RSD-200B-12

DC/DC преобразователи на шасси
развернуть ▼ свернуть ▲

Технические характеристики

показать свернуть
Монтаж
Выходная мощность
Количество каналов
Входное напряжение
Параметры выходов
Возможности
Комплекс защит короткого замыкания, перегрузки, перенапряжения, переполюсовки
Номинальное входное напряжение
Напряжение 1 выхода
Ток 1 выхода
КПД
Схема параллельного включения
Напряжение изоляции вход-выход
Напряжение изоляции вход-земля
Напряжение изоляции выход-земля
Сертификаты медицинские
Размер 191×86×40 мм
Рабочая температура
Нашли ошибку? Выделите её курсором и нажмите CTRL + ENTER

Аналоги 7

показать свернуть
Тип Наименование Корпус Упаковка i Монтаж P вых Каналов U вх Выход Возможности Защита U вх ном. U1 U2 U3 I1 I2 I3 Шум КПД Паралл. сх. Uиз. вх-вых Uиз. вх-общ Uиз. вых-общ Uиз. вых-вых Серт. медиц. T раб Примечания Карточка
товара
A- RSD-300B-12 (MW)
 
1 шт DC-DC модульный преобразователь - Монтаж: в кожухе; P вых: 270 Вт; #: 1; U вх: 16.8...3... короткого замыкания, перегрузки, перенапряжения, переполюсовки
A- RSD-200C-12 (MW)
 
1 шт DC-DC модульный преобразователь - Монтаж: в кожухе; P вых: 200 Вт; #: 1; U вх: 33.6...6... короткого замыкания, перегрузки, перенапряжения, переполюсовки
A- RSD-300C-12 (MW)
 
1 шт DC-DC модульный преобразователь - Монтаж: в кожухе; P вых: 300 Вт; #: 1; U вх: 33.6...6... короткого замыкания, перегрузки, перенапряжения, переполюсовки
A- RSD-300E-12 (MW)
 
1 шт короткого замыкания, перегрузки, перенапряжения, переполюсовки
A- SD-200B-12 (MW)
 
1 шт DC-DC модульный преобразователь - Монтаж: в кожухе; P вых: 200 Вт; #: 1; U вх: 19...36 ... короткого замыкания, перегрузки, перенапряжения, перегрева
A- URF4812QB-200WFR3 (MORNSUN)
 
1 шт
 
A- URF4812QB-200WR3 (MORNSUN)
 
