EEEFK1C102SL

Конденсатор алюминиевый 16 В x 1000 мкФ ±20%, SMD, -55...105 °C
развернуть ▼ свернуть ▲

Технические характеристики

показать свернуть
Ёмкость номинальная
Допуск по ёмкости
Напряжение номинальное
Температура рабочая
Диаметр корпуса
Высота корпуса
Способ монтажа
Эквивалентное последовательное сопротивление
Ток пульсаций низких частот
Диаметр x Высота 10×10×10.3 мм
  Примечание: Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 16V, 20% +Tol, 20% -Tol, 1000uF, Surface Mount, 4141
Нашли ошибку? Выделите её курсором и нажмите CTRL + ENTER

Аналоги 28

показать свернуть
Тип Наименование Корпус Упаковка i Ёмкость Допуск Напряжение Температура рабочая Срок службы Диаметр Высота Способ монтажа Шаг ESR Импеданс Ток пульсаций НЧ Ток пульсаций ВЧ Применение Примечание Карточка
товара
P- EEEFT1C102AP (PAN)
 
в ленте 500 шт Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 16V, 20% +Tol, 20% -Tol, 1000uF, Surface Mount, 4141
P- EEEFN1C102UP (PAN)
 
500 шт V-FN, 16V, 1000uF, 105°C, 2000h, 10x10.2mm, ripple 850mArms, 0.08Ohm
P- EEEFT1C102AL (PAN)
 
 
Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 16V, 20% +Tol, 20% -Tol, 1000uF, Surface Mount, 4141
P- EEEFN1C102UL (PAN)
 
Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 16V, 20% +Tol, 20% -Tol, 1000uF, Surface Mount, 4141
P- EEEFK1C102SP (PAN)
 
500 шт Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 16V, 20% +Tol, 20% -Tol, 1000uF, Surface Mount, 4141
P- EEEFT1C102GP (PAN)
 
500 шт Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 16V, 20% +Tol, 20% -Tol, 1000uF, Surface Mount, 4141
A+ 16SVF1000M (PAN)
 
400 шт High Voltage, Temp and Capacitance
A+ CDL025M102XDBPKKKV00R (SUSCON)
 
в ленте 250 шт
A+ EEVFK1E102Q (PAN)
 
в ленте 200 шт Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 25V, 20% +Tol, 20% -Tol, 1000uF, Surface Mount, 5353
A+ 16SVPF1000M (PAN)
 
в ленте 400 шт High Voltage / Large capacitance
A+ EEVTG1C102M (PAN)
 
125 шт Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 16V, 20% +Tol, 20% -Tol, 1000uF, Surface Mount, 6767
A+ EEVTG1C102UQ (PAN)
 
в ленте 200 шт Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 16V, 20% +Tol, 20% -Tol, 1000uF, Surface Mount, 5353
A+ EEVTG1E102M (PAN)
 
125 шт Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 25V, 20% +Tol, 20% -Tol, 1000uF, Surface Mount, 7575
A+ EEVTG1E102UM (PAN)
 
125 шт Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 25V, 20% +Tol, 20% -Tol, 1000uF, Surface Mount, 6767
A+ EEETK1C102AM (PAN)
 
125 шт Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 16V, 20% +Tol, 20% -Tol, 1000uF, Surface Mount, 6767
A+ EEEFK1C102SV (PAN)
 
500 шт
 
Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 16V, 20% +Tol, 20% -Tol, 1000uF, Surface Mount, 4141
A+ EEH-ZS1E102UP (PAN)
 
 
A+ EEETK1E102AM (PAN)
 
125 шт Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 25V, 20% +Tol, 20% -Tol, 1000uF, Surface Mount, 7575
A+ EEH-ZS1E102UV (PAN)
 
 
A+ 16SVF1000MX (PAN)
 
 
Aluminum Electrolytic Capacitor, Polarized, Aluminum (solid Polymer), 16V, 20% +Tol, 20% -Tol, 1000uF, Surface Mount, 4141
A+ EEEFK1E102AQ (PAN)
 
в ленте 200 шт Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 25V, 20% +Tol, 20% -Tol, 1000uF, Surface Mount, 5353
A+ 16SVT1000M (PAN)
 
