SE-1500-5

MEAN WELL
AC/DC преобразователь корпусированный
развернуть ▼ свернуть ▲
Фотография серии SE-1500
Чертеж серии SE-1500
 
 

Технические характеристики

показать свернуть
Выходная мощность (ном)
Выход
Напряжение 1 канала
Выходной ток 1 канала
Тип стабилизации
Вход
Конструктивное исполнение
Возможности дистанционное Вкл/Выкл, компенсация на проводах, сигнал DC OK
Типы защиты КЗ, перегрузка, перенапряжение, перегрев
Количество выходов
Тип управления выходом
Исполнение
Входное напряжение AC
Входное напряжение DC
Коэффициент мощности
Напряжение изоляции вход-выход
Напряжение изоляции вход-земля
Напряжение изоляции выход-земля
Применение
КПД
Шум
Размер 278×177.8×63.5 мм
Рабочая температура
Примечание AC-DC Regulated Power Supply Module, 1 Output, 1500W, Hybrid
Нашли ошибку? Выделите её курсором и нажмите CTRL + ENTER

Файлы 2

показать свернуть
SE-1500 1500W Single Output Power Supply ■ Features : series User’s Manual AC input 180 ~ 264VAC AC input active surge current limiting Protections: Short circuit / Overload / Over voltage / Over temperature Forced air cooling by built-in DC ball bearing fan High power density 7.8w/inch With DC OK signal output Built-in remote ON-OFF control Built-in remote sense function UL / CUL approved Low cost 2 years warranty 3 R33100 RoHS SPECIFICATION MODEL CNS14336-1 INPUT PROTECTION FUNCTION SE-1500-15 SE-1500-24 SE-1500-27 SE-1500-48 DC VOLTAGE 5V 12V 15V 24V 27V 48V RATED CURRENT 300A 125A 100A 62.5A 55.6A 31.3A CURRENT RANGE 0 ~ 300A 0 ~ 125A 0 ~ 100A 0 ~ 62.5A 0 ~ 55.6A 0 ~ 31.3A RATED POWER 1500W 1500W 1500W 1500W 1501.2W 1502.4W 150mVp-p 150mVp-p 150mVp-p 150mVp-p 150mVp-p VOLTAGE ADJ. RANGE 3.3 ~ 5.5V VOLTAGE TOLERANCE Note.3 ±2.0% 13.5 ~ 16.5V 21.6 ~ 26.4V 25 ~ 30V 43.2 ~ 56V ±1.0% ±1.0% ±1.0% ±1.0% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% LOAD REGULATION ±2.0% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% SETUP, RISE TIME 150ms, 12ms / 230VAC at full load HOLD UP TIME (Typ.) 26ms / 230VAC at full load VOLTAGE RANGE 180 ~ 264VAC FREQUENCY RANGE 47 ~ 63Hz EFFICIENCY (Typ.) 81% 17.5A / 230VAC 85% 87% 88% 89% 27.6 ~ 32.4V 31 ~ 35V 57.6 ~ 67.2V AC CURRENT (Typ.) INRUSH CURRENT (Typ.) 254 ~ 370VDC 85% 60A / 230VAC LEAKAGE CURRENT <3.5mA / 240VAC OVERLOAD 105 ~ 125% rated output power Protection type : Shut down o/p voltage, re-power on to recover OVER VOLTAGE 5.75 ~ 6.75V 14.5 ~ 16.2V 18 ~ 21V Protection type : Shut down o/p voltage, re-power on to recover OVER TEMPERATURE DC_OK SIGNAL Shut down o/p voltage, recovers automatically after temperature goes down REMOTE CONTROL WORKING TEMP. RC+/RC-: 0 ~ 0.8V power on; 4 ~ 10V power off -20 ~ +70℃ (Refer to "Derating Curve") WORKING HUMIDITY 20 ~ 90% RH non-condensing ISOLATION RESISTANCE EMC EMISSION SAFETY & EMC PSU turn on:3.3V ~ 5.6V PUS turn off:0 ~ 1V -40 ~ +85℃, 10 ~ 95% RH ±0.05%/℃ (0 ~ 50℃) 10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes UL62368-1 , BSMI