Серия алюминиевых конденсаторов FKS

Panasonic Industrial Europe GmbH

Общие характеристики

 Раздел Алюминиевые конденсаторы
Допуск по ёмкости
Температура рабочая
Способ монтажа
Срок службы

Документация на серию FKS

Aluminum Electrolytic Capacitors Surface Mount Type Halogen-free FKS series 6.3 V to 50 V 63 V to 100 V : High temperature Lead-Free reflow : Standard Lead-Free reflow Features ● ● ● ● Country of origin Endurance：105 ℃ 2000 h 1 size smaller than series FK AEC-Q200 compliant RoHS compliant ● Malaysia Specifications Category temp. range Rated voltage range Capacitance range Capacitance tolerance Leakage current Dissipation factor (tan δ) Characteristics at low temperature Endurance Shelf life Resistance to soldering heat –55 ℃ to +105 ℃ 6.3 V to 100 V 27 μF to 1800 μF ±20 % (120 Hz / +20 ℃) I ≦ 0.01 CV or 3 (μA) After 2 minutes (Whichever is greater) Please see the attached characteristics list Rated voltage (V) 6.3 10 16 25 35 50 63 80 100 Z (–25 ℃) / Z (+20 ℃) 2 2 2 2 2 2 2 2 2 (Impedance ratio at 120 Hz) Z (–40 ℃) / Z (+20 ℃) 3 3 3 3 3 3 3 3 3 Z (–55 ℃) / Z (+20 ℃) 4 4 4 3 3 3 3 3 3 After applying rated working voltage for 2000 hours at +105 ℃ ± 2 ℃ and then being stabilized at +20 ℃, capacitors shall meet the following limits. Capacitance change Within ±30 % of the initial value Dissipation factor（tan δ) ≦ 200 % of the initial limit Leakage current Within the initial limit After storage for 1000 hours at +105 ℃ ± 2 ℃ with no voltage applied and then being stabilized at +20 ℃, capacitors shall meet the limits specified in endurance. (With voltage treatment) After reflow soldering and then being stabilized at +20 ℃, capacitors shall meet the following limits. Capacitance change Within ±10 % of the initial value Dissipation factor（tan δ) Within the initial limit Leakage current Within the initial limit Frequency correction factor for ripple current Frequency (Hz) Correction factor 120 0.65 10 k 0.95 100 k to 1.00 Dimensions Example : 6.3 V 270 μF Marking color : BLACK A±0.2 K 0.3 max. Rated voltage code Pressure Relief (ø10 and larger) （P） W （I） B±0.2 L H Series identification H 270 j KS Capacitance (μF) øD±0.5 Negative polarity marking (–) （I） Marking 1k 0.85 （）Reference size Lot number R.voltage code j A C E V 6.3 10 16 25 35 Unit：V H J K 2A 50 63 80 100 Unit：mm Size code D D8 F G øD L A, B 6.3 5.8±0.3 6.6 6.3 7.7±0.3 6.6 8.0 10.2±0.3 8.3 10.0 10.2±0.3 10.3 H 7.8 max. 7.8 max. 10.0 max. 12.0 max. I 2.6 2.6 3.4 3.5 W 0.65±0.1 0.65±0.1 0.90±0.2 0.90±0.2 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. P K +0.15 1.8 0.35 ー0.20 +0.15 1.8 0.35 ー0.20 3.1 0.70±0.2 4.6 0.70±0.2 13-Mar-20 PDF
Документация на EEEFKJ471XSL 

Series catalog

Дата модификации: 24.09.2021

Размер: 508.8 Кб

9 стр.

Aluminum Electrolytic Capacitors Surface Mount Type Halogen-free FKS series 6.3 V to 50 V 63 V to 100 V : High temperature Lead-Free reflow : Standard Lead-Free reflow Features ● ● ● ● Country of origin Endurance：105 ℃ 2000 h 1 size smaller than series FK AEC-Q200 compliant RoHS compliant ● Malaysia Specifications Category temp. range Rated voltage range Capacitance range Capacitance tolerance Leakage current Dissipation factor (tan δ) Characteristics at low temperature Endurance Shelf life Resistance to soldering heat –55 ℃ to +105 ℃ 6.3 V to 100 V 27 μF to 1800 μF ±20 % (120 Hz / +20 ℃) I ≦ 0.01 CV or 3 (μA) After 2 minutes (Whichever is greater) Please see the attached characteristics list Rated voltage (V) 6.3 10 16 25 35 50 63 80 100 Z (–25 ℃) / Z (+20 ℃) 2 2 2 2 2 2 2 2 2 (Impedance ratio at 120 Hz) Z (–40 ℃) / Z (+20 ℃) 3 3 3 3 3 3 3 3 3 Z (–55 ℃) / Z (+20 ℃) 4 4 4 3 3 3 3 3 3 After applying rated working voltage for 2000 hours at +105 ℃ ± 2 ℃ and then being stabilized at +20 ℃, capacitors shall meet the following limits. Capacitance change Within ±30 % of the initial value Dissipation factor（tan δ) ≦ 200 % of the initial limit Leakage current Within the initial limit After storage for 1000 hours at +105 ℃ ± 2 ℃ with no voltage applied and then being stabilized at +20 ℃, capacitors shall meet the limits specified in endurance. (With voltage treatment) After reflow soldering and then being stabilized at +20 ℃, capacitors shall meet the following limits. Capacitance change Within ±10 % of the initial value Dissipation factor（tan δ) Within the initial limit Leakage current Within the initial limit Frequency correction factor for ripple current Frequency (Hz) Correction factor 120 0.65 10 k 0.95 100 k to 1.00 Dimensions Example : 6.3 V 270 μF Marking color : BLACK A±0.2 K 0.3 max. Rated voltage code Pressure Relief (ø10 and larger) （P） W （I） B±0.2 L H Series identification H 270 j KS Capacitance (μF) øD±0.5 Negative polarity marking (–) （I） Marking 1k 0.85 （）Reference size Lot number R.voltage code j A C E V 6.3 10 16 25 35 Unit：V H J K 2A 50 63 80 100 Unit：mm Size code D D8 F G øD L A, B 6.3 5.8±0.3 6.6 6.3 7.7±0.3 6.6 8.0 10.2±0.3 8.3 10.0 10.2±0.3 10.3 H 7.8 max. 7.8 max. 10.0 max. 12.0 max. I 2.6 2.6 3.4 3.5 W 0.65±0.1 0.65±0.1 0.90±0.2 0.90±0.2 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. P K +0.15 1.8 0.35 ー0.20 +0.15 1.8 0.35 ー0.20 3.1 0.70±0.2 4.6 0.70±0.2 13-Mar-20 PDF
Документация на серию FKS 

