RSP-1000-12

AC/DC преобразователь: В кожухе; 1000 Вт; Выход 12В/60А; Вход: 90...264VAC / 127...370VDC; -20...60°C
развернуть ▼ свернуть ▲
 
 

Технические характеристики

показать свернуть
Выходная мощность (ном)
Выход
Напряжение 1 канала
Выходной ток 1 канала
Тип стабилизации
Вход
Конструктивное исполнение
  Возможности: ККМ, регулируемый, 1U профиль, компенсация на проводах, параллельное включение, дистанционное Вкл/Выкл, сигнал DC OK, дополнительный выход 5 В
Типы защиты КЗ, перегрузка, перенапряжение, перегрев
Количество выходов
Тип управления выходом потенциометр внутренний, напряжение внешнее
Исполнение
Входное напряжение AC
Входное напряжение DC
Коэффициент мощности
Напряжение изоляции вход-выход
Напряжение изоляции вход-земля
Напряжение изоляции выход-земля
Применение
КПД
Шум
Размер 295×127×41 мм
Рабочая температура
Нашли ошибку? Выделите её курсором и нажмите CTRL + ENTER

Файлы 1

показать свернуть
RSP-1000 1000W Single Output Power Supply series Features : Universal AC input / Full range AC input active surge current limiting Built-in 5V/0.5A auxiliary power Built-in active PFC function, PF>0.95 Protections:Short circuit/Over load/Over voltage/Over temperature Output voltage can be trimmed between 40 ~ 110% of the rated output voltage Forced air cooling by built-in DC fan 3 High power density 10.7w/inch 1U low profile 41mm Active current sharing up to 4000W(3+1) (Note.8) DC OK Signal Built-in remote ON-OFF control Built-in remote sense function 3 years warranty .. SPECIFICATION MODEL RSP-1000-12 RSP-1000-15 RSP-1000-24 RSP-1000-27 RSP-1000-48 DC VOLTAGE 12V 15V 24V 27V 48V RATED CURRENT 60A 50A 40A 37A 21A CURRENT RANGE 0 ~ 60A 0 ~ 50A 0 ~ 40A 0 ~ 37A 0 ~ 21A RATED POWER 720W 750W 960W 999W 1008W 150mVp-p 150mVp-p 150mVp-p 150mVp-p 13.5 ~ 16.5V 20 ~ 26.4V 24 ~ 30V 43 ~ 55V RIPPLE & NOISE (max.) Note.2 150mVp-p OUTPUT 10 ~ 13.5V VOLTAGE ADJ. RANGE VOLTAGE TOLERANCE Note.3 1.0% 1.0% 1.0% 1.0% 1.0% LINE REGULATION 0.5% 0.5% 0.5% 0.5% 0.5% LOAD REGULATION 0.5% 0.5% 0.5% 0.5% 0.5% 300ms, 50ms at full load SETUP, RISE TIME 16ms/230VAC HOLD TIME (Typ.) VOLTAGE RANGE INPUT Note.5 90 ~ 264VAC FREQUENCY RANGE 47 ~ 63Hz POWER FACTOR (Typ.) 0.95/230VAC EFFICIENCY (Typ.) AC CURRENT (Typ.) INRUSH CURRENT (Typ.) 83% 12A/115VAC 25A/115VAC LEAKAGE CURRENT <2.0mA / 240VAC 16ms/115VAC at full load 127 ~ 370VDC 0.98/115VAC at full load 85% 88% 88% 90% 6A/230VAC 40A/230VAC 105 ~ 125% rated output power OVER LOAD PROTECTION OVER VOLTAGE OVER TEMPERATURE AUXILIARY POWER(AUX) Protection type : Constant current limiting, recovers automatically after fault condition is removed 13.8 ~ 16.8V 17 ~ 20.5V 27.6 ~ 32.4V 31 ~ 36.5V 56.6 ~ 66.2V Protection type : Shut down o/p voltage, re-power on to recover 5 (TSW1 ) Detect on heatsink of power transistor 85 5 (TSW2 ) Detect on heatsink of O/P diode; 75 Protection type : Shut down o/p voltage, recovers automatically after temperature goes down 5V @ 0.5A (+5%, -8%) Power off : open between on/off(pin6) & -S(pin2) on CN50 REMOTE ON/OFF CONTROL Note.6 Power on : short between on/off(pin6) & -S(pin2) on CN50 Open collector signal low when PSU turns on, Max. sink current :10mA FUNCTION DC OK SIGNAL OUTPUT VOLTAGE TRIM Note.6 Adjustment of output voltage is possible between 40 ~ 110% of rated output CURRENT SHARING(CS)Note.7 Please refer to function manual -20 ~ +60 (Refer to output load derating curve) WORKING TEMP. WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION SAFETY STANDARDS WITHSTAND VOLTAGE 20 ~ 90% RH non-condensing -40 ~ +85 , 10 ~ 95% RH 0.02%/ (0 ~ 50 ) 10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes UL60950-1, TUV EN60950-1 Approved I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC SAFETY & ISOLATION RESISTANCE EMI CONDUCTION & RADIATION Compliance to EN55022 (CISPR22) EMC (Note 4) HARMONIC CURRENT Compliance to EN61000-3-2,-3 EMS IMMUNITY MTBF OTHERS DIMENSION PACKING NOTE Compliance to EN61000-4-2,3,4,5,6,8,11; ENV50204, EN55024, EN61000-6-2, EN61204-3 Heavy industry level, criteria A 35K hrs min. MIL-HDBK-217F (25 295*127*41mm (L*W*H) 1.95Kg; 6pcs/12.7Kg/0.99CUFT ) 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. 5. Derating may be needed under low input voltages. Please check the derating curve for more details. 6. The power supply unit will have no output if the shorting connector is not assembled. It contains two shorting wires: one is from on/off(pin6) to -s(pin2) and the other is from Vco(pin8) to Vca(pin10). Please refter to function manual for details. 7. In parallel connection, maybe only one unit operate if the total output load is less than 5% of rated load condition. 8. Please consult MEAN WELL for applications of more units connecting in parallel. PDF
Документация на серию RSP-1000 

RSP-1000.cdr

Дата модификации: 04.12.2006

Размер: 284.2 Кб

6 стр.

    Внимание! Точность указанного на сайте описания товара не может быть гарантирована. Для получения более полной и точной информации о товаре смотрите техническое описание (Datasheet) на сайте производителя.