CNS14336-1, EAC TP TC 004 approved; Design refer to BS EN/EN62368-1 I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25℃/ 70% RH Parameter Standard Test Level / Note Conducted BS EN/ EN55032 (CISPR32) Class B Radiated BS EN/ EN55032 (CISPR32) Class A Harmonic Current BS EN/ EN61000-3-2 ----- Voltage Flicker BS EN/ EN61000-3-3 ----- BS EN/ EN55024, BS EN/ EN61000-6-2 (Note 4) EMC IMMUNITY MTBF DIMENSION PACKING NOTE 10.8 ~ 13.5V ±1.0% LINE REGULATION ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION SAFETY STANDARDS WITHSTAND VOLTAGE OTHERS TPTC004 IEC62368-1 SE-1500-12 RIPPLE & NOISE (max.) Note.2 150mVp-p OUTPUT UL62368-1 SE-1500-5 Parameter Standard Test Level / Note ESD BS EN/ EN61000-4-2 Level 3, 8KV air ; Level 2, 4KV contact Radiated BS EN/ EN61000-4-3 Level 3 EFT / Burst BS EN/ EN61000-4-4 Level 3 Surge BS EN/ EN61000-6-2 2KV/Line-Line 4KV/Line-Earth Conducted BS EN/ EN61000-4-6 Level 3 Magnetic Field BS EN/ EN61000-4-8 Level 4 Voltage Dips and Interruptions BS EN/ EN61000-4-11 >95% dip 0.5 periods, 30% dip 25 periods, >95% interruptions 250 periods 333.3K hrs min. Telcordia SR-332 (Bellcore) ; 134.5K hrs min. 278*177.8*63.5mm (L*W*H) 3.3Kg; 4pcs/14.2Kg/1.14CUFT MIL-HDBK-217F (25℃) 1. 2. 3. 4. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. Tolerance : includes set up tolerance, line regulation and load regulation. The power supply is considered a component which will be installed into a final equipment. All the EMC tests are been executed by mounting the unit on a 720mm*360mm metal plate with 1mm of thickness. The final equipment must be re-confirmed that it still meets EMC directives. For guidance on how to perform these EMC tests, please refer to “EMI testing of component power supplies.” (as available on http://www.meanwell.com) 5. The ambient temperature derating of 3.5℃/1000m with fanless models and of 5℃/1000m with fan models for operating altitude higher than 2000m(6500ft). 6. This power supply does not meet the harmonic current requirements outlined by EN61000-3-2. Please do not use this power supply under the following conditions: a) the end-devices is used within the European Union, and b) the end-devices is connected to public mains supply with 220Vac or greater rated nominal voltage, and c) the power supply is: - installed in end-devices with average or continuous input power greater than 75W, or - belong to part of a lighting system Exception: Power supplies used within the following end-devices do not need to fulfill EN61000-3-2 a) professional equipment with a total rated input power greater than 1000W; b) symmetrically controlled heating elements with a rated power less than or equal to 200W ※ Product Liability Disclaimer：For detailed information, please refer to https://www.meanwell.com/serviceDisclaimer.aspx File Name:SE-1500-SPEC 2021-08-27 PDF
Документация на SE-1500-5 

SE-1500.cdr

Дата модификации: 24.08.2021

Размер: 109.8 Кб

3 стр.

