SPU02N-15

MEAN WELL
DC/DC преобразователи на печатную плату
развернуть ▼ свернуть ▲
Фотография серии SPU02

Технические характеристики

показать свернуть
Монтаж
Выходная мощность
Количество каналов
Входное напряжение
Параметры выходов
Возможности
Комплекс защит
Номинальное входное напряжение
Напряжение 1 выхода
Ток 1 выхода
КПД
Схема параллельного включения
Напряжение изоляции вход-выход
Сертификаты медицинские
Размер 19.6×7.1×10.2 мм
Рабочая температура
Нашли ошибку? Выделите её курсором и нажмите CTRL + ENTER

Аналоги 19

показать свернуть
Тип Наименование Корпус Упаковка i Монтаж P вых Каналов U вх Выход Возможности Защита U вх ном. U1 U2 U3 I1 I2 I3 Шум КПД Паралл. сх. Uиз. вх-вых Uиз. вх-общ Uиз. вых-общ Uиз. вых-вых Серт. медиц. T раб Примечания Карточка
товара
A- WRA2415S-3WR2 (MORNSUN)
 
SIP87 1 шт стандарт, функция Remote On/Off, изолированный — — — — — — — — —
A- F2415S-2WR2 (MORNSUN)
 
SIP76 1 шт — — — — — — — — — — —
A- E2415S-2WR2 (MORNSUN)
 
SIP76 в линейках 200 шт — — — — — — — — —
A- G2415S-2WR3 (MORNSUN)
 
SIP76 — — — — — — — —
A- SPUN02N-15 (MW)
 
— в линейках 10 шт
 
 — — — — — — — — — — — — — —
A- DCWN03B-15 (MW)
 
DIP2410 в линейках 100 шт короткого замыкания, перегрузки, перенапряжения — — — — — —
A- UWE1215S-3WR3 (MORNSUN)
 
SIP8 в линейках 100 шт
 
 — от пониженного входного напряжения, перегрузки, КЗ — — — — — — — — DC-DC Regulated Power Supply Module, 2 Output, 3W, Hybrid
A- UWF1215S-3WR3 (MORNSUN)
 
— в линейках 20 шт
 
 — от пониженного входного напряжения, перегрузки, КЗ — — — — — — — — — — DC-DC Regulated Power Supply Module, 1 Output, 3W, Hybrid
A- B2415M-2WR3 (MORNSUN)
 
SIP4 в линейках 97 шт — — — — — — — — — — —
A- B2415S-2WR3 (MORNSUN)
 
— 1 шт — — — — — — — — — — —
A- DPUN02N-15 (MW)
 
—
 
 — — — — — — — — — — — — — —
A- WRB2415P-3WR2 (MORNSUN)
 
— в линейках 30 шт — — — — — — — — — — —
A- WRB2415ZP-3WR2 (MORNSUN)
 
DIP-8 DIP7 1 шт стандарт, функция Remote On/Off, изолированный — — — — — — — — — EN55024, light industry level, criteria A —
A- WRF2415S-3WR2 (MORNSUN)
 
SIP87 в линейках 8 шт стандарт, функция Remote On/Off, изолированный — — — — — — — — — — —
A- QAW02 (MORNSUN)
 
— в линейках 12 шт — — — — — — — —
A- A2415S-2WR2 (MORNSUN)
 
SIP76 в линейках 12 шт — — — — — — — —
A- A2415S-2WR3 (MORNSUN)
 
— 1 шт — — — — — — — — —
A- G2415S-2WR2 (MORNSUN)
 
SIP76 в линейках 30 шт — — — — — — — — —
A- WRB2415S-3WR2 (MORNSUN)
 
SIP87 в линейках 6 шт стандарт, функция Remote On/Off, изолированный — — — — — — — — — — —

