6TPB470M

Panasonic Industrial Europe GmbH
Конденсатор танталовый 6.3 В, 470 мкФ ±20%, корпус D4, SMD_7343-38, -55...105 °C
развернуть ▼ свернуть ▲
Внешний вид семейства POSCAP

Технические характеристики

показать свернуть
Ёмкость номинальная
Допуск по ёмкости
Напряжение номинальное
Эквивалентное последовательное сопротивление
Код корпуса производителя
Способ монтажа
Ток утечки
Температура рабочая
Размер 7.3×4.3×3.8 мм
  Примечание: Tantalum Capacitor, Polarized, Tantalum (solid Polymer), 6.3V, 20% +Tol, 20% -Tol, 470uF, Surface Mount, 2917
Нашли ошибку? Выделите её курсором и нажмите CTRL + ENTER

Аналоги 11

показать свернуть
Тип Наименование Корпус Упаковка i Ёмкость Допуск Напряжение ESR Код корпуса производителя Способ монтажа Шаг Ток утечки Срок службы Применение Температура рабочая Примечание Карточка
товара
P= 6THB470M (PAN)
 
— 2000 шт — — — Tantalum Capacitor, Polarized, Tantalum (solid Polymer), 6.3V, 20% +Tol, 20% -Tol, 470uF, Surface Mount, 2917
P- 6TPF470MFH (PAN)
 
— в ленте 2000 шт
 
 — — — — — — — — — — — —
P- 6TPE470MZ (PAN)
 
— в ленте 2000 шт
 
 — — — — — — — — — — — —
P- 6TPE470MW (PAN)
 
—
 
 — — — — — — — — — — — —
P- 6TPF470MAH (PAN)
 
TANT73434073X43X40MM 2000 шт — — — Tantalum Capacitor, Polarized, Tantalum (solid Polymer), 6.3V, 20% +Tol, 20% -Tol, 470uF, Surface Mount, 2917
P- 6TPE470MI (PAN)
 
— в ленте 2000 шт — — — Tantalum Capacitor, Polarized, Tantalum (solid Polymer), 6.3V, 20% +Tol, 20% -Tol, 470uF, Surface Mount, 2917
P- CA55-E6R3M477TE050 (XIANGYEE)
 
TANT73434373X43X43MM — — — —
F~ 6TPE470M (PAN)
 
— 2000 шт — — — Tantalum Capacitor, Polarized, Tantalum (solid Polymer), 6.3V, 20% +Tol, 20% -Tol, 470uF, Surface Mount, 2917
A+ 6TCE470M (PAN)
 
— 2000 шт — — — Tantalum Capacitor, Polarized, Tantalum (solid Polymer), 6.3V, 20% +Tol, 20% -Tol, 470uF, Surface Mount, 2917
A+ 6TCE470MI (PAN)
 
— 2000 шт — — — Tantalum Capacitor, Polarized, Tantalum (solid Polymer), 6.3V, 20% +Tol, 20% -Tol, 470uF, Surface Mount, 2917
A+ 6TCF470MAH (PAN)
 
— 2000 шт — — — Tantalum Capacitor, Polarized, Tantalum (solid Polymer), 6.3V, 20% +Tol, 20% -Tol, 470uF, Surface Mount, 2917