15 шт

Файлы 2

показать свернуть
RSD-200 200W Railway Single Output DC-DC Converter ■ Features : Compliance to BS EN/EN50155 and BS EN/EN45545-2 railway standard 2:1 wide input range Protections: Short circuit / Overload / Over voltage / Over temperature series User’s Manual / Input reverse polarity 4000VDC I/O isolation Cooling by free air convection Half encapsulated Built-in constant current limiting circuit 1U low profile 40mm All using 105℃ long life electrolytic capacitors LED indicator for power on 100% full load burn-in test 3 years warranty SPECIFICATION UL62368-1 AS/NZS62368-1 TPTC004 IEC62368-1 MODEL OUTPUT RSD-200B-12 RSD-200B-24 RSD-200B-48 RSD-200C-12 RSD-200C-24 RSD-200C-48 RSD-200D-12 RSD-200D-24 RSD-200D-48 DC VOLTAGE 12V 24V 48V 12V 24V 48V 12V 24V 48V RATED CURRENT 16.7A 8.4A 4.2A 16.7A 8.4A 4.2A 16.7A 8.4A 4.2A CURRENT RANGE 0 ~ 16.7A 0 ~ 8.4A 0 ~ 4.2A 0 ~ 16.7A 0 ~ 8.4A 0 ~ 4.2A 0 ~ 16.7A 0 ~ 8.4A 0 ~ 4.2A RATED POWER 200.4W 201.6W 201.6W 200.4W 201.6W 201.6W 200.4W 201.6W 201.6W RIPPLE & NOISE (max.) Note.2 120mVp-p 150mVp-p 180mVp-p 120mVp-p 150mVp-p 180mVp-p 120mVp-p 150mVp-p 180mVp-p VOLTAGE TOLERANCE Note.3 ±2.0% ±2.0% ±2.0% ±2.0% ±2.0% ±2.0% ±2.0% ±2.0% ±2.0% LINE REGULATION ±0.2% ±0.2% ±0.5% ±0.2% ±0.2% ±0.5% ±0.2% ±0.2% ±0.5% LOAD REGULATION ±1.0% ±1.0% ±1.0% ±1.0% ±1.0% ±1.0% ±1.0% ±1.0% ±1.0% SETUP, RISE TIME 800ms, 50ms at full load HOLD UP TIME (Typ.) Please refer to page 3 Hold up Time( Load de-rating curve ) 16.8 ~ 31.2VDC 33.6 ~ 62.4VDC 1 SEC. EFFICIENCY (Typ.) 14.4 ~ 33.6VDC 28.8 ~ 67.2VDC 89% 89% 89% 91% 91% 91% 91% 91% 91% DC CURRENT (Typ.) INRUSH CURRENT (Typ.) 9.6A/24V 9.6A/24V 9.6A/24V 4.8A/48V 4.8A/48V 4.8A/48V 2.1A/110V 2.1A/110V 2.1A/110V VOLTAGE RANGE INPUT PROTECTION CONTINUOUS (Note 4) 105 ~ 135% rated output power Protection type : Constant current limiting, recovers automatically after fault condition is removed OVER VOLTAGE 13.8 ~ 16.2V 27.6 ~ 32.4V 55.2 ~ 64.8V 13.8 ~ 16.2V 27.6 ~ 32.4V 55.2 ~ 64.8V 13.8 ~ 16.2V 27.6 ~ 32.4V 55.2 ~ 64.8V OVER TEMPERATURE Protection type : Shut down o/p voltage, re-power on to recover Shut down o/p voltage, recovers automatically after temperature goes down WORKING TEMP. -40 ~ +55℃ (no derating) ; +70℃ @ 60% load by free air convection ; +70℃ no derating with external base plate, TX class compliance WORKING HUMIDITY 5 ~ 95% RH non-condensing -40 ~ +85℃ ± 0.03%/℃ (0 ~ 50℃ ) 10 ~ 500Hz, 5G 10min./1cycle, 60min. each along X, Y, Z axes ; Mounting : compliance to IEC61373 5000 meters UL 62368-1, IEC 62368-1, AS/NZS 62368-1, EAC TP TC 004 approved, Design refer to BS EN/EN62368-1 SAFETY STANDARDS WITHSTAND VOLTAGE I/P-O/P:4KVDC ISOLATION RESISTANCE EMC EMISSION I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25℃/ 70% RH Compliance to BS EN/EN55032 (CISPR32) Conduction Emission: Class A, Radiation Emission: Class B, EAC TP TC 020 EMC IMMUNITY Compliance to BS EN/EN61000-4-2,3,4,5,6,8, light industry level, criteria A, EAC TP TC 020 BS EN/EN50155 / IEC60571 including IEC61373 for shock & vibration, BS EN/EN50121-3-2 for EMC ;BS EN/EN45545-2 for fire protection I/P-FG:2.5KVDC O/P-FG:2.5KVDC MIL-HDBK-217F (25℃ ) MTBF 218.2K hrs min. DIMENSION 191*86*40mm (L*W*H) 0.94Kg; 12pcs/12.3Kg/0.73CUFT PACKING NOTE 45A/110VDC OVERLOAD RAILWAY STANDARD OTHERS 45A/48VDC 45A/24VDC EN50155:2007-B/C- type comply with S1 level @ full load, comply with S2 level @ 70% load ; D-type comply with S2 level @ full load EN50155:2017-Comply with S1 level OPERATING ALTITUDE EMC 57.6 ~ 154VDC INTERRUPTION OF VOLTAGE SUPPLY STORAGE TEMP. ENVIRONMENT TEMP. COEFFICIENT VIBRATION SAFETY & 67.2 ~ 143VDC 1. All parameters NOT specially mentioned are measured at 24,48,110VDC input, rated load and 25℃ of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. The power supply is considered a component which will be installed into a final equipment. All the EMC tests are been executed by mounting the unit on a 360mm*360mm metal plate with 1mm of thickness. The final equipment must be re-confirmed that it still meets EMC directives. For guidance on how to perform these EMC tests, please refer to “EMI testing of component power supplies.” (as available on http://www.meanwell.com) 5. Strongly recommended that external output capacitance should not exceed 5000uF. (Only for: RSD-200-12) 6. The ambient temperature derating of 3.5℃/1000m with fanless models and of 5℃/1000m with fan models for operating altitude higher than 2000m(6500ft). ※ Product Liability Disclaimer:For detailed information, please refer to https://www.meanwell.com/serviceDisclaimer.aspx File Name:RSD-200-SPEC 2021-09-15 PDF
Документация на RSD-200D-48 

RSD-200-20210915.cdr

Дата модификации: 15.09.2021

Размер: 313.6 Кб

7 стр.

