EEEFC1C681P

Конденсатор алюминиевый 16 В x 680 мкФ ±20%, SMD, -40...105 °C, 1000 ч
развернуть ▼ свернуть ▲

Технические характеристики

показать свернуть
Ёмкость номинальная
Допуск по ёмкости
Напряжение номинальное
Температура рабочая
Срок службы
Диаметр корпуса
Высота корпуса
Способ монтажа
Ток пульсаций низких частот
Диаметр x Высота 10×10×10 мм
  Примечание: Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 16V, 20% +Tol, 20% -Tol, 680uF, Surface Mount, 3939
Нашли ошибку? Выделите её курсором и нажмите CTRL + ENTER

Аналоги 24

показать свернуть
Тип Наименование Корпус Упаковка i Ёмкость Допуск Напряжение Температура рабочая Срок службы Диаметр Высота Способ монтажа Шаг ESR Импеданс Ток пульсаций НЧ Ток пульсаций ВЧ Применение Примечание Карточка
товара
P= EEEFC1C681AP (PAN)
 
500 шт Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 16V, 20% +Tol, 20% -Tol, 680uF, Surface Mount, 3939
A+ EEEFT1C681AV (PAN)
 
500 шт Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 16V, 20% +Tol, 20% -Tol, 680uF, Surface Mount, 3333
A+ EEEFN1C681UP (PAN)
 
в ленте 500 шт V-FN, 16V, 680uF, 105°C, 2000h, 8x10.2mm, ripple 600mArms, 0.16Ohm
A+ CDL016M681G10PKKKV00R (SUSCON)
 
в ленте 500 шт
A+ EEEFP1C681AP (PAN)
 
в ленте 500 шт Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 16V, 20% +Tol, 20% -Tol, 680uF, Surface Mount, 4141
A+ 20SVPK680M (PAN)
 
400 шт Miniaturised High Voltage, Temp and Capacitance, RoHs compliance, Halogen free
A+ EEH-ZS1E681UP (PAN)
 
 
A+ EEEHAC681UAP (PAN)
 
500 шт Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 16V, 20% +Tol, 20% -Tol, 680uF, Surface Mount, 4141
A+ EEEFK1C681AP (PAN)
 
500 шт Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 16V, 20% +Tol, 20% -Tol, 680uF, Surface Mount, 4141
A+ EEEFK1C681GP (PAN)
 
в ленте 500 шт Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 16V, 20% +Tol, 20% -Tol, 680uF, Surface Mount, 4141
A+ EEEFT1C681AP (PAN)
 
500 шт Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 16V, 20% +Tol, 20% -Tol, 680uF, Surface Mount, 3333
A+ EEEFT1C681GP (PAN)
 
500 шт Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 16V, 20% +Tol, 20% -Tol, 680uF, Surface Mount, 3333
A+ EEVTG1C681Q (PAN)
 
200 шт Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 16V, 20% +Tol, 20% -Tol, 680uF, Surface Mount, 5353
A+ EEEFK1C681P (PAN)
 
в ленте 500 шт Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 16V, 20% +Tol, 20% -Tol, 680uF, Surface Mount, 4141
A+ EEETK1E681AM (PAN)
 
125 шт Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 25V, 20% +Tol, 20% -Tol, 680uF, Surface Mount, 6767
A+ EEEFN1E681UP (PAN)
 
500 шт V-FN, 25V, 680uF, 105°C, 2000h, 10x10.2mm, ripple 850mArms, 0.08Ohm
A+ EEEFN1E681UV (PAN)
 
в ленте 500 шт V-FN, Vibration proof, 25V, 680uF, 105°C, 2000h, 10x10.2mm, ripple 850mArms, 0.08Ohm
A+ EEEFK1E681SP (PAN)
 
500 шт Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 25V, 20% +Tol, 20% -Tol, 680uF, Surface Mount, 4141
A+ EEETKE681UAQ (PAN)
 
200 шт Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 25V, 20% +Tol, 20% -Tol, 680uF, Surface Mount, 5353
A+ EEEFH1C681L (PAN)
 