Файлы 3

показать свернуть
Conductive Polymer Tantalum Solid Capacitors Surface Mount Type Series : TPB Features ● Standard ● RoHS compliance, Halogen free Specifications Size code Category temperature range Rated voltage range Category voltage range Rated capacitance range Capacitance tolerance Leakage current Dissipation factor (tan d) Surge voltage (V.DC) Endurance Damp heat (Steady State) B2 D3L D4 –55 °C to +105 °C 4 V.DC to 10 V.DC 6.3 V.DC to 10 V.DC 4 V.DC to 10 V.DC 6.3 V.DC to 10 V.DC 33 μF to 68 μF 150 μF to 330 μF 220 μF to 470 μF ±20 % (120 Hz / + 20 °C) Please see the attached characteristics list Please see the attached characteristics list Rated voltage × 1.15 +105 °C 2000h, (B2 size : 1000h) rated voltage appled ✽ Rated temp. +85 °C 1000h rated voltage applied Capacitance change Within ±20 % of the initial value tan d < 1.5 times of the initial limit DC leakage current Within the initial limit +60 °C, 90 % to 95 %, 500 h, No-applied voltage Capacitance change Within +40 %, −20 % of the initial value tan d < 1.5 times of the initial limit DC leakage current < 3 times of the initial limit Marking Dimensions (not to scale) B2 Size L D4 Size Polarity marking(+) R.Cap. code R. Voltage code Lot. No. R. Voltage code Lot. No. H W Polarity marking(+) R.Cap. code S D3L Size R. Voltage (V.DC) 4.0 g Code Polarity marking(+) R.Cap. code 6.3 10.0 j Size code L±0.3 B2 3.5 D3L 7.3 D4 7.3 A B2 Size R. Voltage code R. Cap. (μF) 33 N7 Code Lot. No. 47 68 S7 W7 ✽1 W1 S W±0.2 2.8 4.3 4.3 H±0.2 1.9 2.8 3.8 ✽2 S±0.2 0.8 1.3 1.3 Unit : mm W1±0.1 2.2 2.4 2.4 ✽ Externals of figure are the reference. ✽ 1 ±0.2 : B2 ✽ 2 ±0.1 : B2 Characteristics list Series (V.DC)Rated2.0Category 2.5 4.0 Rated Category Rated voltage temp. voltage temp. capacitance d e g (V.DC) (°C) (V.DC) (°C) (μF) 4.0 6.3 TPB 10 105 105 105 105 105 85 105 105 105 105 105 105 105 105 105 4.0 4.0 6.3 6.3 6.3 5.0 6.3 6.3 6.3 10.0 10.0 10.0 10.0 10.0 10.0 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 68 330 33 68 220 330 470 33 47 150 220 330 Case size (mm) 6.3 10.0 Size Ripple ✽1 code current A L j W H 3.5 7.3 3.5 3.5 7.3 7.3 7.3 7.3 7.3 3.5 3.5 7.3 7.3 7.3 7.3 2.8 4.3 2.8 2.8 4.3 4.3 4.3 4.3 4.3 2.8 2.8 4.3 4.3 4.3 4.3 1.9 2.8 1.9 1.9 2.8 2.8 2.8 3.8 3.8 1.9 1.9 2.8 2.8 3.8 3.8 B2 D3L B2 D3L D4 B2 D3L D4 (mAr.m.s.) 1100 2000 1100 1100 2000 2000 2000 3000 3000 1100 1100 2000 2000 3000 3000 Specifications ✽2 ESR tan d ✽3 (mΩ max.) 70 40 70 70 40 40 40 40 35 70 70 40 40 40 35 0.08 0.10 0.08 0.08 0.10 0.10 0.10 0.10 0.15 0.08 0.08 0.10 0.10 0.10 0.10 Standard ✽4 LC (μA) Part number 27.2 132.0 20.7 42.8 138.6 207.9 207.9 207.9 296.1 33.0 47.0 150.0 220.0 220.0 330.0 4TPB68M 4TPB330ML 6TPB33M 6TPB68M 6TPB220ML 6TPB330MAL 6TPB330ML 6TPB330M 6TPB470M 10TPB33M 10TPB47M 10TPB150ML 10TPB220ML 10TPB220M 10TPB330M Min. Packaging Q'ty (pcs) 2000 2500 2000 2000 2500 2500 2500 2000 2000 2000 2000 2500 2500 2000 2000 Floor life Reflow Reflow Temp Temp < 260°C < 250°C 3 2a 3 3 2a 3 – 3 – 2a ✽1 Ripple current (100 kHz/ +45 °C ), ✽2 ESR (100 kHz/+20 °C) ✽3 tan d (120 Hz/+20 °C) ✽4 After 5 minutes ◆ Please refer to each page in this catarog for “Reflow conditions” and “Taping specifications”. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 02 Jun. 2018 PDF
Документация на серию TPB_POSSCAP 

Series catalog

Дата модификации: 27.03.2019

Размер: 416.6 Кб

2 стр.

2018 Products Catalog Conductive Polymer Tantalum Solid Capacitors PDF
Документация на семейство POSCAP 

Products catalog

Дата модификации: 18.12.2018

Размер: 2.13 Мб

34 стр.