Файлы 3

показать свернуть
SPU02 2W DC-DC Unregulated Single Output Converter series ■ Features : 3000VDC I/O isolation Internal SMD technology Built-in EMI filter Protection: Short circuit Cooling by free air convection Non-conductive plastic case Single in line package 100% full load burn-in test Low cost / High reliability 2 years warranty SPECIFICATION ORDER NO. 5V CURRENT RANGE 80 ~ 400mA EFFICIENCY (Typ.) 77% RATED POWER 2W SPU02M-12 SPU02N-12 77% 80% SPU02M-15 SPU02N-15 15V 27 ~ 133mA 33 ~ 167mA 79% SPU02L-15 81% 80% 83% 81% 82% RIPPLE & NOISE (max.) Note.2 100mVp-p Note.3 ±1.2% for 1% input variation LOAD REGULATION Note.4 ±8.0% VOLTAGE ACCURACY ±2.0% SWITCHING FREQUENCY 100KHz min. VOLTAGE RANGE NORMAL VOLTAGE 4.5 ~ 5.5V 5V Full load 520mA No load 60mA 10.8 ~ 13.2V 21.6 ~ 26.4V 4.5 ~ 5.5V 5V 12V 24V 10.8 ~ 13.2V 21.6 ~ 26.4V 4.5 ~ 5.5V 5V 12V 24V 10.8 ~ 13.2V 21.6 ~ 26.4V 12V 24V 214mA 107mA 520mA 214mA 107mA 520mA 214mA 107mA 20mA 15mA 60mA 20mA 15mA 60mA 20mA 15mA FILTER Capacitor type PROTECTION Fuse recommended Momentary Protection type : Broken OVERLOAD PROTECTION Momentary SHORT CIRCUIT WORKING TEMP. Protection type : Broken -40 ~ +71℃ (Refer to "Derating Curve") WORKING HUMIDITY 20% ~ 90% RH non-condensing ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION WITHSTAND VOLTAGE ISOLATION RESISTANCE SAFETY & ISOLATION CAPACITANCE EMC EMC EMISSION EMC IMMUNITY MTBF OTHERS DIMENSION WEIGHT -40 ~ +105℃, 10 ~ 95% RH ±0.03% / ℃ (0 ~ 50℃) 10 ~ 500Hz, 2G 10min./1 cycle, period for 60min. each along X, Y, Z axes I/P-O/P:3KVDC I/P-O/P: 100M Ohms / 500VDC / 25℃/ 70% RH 80pF max. Compliance to EN55032 Class B, FCC part 15 Class B Compliance to EN61000-4-2,3,4,5,6,8, light industry level, criteria A 700khrs min. MIL-HDBK-217F(25℃) 19.6*7.1*10.2mm or 0.77"*0.28"*0.40" inch (L*W*H) 2.3g Unit: mm (inch) 10.14 (0.40) 19.6 (0.77) 3.81 (0.15) 1 2 FRONT VIEW 5.08 (0.20) 0.5 (0.02) 7.1 (0.28) 5 Derating Curve Pin Configuration Mechanical Specification 7 1.2 (0.05) NOTE SPU02L-12 12V LINE REGULATION INPUT CURRENT INPUT SPU02M-05 SPU02N-05 Pin No. Output 1 +Vin 2 5 -Vin -Vout 7 +Vout 100 LOAD (%) OUTPUT SPU02L-05 DC OUTPUT VOLTAGE 80 BOTTOM VIEW -40 0 25 50 60 71 100 Ta (℃) 1.All parameters are specified at normal input, rated load, 25℃ 70% RH ambient. 2.Ripple & noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1uf & 47uf capacitor. 3.Line regulation is measured from low line to high line at rated load. 4.Load regulation is measured from 20% to 100% rated load. File Name: SPU02-SPEC 2017-11-16 PDF
Документация на SPU02L-05 

SPU02.cdr

Дата модификации: 16.11.2017

Размер: 51.9 Кб

1 стр.

SPU02 2W DC-DC Unregulated Single Output Converter ¡ ¡½ E ¡E ¡E ¡E ¡E ¡E ¡E ¡E ¡E ¡ E series Features : 3000VDC I/O isolation Internal SMD technology Built-in EMI filter Protection: Short circuit Cooling by free air convection Non-conductive plastic case Single in line package 100% full load burn-in test Low cost / High reliability 2 years warranty SPECIFICATION ORDER NO. 5V 12V CURRENT RANGE 80 ~ 400mA 33 ~ 167mA EFFICIENCY (Typ.) 77% RATED POWER 2W 79% 77% 80% SPU02M-12 SPU02N-12 SPU02L-15 SPU02M-15 SPU02N-15 15V 27 ~ 133mA 81% 80% 83% 81% 82% RIPPLE & NOISE (max.) Note.2 100mVp-p LINE REGULATION Note.3 1.2% for 1% input variation ¡Ó Ó¡ Ó¡ 2.0% Note.4 8.0% VOLTAGE ACCURACY SWITCHING FREQUENCY 100KHz min. VOLTAGE RANGE NORMAL VOLTAGE 4.5 ~ 5.5V 5V Full load 520mA No load 60mA INPUT CURRENT 10.8 ~ 13.2V 21.6 ~ 26.4V 4.5 ~ 5.5V 5V 12V 24V 107mA 520mA 214mA 107mA 520mA 214mA 107mA 15mA 60mA 20mA 15mA 60mA 20mA 15mA Capacitor type Fuse recommended Momentary Protection type : Broken Momentary SHORT CIRCUIT WORKING TEMP. Protection type : Broken -40 ~ +71 (Refer to output load derating curve) WORKING HUMIDITY 20% ~ 90% RH non-condensing ¢J ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION WITHSTAND VOLTAGE ISOLATION RESISTANCE SAFETY & ISOLATION CAPACITANCE EMC EMC EMISSION EMC IMMUNITY MTBF OTHERS DIMENSION ¢J ¢J -40 ~ +105 , 10 ~ 95% RH 0.03% / (0 ~ 50 ) 10 ~ 500Hz, 2G 10min./1 cycle, period for 60min. each along X, Y, Z axes I/P-O/P:3KVDC I/P-O/P: 100M Ohms / 500VDC / 25 / 70% RH ¡Ó ¢J 80pF max. Compliance to EN55022 Class B, FCC part 15 Class B Compliance to EN61000-4-2,3,4,5,6,8, light industry level, criteria A ¢J 700khrs min. MIL-HDBK-217F(25 ) 19.6*7.1*10.2mm or 0.77"*0.28"*0.40" inch (L*W*H) Unit: mm (inch) 10.14 (0.40) 19.6 (0.77) 3.81 (0.15) FRONT VIEW 5.08 (0.20) 0.5 (0.02) 5 Derating Curve Pin Configuration Mechanical Specification 1 2 ¢J 2.3g WEIGHT 7.1 (0.28) 10.8 ~ 13.2V 21.6 ~ 26.4V 12V 24V 20mA PROTECTION OVERLOAD 10.8 ~ 13.2V 21.6 ~ 26.4V 4.5 ~ 5.5V 5V 12V 24V 214mA FILTER PROTECTION 7 Pin No. Output 1 +Vin 2 5 -Vin -Vout 7 +Vout 100 80 BOTTOM VIEW 1.2 (0.05) NOTE SPU02L-12 DC OUTPUT VOLTAGE LOAD REGULATION INPUT SPU02M-05 SPU02N-05 LOAD (%) OUTPUT SPU02L-05 -40 ¢J 0 25 50 60 71 100 Ta ( ¢J) 1.All parameters are specified at normal input, rated load, 25 70% RH ambient. 2.Ripple & noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1uf & 47uf capacitor. 3.Line regulation is measured from low line to high line at rated load. 4.Load regulation is measured from 20% to 100% rated load. File Name: SPU02-SPEC 2012-07-18 PDF
Документация на серию SPU02 

