■ Features : Universal AC input / Full range Built-in active PFC function Protections: Short circuit / Overload / Over voltage / Over temperature Forced air cooling by built-in DC fan With DC OK Signal output Current sharing up to 2400W(3+1) Built-in remote ON-OFF control Built-in remote sense function Fixed switching frequency at PFC:88KHz PWM:100KHz Operating altitude up to 3000 meters (Note.6) 3 years warranty Bauar t gepruft Sicherheit egel ma ge od o s be wac g SPECIFICATION AS/NZS62368-1 MODEL OUTPUT FUNCTION UL62368-1 EN62368-1 GB4943.1 TPTC004 IEC62368-1 PSP-600-12 PSP-600-13.5 PSP-600-15 PSP-600-24 PSP-600-27 PSP-600-48 DC VOLTAGE 5V 12V 13.5V 15V 24V 27V 48V RATED CURRENT 80A 50A 44.5A 40A 25A 22.2A 12.5A CURRENT RANGE 0 ~ 80A 0 ~ 50A 0 ~ 44.5A 0 ~ 40A 0 ~ 25A 0 ~ 22.2A 0 ~ 12.5A RATED POWER 400W 600W 600.75W 600W 600W 599.4W 600W RIPPLE & NOISE (max.) Note.2 180mVp-p 240mVp-p 240mVp-p 240mVp-p 240mVp-p 240mVp-p 300mVp-p VOLTAGE ADJ. RANGE 10 ~ 13.2V ±1.0% 12 ~ 15V ±1.0% 13.5 ~ 18V ±1.0% 20 ~ 26.4V ±1.0% 24 ~ 30V ±1.0% 41 ~ 56V ±1.0% 4.75 ~ 5.5V VOLTAGE TOLERANCE Note.3 ±2.0% LINE REGULATION ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% LOAD REGULATION ±1.0% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% SETUP, RISE TIME 1500ms, 50ms at full load 85% 86% 86% 87% VOLTAGE RANGE PROTECTION CNS14336-1 www. tuv.com ID 2000000000 PSP-600-5 HOLD UP TIME (Typ.) INPUT R33100 RoHS 20ms at full load Note.5 88 ~ 264VAC 124 ~ 370VDC FREQUENCY RANGE 47 ~ 63Hz POWER FACTOR (Typ.) 0.95/230VAC EFFICIENCY(Typ.) 79% 84% AC CURRENT (Typ.) INRUSH CURRENT (Typ.) 6.8A/115VAC 20A/115VAC 3.4A/230VAC 40A/230VAC 0.99/115VAC at full load 85% LEAKAGE CURRENT <1.3mA/240VAC OVERLOAD 105 ~ 135% rated output power Protection type : Constant current limiting, recovers automatically after fault condition is removed OVER TEMPERATURE 5.75 ~ 6.75V 13.8 ~ 16.2V 15.5 ~ 18.2V 18 ~ 21V Protection type : Shut down o/p voltage, re-power on to recover Shut down o/p voltage, re-power on to recover REMOTE CONTROL POK SIGNAL WORKING TEMP. RC+/RC-: Short = power on ; Open = power off PSU turn on: 3.3V ~ 5.6V PSU turn off: 0V ~ 1V -20 ~ +60℃ (Refer to "Derating Curve") OVER VOLTAGE 27.6 ~ 32.4V 31 ~ 36.5V 57.6 ~ 67.2V WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION 20 ~ 90% RH non-condensing SAFETY STANDARDS WITHSTAND VOLTAGE SAFETY & ISOLATION RESISTANCE EMC (Note 4) EMC EMISSION UL62368-1, TUV EN62368-1, CCC GB4943.1 , BSMI CNS14336-1, AS/NZS 62368.1 , EAC TP TC 004 approved I/P-O/P:3KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC EMC IMMUNITY MTBF OTHERS NOTE DIMENSION PACKING -40 ~ +85℃, 10 ~ 95% RH non-condensing ±0.03%/℃ (0 ~ 50℃) 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25℃/ 70% RH Compliance to EN55032 (CISPR32) Class B, EN61000-3-2,-3, GB9245, GB17625.1, BSMI CNS13438, EAC TP TC 020 Compliance to EN61000-4-2,3,4,5,6,8,11, light industry level, criteria A, EAC TP TC 020 116.4K hrs min. MIL-HDBK-217F (25℃) 170*120*93mm (L*W*H) 1.9Kg; 8pcs/15.5Kg/1.06CUFT 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. The power supply is considered a component which will be installed into a final equipment. All the EMC tests are been executed by mounting the unit on a 360mm*360mm metal plate with 1mm of thickness. The final equipment must be re-confirmed that it still meets EMC directives. For guidance on how to perform these EMC tests, please refer to “EMI testing of component power supplies.” (as available on http://www.meanwell.com) 5. Derating may be needed under low input voltages. Please check the derating curve for more details. 6. The operating altitude is 2000 meters for CCC, 3000 meters for UL,TUV. The ambient temperature derating of 5℃/1000m is needed for operating altitude greater than 2000m (6500ft). ※ Product Liability Disclaimer：For detailed information, please refer to https://www.meanwell.com/serviceDisclaimer.aspx File Name:PSP-600-SPEC 2021-09-16 PDF
Документация на PSP-600-5 

PSP-600-20210915.cdr

Дата модификации: 28.09.2021

Размер: 134.7 Кб

3 стр.