400 шт Aluminum Electrolytic Capacitor, Polarized, Aluminum (solid Polymer), 16V, 20% +Tol, 20% -Tol, 1000uF, Surface Mount, 4141
A+ EEEFK1E102AV (PAN)
 
200 шт Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 25V, 20% +Tol, 20% -Tol, 1000uF, Surface Mount, 5353
A+ EEETKE102UAM (PAN)
 
125 шт Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 25V, 20% +Tol, 20% -Tol, 1000uF, Surface Mount, 6767
A+ EEETKC102UAQ (PAN)
 
200 шт Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 16V, 20% +Tol, 20% -Tol, 1000uF, Surface Mount, 5353
A+ 16SVPF1000MX (PAN)
 
75 шт
 
Aluminum Electrolytic Capacitor, Polarized, Aluminum (solid Polymer), 16V, 20% +Tol, 20% -Tol, 1000uF, Surface Mount, 4141
A+ 16SVPT1000M (PAN)
 
 
Aluminum Electrolytic Capacitor, Polarized, Aluminum (solid Polymer), 16V, 20% +Tol, 20% -Tol, 1000uF, Surface Mount, 4141
A+ EEEHD1E102AQ (PAN)
 
200 шт Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 25V, 20% +Tol, 20% -Tol, 1000uF, Surface Mount, 5353

Файлы 2

показать свернуть
Aluminum Electrolytic Capacitors Surface Mount Type Halogen-free FKS series 6.3 V to 50 V 63 V to 100 V : High temperature Lead-Free reflow : Standard Lead-Free reflow Features ● ● ● ● Country of origin Endurance:105 ℃ 2000 h 1 size smaller than series FK AEC-Q200 compliant RoHS compliant ● Malaysia Specifications Category temp. range Rated voltage range Capacitance range Capacitance tolerance Leakage current Dissipation factor (tan δ) Characteristics at low temperature Endurance Shelf life Resistance to soldering heat –55 ℃ to +105 ℃ 6.3 V to 100 V 27 μF to 1800 μF ±20 % (120 Hz / +20 ℃) I ≦ 0.01 CV or 3 (μA) After 2 minutes (Whichever is greater) Please see the attached characteristics list Rated voltage (V) 6.3 10 16 25 35 50 63 80 100 Z (–25 ℃) / Z (+20 ℃) 2 2 2 2 2 2 2 2 2 (Impedance ratio at 120 Hz) Z (–40 ℃) / Z (+20 ℃) 3 3 3 3 3 3 3 3 3 Z (–55 ℃) / Z (+20 ℃) 4 4 4 3 3 3 3 3 3 After applying rated working voltage for 2000 hours at +105 ℃ ± 2 ℃ and then being stabilized at +20 ℃, capacitors shall meet the following limits. Capacitance change Within ±30 % of the initial value Dissipation factor(tan δ) ≦ 200 % of the initial limit Leakage current Within the initial limit After storage for 1000 hours at +105 ℃ ± 2 ℃ with no voltage applied and then being stabilized at +20 ℃, capacitors shall meet the limits specified in endurance. (With voltage treatment) After reflow soldering and then being stabilized at +20 ℃, capacitors shall meet the following limits. Capacitance change Within ±10 % of the initial value Dissipation factor(tan δ) Within the initial limit Leakage current Within the initial limit Frequency correction factor for ripple current Frequency (Hz) Correction factor 120 0.65 10 k 0.95 100 k to 1.00 Dimensions Example : 6.3 V 270 μF Marking color : BLACK A±0.2 K 0.3 max. Rated voltage code Pressure Relief (ø10 and larger) (P) W (I) B±0.2 L H Series identification H 270 j KS Capacitance (μF) øD±0.5 Negative polarity marking (–) (I) Marking 1k 0.85 ()Reference size Lot number R.voltage code j A C E V 6.3 10 16 25 35 Unit:V H J K 2A 50 63 80 100 Unit:mm Size code D D8 F G øD L A, B 6.3 5.8±0.3 6.6 6.3 7.7±0.3 6.6 8.0 10.2±0.3 8.3 10.0 10.2±0.3 10.3 H 7.8 max. 7.8 max. 10.0 max. 12.0 max. I 2.6 2.6 3.4 3.5 W 0.65±0.1 0.65±0.1 0.90±0.2 0.90±0.2 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. P K +0.15 1.8 0.35 ー0.20 +0.15 1.8 0.35 ー0.20 3.1 0.70±0.2 4.6 0.70±0.2 13-Mar-20 PDF
Документация на EEEFKJ471XSL 