SPU02.cdr Keywords:

Дата модификации: 25.07.2012

Размер: 60.6 Кб

1 стр.

MEAN WELL SPU02N SERIES SWITCHING POWER SUPPLY ISO-9001 CERTIFIED MANUFACTURER .UNREGULATED DC OUTPUT .1000VDC I/O ISOLATION .INPUT FILTER:CAPACITOR TYPE .INTERNAL SMD TECHNOLOGY .NO EXTERNAL COMPONENTS REQUIRED .HIGH RELIABILITY / LOW COST .100% BURN-IN TEST .MTBF:700,000 HOURS ORDER NO. SPECIFICATION SPU02N-05 SPU02N-09 SPU02N-12 SPU02N-15 5V 9V 12V 15V DC OUTPUT VOLTAGE 2% OUTPUT VOLTAGE ACCURACY OUTPUT RATED CURRENT 400mA 222mA 167mA 133mA OUTPUT CURRENT RANGE 0-400mA 0-222mA 0-167mA 0-133mA RIPPLE & NOISE 100mVp-p (max.) LINE REGULATION 1.2% FOR 1% INPUT VARIATION LOAD REGULATION 8% @ 20%~FULL LOAD DC OUTPUT POWER 2W 2W 2W 2W EFFICIENCY 78% 78% 81% 83% SWITCHING FREQUENCY 100KHz min. INPUT VOLTAGE RANGE 24 10% (21.6~26.4VDC) INPUT CURRENT 107mA max. SHORT CIRCUIT PROTECTION MOMENTARY OVER VOLTAGE PROTECTION ---------- TEMP. COEFFICIENT 0.03% / ºC (0~50ºC) ISOLATION VOLTAGE I/P-O/P: 1 KVDC MIN. ISOLATION RESISTANCE I/P-O/P:500VDC / 100M Ohms MIN. ISOLATION CAPACITANCE 80pF max. WORKING TEMP., HUMIDITY -25ºC~+60ºC, 20%~90% RH (NO DERATING); 80% LOAD @ 71ºC STORAGE TEMP., HUMIDITY -40ºC~+105 ºC, 10%~95% RH DIMENSION 0.77 "*0.40 "*0.28 " WEIGHT 2.3g CASE METERIAL NON-CONDUCTIVE PLASTIC Pin no. SINGLE 1 +Vin 2 -Vin 4 -Vout MECHANISM AND PIN CONFIGURATION NOTE : 1.ALL PARAMETERS ARE SPECIFIED AT RATED INPUT, RATED LOAD, 25ºC 70% RH. AMBIENT. 2.RIPPLE & NOISE ARE MEASURED AT 20MHz BY USING A 12" TWISTED PAIR TERMINATED WITH A 0.1uF & 47uF CAPACITOR. 3.LINE REGULATION IS MEASURED FROM LOW LINE TO HIGH LINE AT RATED LOAD. 4.LOAD REGULATION IS MEASURED FROM 20% TO 100% RATED LOAD. 5 NP 6 +Vout 2003-03-25 PDF
Документация на SPU02N-15 

file://\\Mw2002\data\spec\外購產品\SPU02\SPU02N.PDF

Дата модификации: 23.06.2004

Размер: 19.5 Кб

1 стр.

    Внимание! Точность указанного на сайте описания товара не может быть гарантирована. Для получения более полной и точной информации о товаре смотрите техническое описание (Datasheet) на сайте производителя.

    SD-50A-12 (MW)