RSD-200 200W Railway Single Output DC-DC Converter ¡ ¡½ E ¡E ¡E ¡E ¡E ¡E ¡¡E E ¡E ¡E ¡E ¡E series Features : Compliance to EN50155 railway standard 2:1 wide input range Protections: Short circuit / Overload / Over voltage / Over temperature / Input reverse polarity 4000VDC I/O isolation Cooling by free air convection Half encapsulated SPECIFICATION MODEL OUTPUT 12V 24V 48V 12V 24V 48V 12V 24V 48V 8.4A 4.2A 16.7A 8.4A 4.2A 16.7A 8.4A 4.2A CURRENT RANGE 0 ~ 16.7A 0 ~ 8.4A 0 ~ 4.2A 0 ~ 16.7A 0 ~ 8.4A 0 ~ 4.2A 0 ~ 16.7A 0 ~ 8.4A 0 ~ 4.2A RATED POWER 200.4W 201.6W 201.6W 200.4W 201.6W 201.6W 200.4W 201.6W 201.6W 150mVp-p 180mVp-p 120mVp-p 150mVp-p Ó¡ 2.0% ¡Ó0.5% Ó¡ 1.0% 180mVp-p 120mVp-p 150mVp-p Ó¡ 2.0% ¡Ó0.5% Ó¡ 1.0% RIPPLE & NOISE (max.) Note.2 120mVp-p VOLTAGE TOLERANCE Note.3 Ó¡ 2.0% ¡Ó0.2% Ó¡ 1.0% Ó¡ 2.0% ¡Ó0.5% Ó¡ 1.0% Ó¡ 2.0% ¡Ó0.2% Ó¡ 1.0% Ó¡ 2.0% ¡Ó0.2% Ó¡ 1.0% Ó¡ 2.0% ¡Ó0.2% Ó¡ 1.0% Ó¡ 2.0% ¡Ó0.2% Ó¡ 1.0% SETUP, RISE TIME 800ms, 50ms at full load B/C- type comply with S1 level @ full load, comply with S2 level @ 70% load ; D-type comply with S2 level @ full load 180mVp-p 16.8 ~ 31.2VDC 33.6 ~ 62.4VDC 1 SEC. EFFICIENCY (Typ.) 14.4 ~ 33.6VDC 28.8 ~ 67.2VDC 89% 89% 89% 91% 91% 91% 91% 91% 91% DC CURRENT (Typ.) INRUSH CURRENT (Typ.) 9.6A/24V 9.6A/24V 9.6A/24V 4.8A/48V 4.8A/48V 4.8A/48V 2.1A/110V 2.1A/110V 2.1A/110V CONTINUOUS OVER TEMPERATURE 57.6 ~ 154VDC 45A/110VDC 105 ~ 135% rated output power Protection type : Constant current limiting, recovers automatically after fault condition is removed 13.8 ~ 16.2V 27.6 ~ 32.4V 55.2 ~ 64.8V 13.8 ~ 16.2V 27.6 ~ 32.4V 55.2 ~ 64.8V 13.8 ~ 16.2V 27.6 ~ 32.4V 55.2 ~ 64.8V Protection type : Shut down o/p voltage, re-power on to recover 90 5 (TSW1) detect on main power transformer ¢J¡Ó ¢J Protection type : Shut down o/p voltage, recovers automatically after temperature goes down ¢J (no derating) ; +70¢J @ 60% load by free air convection ; +70¢J no derating with external base plate, TX class compliance -40 ~ +55 WORKING HUMIDITY 5 ~ 95% RH non-condensing SAFETY STANDARDS WITHSTAND VOLTAGE 67.2 ~ 143VDC 45A/48VDC 45A/24VDC WORKING TEMP. ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION ¢J ¡Ó0.03%/¢J (0 ~ 50¢J) -40 ~ +85 , 5 ~ 95% RH 10 ~ 500Hz, 5G 10min./1cycle, 60min. each along X, Y, Z axes ; Mounting : compliance to IEC61373 Meet IEC60950-1(LVD) I/P-O/P:4KVDC I/P-FG:2.5KVDC O/P-FG:2.5KVDC ¢J ISOLATION RESISTANCE EMC EMISSION I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25 / 70% RH Compliance to EN55022 (CISPR22) Conduction Emission: Class A, Radiation Emission: Class B EMC IMMUNITY Compliance to EN61000-4-2,3,4,5,6,8, light industry level, criteria A Meet EN50155 / IEC60571 including IEC61373 for shock & vibration, EN50121-3-2 for EMC RAILWAY STANDARD MTBF 218.2K hrs min. DIMENSION 191*86*40mm (L*W*H) 0.94Kg; 12pcs/12.3Kg/0.8CUFT PACKING NOTE Ó¡ 2.0% ¡Ó0.2% Ó¡ 1.0% HOLD UP TIME (Typ.) PROTECTION OVER VOLTAGE OTHERS 3 years warranty 16.7A OVERLOAD (Note 4) 100% full load burn-in test RATED CURRENT VOLTAGE RANGE EMC ¢J LED indicator for power on RSD-200B-12 RSD-200B-24 RSD-200B-48 RSD-200C-12 RSD-200C-24 RSD-200C-48 RSD-200D-12 RSD-200D-24 RSD-200D-48 LOAD REGULATION SAFETY & 1U low profile 40mm All using 105 long life electrolytic capacitors DC VOLTAGE LINE REGULATION INPUT Built-in constant current limiting circuit ¢J) MIL-HDBK-217F (25 ¢J 1. All parameters NOT specially mentioned are measured at 24,48,110VDC input, rated load and 25 of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. File Name:RSD-200-SPEC 2013-01-21 PDF
Документация на серию RSD-200 

RSD-200.cdr Keywords:

Дата модификации: 28.01.2013

Размер: 436.4 Кб

7 стр.

    Внимание! Точность указанного на сайте описания товара не может быть гарантирована. Для получения более полной и точной информации о товаре смотрите техническое описание (Datasheet) на сайте производителя.