Conductive Polymer Tantalum Solid Capacitors Surface Mount Type Series : TPB Features ● Standard ● RoHS compliance, Halogen free Specifications Size code Category temperature range Rated voltage range Category voltage range Rated capacitance range Capacitance tolerance Leakage current Dissipation factor (tan d) Surge voltage (V.DC) Endurance Damp heat (Steady State) B2 D3L D4 –55 °C to +105 °C 4 V.DC to 10 V.DC 6.3 V.DC to 10 V.DC 4 V.DC to 10 V.DC 6.3 V.DC to 10 V.DC 33 μF to 68 μF 150 μF to 330 μF 220 μF to 470 μF ±20 % (120 Hz / + 20 °C) Please see the attached characteristics list Please see the attached characteristics list Rated voltage × 1.15 +105 °C 2000h, (B2 size : 1000h) rated voltage appled ✽ Rated temp. +85 °C 1000h rated voltage applied Capacitance change Within ±20 % of the initial value tan d < 1.5 times of the initial limit DC leakage current Within the initial limit +60 °C, 90 % to 95 %, 500 h, No-applied voltage Capacitance change Within +40 %, −20 % of the initial value tan d < 1.5 times of the initial limit DC leakage current < 3 times of the initial limit Marking Dimensions (not to scale) B2 Size L D4 Size Polarity marking(+) R.Cap. code R. Voltage code Lot. No. R. Voltage code Lot. No. H W Polarity marking(+) R.Cap. code S D3L Size R. Voltage (V.DC) 4.0 g Code Polarity marking(+) R.Cap. code 6.3 10.0 j Size code L±0.3 B2 3.5 D3L 7.3 D4 7.3 A B2 Size R. Cap. (μF) 33 N7 Code Lot. No. R. Voltage code 47 68 S7 W7 ✽1 W1 S W±0.2 2.8 4.3 4.3 H±0.2 1.9 2.8 3.8 ✽2 Unit : mm S±0.2 0.8 1.3 1.3 W1±0.1 2.2 2.4 2.4 ✽ Externals of figure are the reference. ✽ 1 ±0.2 : B2 ✽ 2 ±0.1 : B2 Characteristics list size (mm) (V.DC) Rated 2.0 Category 2.5Category4.0 Rated 6.3Case10.0 Rated d voltagee temp. gcapacitance j A Series voltage temp. L W H (V.DC) (°C) (V.DC) (°C) (μF) 4.0 6.3 TPB 10 105 105 105 105 85 105 105 105 105 105 105 105 105 105 4.0 4.0 6.3 6.3 5.0 6.3 6.3 6.3 10.0 10.0 10.0 10.0 10.0 10.0 105 105 105 105 105 105 105 105 105 105 105 105 105 105 68 330 68 220 330 470 33 47 150 220 330 3.5 7.3 3.5 7.3 7.3 7.3 7.3 7.3 3.5 3.5 7.3 7.3 7.3 7.3 2.8 4.3 2.8 4.3 4.3 4.3 4.3 4.3 2.8 2.8 4.3 4.3 4.3 4.3 1.9 2.8 1.9 2.8 2.8 2.8 3.8 3.8 1.9 1.9 2.8 2.8 3.8 3.8 Specifications Size Ripple ✽1 ✽2 code current ESR tan d ✽3 (mΩ max.) (mAr.m.s.) B2 D3L B2 D3L D4 B2 D3L D4 1100 2000 1100 2000 2000 2000 3000 3000 1100 1100 2000 2000 3000 3000 70 40 70 40 40 40 40 35 70 70 40 40 40 35 0.08 0.10 0.08 0.10 0.10 0.10 0.10 0.15 0.08 0.08 0.10 0.10 0.10 0.10 Standard LC (μA) Part number Min. Packaging Q'ty (pcs) 27.2 132.0 42.8 138.6 207.9 207.9 207.9 296.1 33.0 47.0 150.0 220.0 220.0 330.0 4TPB68M 4TPB330ML 6TPB68M 6TPB220ML 6TPB330MAL 6TPB330ML 6TPB330M 6TPB470M 10TPB33M 10TPB47M 10TPB150ML 10TPB220ML 10TPB220M 10TPB330M 2000 2500 2000 2500 2500 2500 2000 2000 2000 2000 2500 2500 2000 2000 ✽4 ✽1 Ripple current (100 kHz/ +45 °C ), ✽2 ESR (100 kHz/+20 °C) ✽3 tan d (120 Hz/+20 °C) ✽4 After 5 minutes ◆ Please refer to each page in this catarog for “Reflow conditions” and “Taping specifications”. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 01 Nov. 2015 PDF
Документация на 6TPB330M 

N_POSCAP_Contents_e.indd

Дата модификации: 20.11.2015

Размер: 51.6 Кб

1 стр.

    Публикации 0

    показать свернуть

    Внимание! Точность указанного на сайте описания товара не может быть гарантирована. Для получения более полной и точной информации о товаре смотрите техническое описание (Datasheet) на сайте производителя.

    10TPB330M (PAN)