Series catalog

Дата модификации: 18.08.2021

Размер: 511.8 Кб

9 стр.

    Товары серии FKS

    Наименование i Упаковка Ёмкость Напряжение Диаметр Высота ESR Ток пульсаций НЧ Размер
    EEEFK0J182SL (PAN)
     
    		10×10×10.3 мм
    EEEFK0J271SL (PAN)
     
    		6.3×6.3×6.6 мм
    EEEFK1A122SL (PAN)
     
    		10×10×10.3 мм
    EEEFK1A152SL (PAN)
     
    		10×10×10.3 мм
    EEEFK1A221SL (PAN)
     
    		6.3×6.3×6.6 мм
    EEEFK1A821SL (PAN)
     
    		8×8×8.3 мм
    EEEFK1C102SL (PAN)
     
    		10×10×10.3 мм
    EEEFK1C151SL (PAN)
     
    		6.3×6.3×6.6 мм
    EEEFK1C561SL (PAN)
     
    		8×8×8.3 мм
    EEEFK1C681SL (PAN)
     
    		8×8×8.3 мм
    EEEFK1E101SL (PAN)
     
    		6.3×6.3×6.6 мм
    EEEFK1E391SL (PAN)
     
    		8×8×8.3 мм
    EEEFK1E681SL (PAN)
     
    		10×10×10.3 мм
    EEEFK1H181SL (PAN)
     
    		8×8×8.3 мм
    EEEFK1H390SL (PAN)
     
    		6.3×6.3×6.6 мм
    EEEFK1J121SL (PAN)
     
    		10×10×10.3 мм
    EEEFK1K470SL (PAN)
     
    		8×8×8.3 мм
    EEEFK1K820SL (PAN)
     
    		10×10×10.3 мм
    EEEFK1V271SL (PAN)
     
    		8×8×8.3 мм
    EEEFK1V331SL (PAN)
     
    		8×8×8.3 мм
    EEEFK1V680SL (PAN)
     
    		6.3×6.3×6.6 мм
    EEEFK1V820SL (PAN)
     
    		6.3×6.3×6.6 мм
    EEEFK2A270SL (PAN)
     
    		8×8×8.3 мм
    EEEFK2A470SL (PAN)
     
    		10×10×10.3 мм
    EEEFK2A470SP (PAN)
     
    		— — —
    EEEFKA331XSL (PAN)
     
    		6.3×6.3×6.6 мм
    EEEFKC271XSL (PAN)
     
    		6.3×6.3×6.6 мм
    EEEFKE151XSL (PAN)
     
    		6.3×6.3×6.6 мм
    EEEFKE181XSL (PAN)
     
    		6.3×6.3×6.6 мм
    EEEFKH820XSL (PAN)
     
    		6.3×6.3×6.6 мм
    EEEFKJ471XSL (PAN)
     
    		6.3×6.3×6.6 мм
    EEEFKV121XSL (PAN)
     
    		6.3×6.3×6.6 мм

    FKS публикации

    25 марта 2020
    новость

    Новые компактные алюминиевые конденсаторы серии FN от Panasonic

    В начале этого года линейка электролитических конденсаторов Panasonic пополнилась компактными алюминиевыми конденсаторами серии FN. В рамках новой серии анонсировано более 150 различных изделий. Серия конденсаторов FN является продолжением серий... ...читать

    21 июня 2019
    статья

    Конденсаторы Panasonic. Часть 1. Алюминий

    Виктор Чистяков (г. Малоярославец) Известная уже 100 лет своими инновациями компания Panasonic даже в столь традиционные изделия как алюминиевые электролитические конденсаторы ухитряется вносить оригинальные и полезные конструктивные дополнения.... ...читать