500 шт
 
V-FH / 16V / 680uF / 105°C / 10000h / 10x10.2mm / ripple 850mArms / ESR 0.15Ohm
A+ 16SVPG680M (PAN)
 
 
Super Low ESR / High ripple current
A+ EEEHA1C681P (PAN)
 
500 шт Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 16V, 20% +Tol, 20% -Tol, 680uF, Surface Mount, 4141
A+ 16SVPK680M (PAN)
 
400 шт Miniaturised High Voltage, Temp and Capacitance, RoHs compliance, Halogen free
A+ EEVTG1E681M (PAN)
 
125 шт Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 25V, 20% +Tol, 20% -Tol, 680uF, Surface Mount, 6767

Файлы 2

показать свернуть
Aluminum Electrolytic Capacitors Low impedance Surface Mount Type FC series FC HA Features ● ● ● ● ● Endurance : 105 ℃ 1000 h Low impedance (1/2 for HA series) Vibration-proof product (30G guaranteed) is available upon request (ø8 ≦) AEC-Q200 compliant RoHS compliant Specifications Category temp. range Rated voltage range Capacitance range Capacitance tolerance Leakage current –40 ℃ to +105 ℃ 6.3 V to 50 V 1 μF to 1500 μF ±20 % (120 Hz / +20℃) I ≦ 0.01 CV or 3 (μA) After 2 minutes (Whichever is greater) Dissipation factor (tan δ) Please see the attached characteristics list Rated voltage(V) 6.3 10 16 25 35 50 Characteristics Z (-25 ℃) / Z (+20 ℃) 2 2 2 2 2 2 (Impedance ratio at 120 Hz) at low temperature Z (-40 ℃) / Z (+20 ℃) 3 3 3 3 3 3 After applying rated working voltage for 1000 hours at +105 ℃ ± 2 ℃ and then being stabilized at +20 ℃, capacitors shall meet the following limits. Capacitance change Within ±20 % of the initial value Endurance Dissipation factor (tan δ) ≦ 200 % of the initial limit DC leakege current Within the initial limit After storage for 1000 hours at +105 ℃ ± 2 ℃ with no voltage applied and then being Shelf life stabilized at +20 ℃, capacitors shall meet the limits specified in endurance. (With voltage treatment) After reflow soldering and then being stabilized at +20 ℃, capacitors shall meet the following limits. Resistance to Capacitance change Within ±10 % of the initial value soldering heat Dissipation factor (tan δ) Within the initial limit DC leakege current Within the initial limit Frequency correction factor for ripple current Frequency (Hz) Correction factor 50, 60 0.70 120 0.75 0.3 max. (P) K B±0.2 Capacitance (μF) Rated voltage code Lot number R.voltage code Unit:V E V H 25 35 50 W L Mark for Lead-Free Pressure Relief(ø10 and larger) Size code øD B 4.0 L 5.4 +0.1 -0.2 +0.1 -0.2 +0.1 -0.2 C 5.0 5.4 D 6.3 5.4 E 8.0 6.2±0.3 8.0 10.2±0.3 F G 10.0 10.2±0.3 (I) Series identification products (Black dot) 6.3 10 16 A±0.2 H øD±0.5 Negative polarity marking (–) j A C 100 k to 1.00 Dimensions Example : 6.3 V 22 μF Marking color : BLACK 22 j FC 10 k ~ 0.95 (I) Marking 1k 0.90 ( )Reference size H I W 4.3 5.5 max. 1.8 0.65±0.1 1.0 0.35 5.3 6.5 max. 2.2 0.65±0.1 1.5 0.35 6.6 7.8 max. 2.6 0.65±0.1 1.8 0.35 8.3 9.5 max. 3.4 0.65±0.1 2.2 0.35 8.3 10.0 max. 3.4 0.90±0.2 3.1 0.70±0.2 10 0.90±0.2 4.6 0.70±0.2 12.0 max. 3.5 P Unit:mm A, B K +0.15 -0.20 +0.15 -0.20 +0.15 -0.20 +0.15 -0.20 ・The dimensions of the vibration-proof products, please refer to the page of the mounting specification. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 06-Dec-19 PDF
Документация на EEEFC0J101P 

Series catalog

Дата модификации: 24.09.2021

Размер: 618.4 Кб

10 стр.