PSP-600 600W with PFC and Parallel Function series Features : Universal AC input / Full range Built-in active PFC function Protections:Short circuit/Over load/Over voltage/Over temperature Forced air cooling by built-in DC fan With DC OK Signal output Current sharing up to 2400W(3+1) Built-in remote ON-OFF control Built-in remote sense function Fixed switching frequency at PFC:88KHz PWM:100KHz 3 years warranty SPECIFICATION MODEL OUTPUT PSP-600-5 PSP-600-12 PSP-600-13.5 PSP-600-15 PSP-600-24 PSP-600-27 PSP-600-48 DC VOLTAGE 5V 12V 13.5V 15V 24V 27V 48V RATED CURRENT 80A 50A 44.5A 40A 25A 22.2A 12.5A CURRENT RANGE 0 ~ 80A 0 ~ 50A 0 ~ 44.5A 0 ~ 40A 0 ~ 25A 0 ~ 22.2A 0 ~ 12.5A RATED POWER 400W 600W 600W 600W 600W 600W 600W RIPPLE & NOISE (max.) Note.2 180mVp-p 240mVp-p 240mVp-p 240mVp-p 240mVp-p 240mVp-p 300mVp-p VOLTAGE ADJ. RANGE 10 ~ 13.2V 1.0% 12 ~ 15V 1.0% 13.5 ~ 18V 1.0% 20 ~ 26.4V 1.0% 24 ~ 30V 1.0% 41 ~ 56V 1.0% 4.75 ~ 5.5V VOLTAGE TOLERANCE Note.3 2.0% LINE REGULATION 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% LOAD REGULATION 1.0% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 1500ms, 50ms at full load SETUP, RISE TIME 20ms at full load HOLD TIME (Typ.) VOLTAGE RANGE INPUT PROTECTION Note.5 88 ~ 264VAC 47 ~ 63Hz POWER FACTOR (Typ.) 0.95/230VAC 0.99/115VAC at full load EFFICIENCY(Typ.) 79% 84% AC CURRENT (Typ.) INRUSH CURRENT (Typ.) 6.8A/115VAC 20A/115VAC 3.4A/230VAC 40A/230VAC OVER VOLTAGE 5.75 ~ 6.75V 13.8 ~ 16.2V 15.5 ~ 18.2V 18 ~ 21V Protection type : Shut down o/p voltage, re-power on to recover (TSW1)Detect on heatsink of power transistor; 95 27.6 ~ 32.4V 31 ~ 36.5V 87% 57.6 ~ 67.2V (TSW51)Detect on heatsink of power diode OVER TEMPERATURE +12V ~ +48V: 85 (TSW1)Detect on heatsink of power transistor; 80 Protection type : Shut down o/p voltage, re-power on to recover REMOTE CONTROL POK SIGNAL WORKING TEMP. RC+/RC-: Short = power on ; Open = power off PSU turn on: 3.3V ~ 5.6V PSU turn off: 0V ~ 1V -20 ~ +60 (Refer to output load derating curve) (TSW51)Detect on heatsink of power diode 20 ~ 90% RH non-condensing -40 ~ +85 , 10 ~ 95% RH 0.03%/ (0 ~ 50 ) 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes UL60950-1, TUV EN60950-1 Approved I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC EMI CONDUCTION & RADIATION Compliance to EN55022 (CISPR22) Class B HARMONIC CURRENT Compliance to EN61000-3-2,-3 EMS IMMUNITY MTBF NOTE 86% OVER LOAD SAFETY & ISOLATION RESISTANCE OTHERS 86% <1.3mA/240VAC SAFETY STANDARDS WITHSTAND VOLTAGE (Note 4) 85% 105 ~ 135% rated output power Protection type : Constant current limiting, recovers automatically after fault condition is removed WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION EMC 85% LEAKAGE CURRENT +5V: 95 FUNCTION 124 ~ 370VDC FREQUENCY RANGE DIMENSION PACKING Compliance to EN61000-4-2,3,4,5,6,8,11; ENV50204, Light industry level, criteria A 116.4K hrs min. MIL-HDBK-217F (25 ) 170*120*93mm (L*W*H) 1.9Kg; 8pcs/15.5Kg/1.06CUFT 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. 5. Derating may be needed under low input voltages. Please check the derating curve for more details. File Name:PSP-600-SPEC 2006-10-17 PDF
Документация на серию PSP-600 

\\Fileserver-s\doc-control\do

Дата модификации: 09.11.2006

Размер: 385.9 Кб

3 стр.

    Внимание! Точность указанного на сайте описания товара не может быть гарантирована. Для получения более полной и точной информации о товаре смотрите техническое описание (Datasheet) на сайте производителя.

    AD-55A (MW)