Series catalog

Дата модификации: 24.09.2021

Размер: 508.8 Кб

9 стр.

Aluminum Electrolytic Capacitors Surface Mount Type Halogen-free FKS series 6.3 V to 50 V 63 V to 100 V : High temperature Lead-Free reflow : Standard Lead-Free reflow Features ● ● ● ● Country of origin Endurance:105 ℃ 2000 h 1 size smaller than series FK AEC-Q200 compliant RoHS compliant ● Malaysia Specifications Category temp. range Rated voltage range Capacitance range Capacitance tolerance Leakage current Dissipation factor (tan δ) Characteristics at low temperature Endurance Shelf life Resistance to soldering heat –55 ℃ to +105 ℃ 6.3 V to 100 V 27 μF to 1800 μF ±20 % (120 Hz / +20 ℃) I ≦ 0.01 CV or 3 (μA) After 2 minutes (Whichever is greater) Please see the attached characteristics list Rated voltage (V) 6.3 10 16 25 35 50 63 80 100 Z (–25 ℃) / Z (+20 ℃) 2 2 2 2 2 2 2 2 2 (Impedance ratio at 120 Hz) Z (–40 ℃) / Z (+20 ℃) 3 3 3 3 3 3 3 3 3 Z (–55 ℃) / Z (+20 ℃) 4 4 4 3 3 3 3 3 3 After applying rated working voltage for 2000 hours at +105 ℃ ± 2 ℃ and then being stabilized at +20 ℃, capacitors shall meet the following limits. Capacitance change Within ±30 % of the initial value Dissipation factor(tan δ) ≦ 200 % of the initial limit Leakage current Within the initial limit After storage for 1000 hours at +105 ℃ ± 2 ℃ with no voltage applied and then being stabilized at +20 ℃, capacitors shall meet the limits specified in endurance. (With voltage treatment) After reflow soldering and then being stabilized at +20 ℃, capacitors shall meet the following limits. Capacitance change Within ±10 % of the initial value Dissipation factor(tan δ) Within the initial limit Leakage current Within the initial limit Frequency correction factor for ripple current Frequency (Hz) Correction factor 120 0.65 10 k 0.95 100 k to 1.00 Dimensions Example : 6.3 V 270 μF Marking color : BLACK A±0.2 K 0.3 max. Rated voltage code Pressure Relief (ø10 and larger) (P) W (I) B±0.2 L H Series identification H 270 j KS Capacitance (μF) øD±0.5 Negative polarity marking (–) (I) Marking 1k 0.85 ()Reference size Lot number R.voltage code j A C E V 6.3 10 16 25 35 Unit:V H J K 2A 50 63 80 100 Unit:mm Size code D D8 F G øD L A, B 6.3 5.8±0.3 6.6 6.3 7.7±0.3 6.6 8.0 10.2±0.3 8.3 10.0 10.2±0.3 10.3 H 7.8 max. 7.8 max. 10.0 max. 12.0 max. I 2.6 2.6 3.4 3.5 W 0.65±0.1 0.65±0.1 0.90±0.2 0.90±0.2 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. P K +0.15 1.8 0.35 ー0.20 +0.15 1.8 0.35 ー0.20 3.1 0.70±0.2 4.6 0.70±0.2 13-Mar-20 PDF
Документация на серию FKS 

Series catalog

Дата модификации: 18.08.2021

Размер: 511.8 Кб

9 стр.

    Внимание! Точность указанного на сайте описания товара не может быть гарантирована. Для получения более полной и точной информации о товаре смотрите техническое описание (Datasheet) на сайте производителя.