Aluminum Electrolytic Capacitors (SMD Type) Surface Mount Type Series : FC Type : V Low impedance FC ↑ HA Features ● Endurance : 105 °C 1000 h ● Low impedance (1/2 for HA series) ● Vibration-proof product is available ● RoHS compliant upon request. (08 mm and larger) Specifications Category temperature range Rated voltage range Capacitance range Capacitance tolerance Leakage current Dissipation factor (tan d) Characteristics at low temperature Endurance Shelf life Resistance to soldering heat AEC-Q200 –40 °C to +105 °C 6.3 V.DC to 50 V.DC 1 µF to 1500 µF ±20 % (120 Hz/+20 °C) I < 0.01 CV or 3 (µA) After 2 minutes (Whichever is greater) Please see the attached characteristics list V.DC 6.3 10 16 25 35 50 Z(–25 °C) / Z(+20 °C) 2 2 2 2 2 2 (Impedance ratio at 120 Hz) Z(–40 °C) / Z(+20 °C) 3 3 3 3 3 3 After applying rated working voltage for 1000 hours at +105 °C±2 °C and then being stabilized at +20 °C, Capacitors shall meet the following limits. Capacitance change Within ±20 % of the initial value < 200 % of the initial limit tan d DC leakage current Within the initial limit After storage for 1000 hours at +105 °C±2 °C with no voltage applied and then being stabilized at +20 °C, capacitors shall meet the limits specified in Endurance.(With voltage treatment) After reflow soldering and then being stabilized at +20 °C, capacitor shall meet the following limits. Capacitance change Within ±10 % of the initial value tan d Within the initial limit DC leakage current Within the initial limit AEC-Q200 compliant Frequency correction factor for ripple current Frequency (Hz) 50, 60 120 1k 10 k 100 k to Correction factor 0.70 0.75 0.90 0.95 1.00 22 j FC Capacitance (µF) L Series identification Mark for Lead-Free products (Black dot) Rated voltage code (P) W Pressure Relief (010 and larger) ( ) Reference size (Unit : mm) Lot number R. Voltage 6.3 (V.DC) Code j + (I) Negative polarity marking (–) A±0.2 – H 0D±0.5 0.3 max. K Example : 6.3 V.DC 22 µF Marking color : BLACK (I) Dimensions B±0.2 Marking 10 16 25 35 50 A C E V H Size L A, B H code 0D + 0.1 4.3 5.5 max. B 4.0 5.4 - 0.2 C 5.0 5.4 +- 0.1 5.3 6.5 max. 0.2 D 6.3 5.4 +- 0.1 6.6 7.8 max. 0.2 E 8.0 6.2±0.3 8.3 9.5 max. F 8.0 10.2±0.3 8.3 10.0 max. G 10.0 10.2±0.3 10.3 12.0 max. I W P K 1.8 2.2 2.6 3.4 3.4 3.5 0.65±0.1 0.65±0.1 0.65±0.1 0.65±0.1 0.90±0.2 0.90±0.2 1.0 1.5 1.8 2.2 3.1 4.6 0.35+- 0.15 0.20 0.35+- 0.15 0.20 0.35+- 0.15 0.20 0.35+- 0.15 0.20 0.70±0.2 0.70±0.2 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 02 Mar. 2016 PDF
Документация на серию FC_SMD 

N_AEC_V-FC_E.indd

Дата модификации: 27.03.2019

Размер: 83.3 Кб

3 стр.

    Внимание! Точность указанного на сайте описания товара не может быть гарантирована. Для получения более полной и точной информации о товаре смотрите техническое описание (Datasheet) на сайте производителя.