SE-1500 1500W Single Output Power Supply series Features : AC input 180 ~ 264VAC AC input active surge current limiting Protections: Short circuit / Overload / Over voltage / Over temperature Forced air cooling by built-in DC ball bearing fan High power density 7.8w/inch3 With DC OK signal output Built-in remote ON-OFF control Built-in remote sense function UL / CUL approved Low cost 2 years warranty SPECIFICATION MODEL OUTPUT SE-1500-5 SE-1500-12 SE-1500-15 SE-1500-24 SE-1500-27 SE-1500-48 DC VOLTAGE 5V 12V 15V 24V 27V 48V RATED CURRENT 300A 125A 100A 62.5A 55.6A 31.3A CURRENT RANGE 0 ~ 300A 0 ~ 125A 0 ~ 100A 0 ~ 62.5A 0 ~ 55.6A 0 ~ 31.3A RATED POWER 1500W 1500W 1500W 1500W 1501.2W 1502.4W RIPPLE & NOISE (max.) Note.2 150mVp-p 150mVp-p 150mVp-p 150mVp-p 150mVp-p 150mVp-p VOLTAGE ADJ. RANGE 10.8 ~ 13.5V 13.5 ~ 16.5V 21.6 ~ 26.4V 25 ~ 30V 43.2 ~ 56V VOLTAGE TOLERANCE Note.3 INPUT 1.0% 1.0% 1.0% 0.5% 0.5% 0.5% 0.5% 0.5% LOAD REGULATION 2.0% 0.5% 0.5% 0.5% 0.5% 0.5% SETUP, RISE TIME 150ms, 12ms / 230VAC at full load HOLD UP TIME (Typ.) 26ms / 230VAC at full load VOLTAGE RANGE 180 ~ 264VAC FREQUENCY RANGE 47 ~ 63Hz EFFICIENCY (Typ.) 81% 17.5A / 230VAC AC CURRENT (Typ.) INRUSH CURRENT (Typ.) 254 ~ 370VDC 85% 85% 87% 88% 89% 27.6 ~ 32.4V 31 ~ 35V 57.6 ~ 67.2V 60A / 230VAC LEAKAGE CURRENT <3.5mA / 240VAC OVERLOAD 105 ~ 125% rated output power Protection type : Shut down o/p voltage, re-power on to recover 5.75 ~ 6.75V 14.5 ~ 16.2V 18 ~ 21V Protection type : Shut down o/p voltage, re-power on to recover OVER TEMPERATURE 95 5 (5V), 85 5 (12V,15V), 80 5 (24V), 75 5 (27V,48V) (TSW1) detect on heatsink of o/p diode Protection type : Shut down o/p voltage, recovers automatically after temperature goes down DC_OK SIGNAL PSU turn on:3.3V ~ 5.6V REMOTE CONTROL WORKING TEMP. RC+/RC-: 0 ~ 0.8V power on; 4 ~ 10V power off -20 ~ +70 (Refer to output load derating curve) WORKING HUMIDITY 20 ~ 90% RH non-condensing DIMENSION PACKING NOTE 1.0% 0.5% ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION SAFETY STANDARDS SAFETY & WITHSTAND VOLTAGE EMC ISOLATION RESISTANCE MTBF OTHERS 1.0% LINE REGULATION PROTECTION OVER VOLTAGE FUNCTION 3.3 ~ 5.5V 2.0% -40 ~ +85 PUS turn off:0 ~ 1V , 10 ~ 95% RH 0.05%/ (0 ~ 50 ) 10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes UL60950-1 approved I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25 134.5K hrs min. MIL-HDBK-217F (25 278*177.8*63.5mm (L*W*H) 3.3Kg; 4pcs/14.2Kg/1.14CUFT / 70% RH ) 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. File Name:SE-1500-SPEC 2009-03-03 PDF
Документация на серию SE-1500 

SE-1500.cdr

Дата модификации: 15.05.2009

Размер: 299.7 Кб

3 стр.

    Внимание! Точность указанного на сайте описания товара не может быть гарантирована. Для получения более полной и точной информации о товаре смотрите техническое описание (Datasheet) на сайте производителя.

    AD-155B (MW)