EEEFK1E331GL

Конденсатор алюминиевый 25 В x 330 мкФ ±20%, SMD, -55...105 °C
развернуть ▼ свернуть ▲

Технические характеристики

показать свернуть
Ёмкость номинальная
Допуск по ёмкости
Напряжение номинальное
Температура рабочая
Диаметр корпуса
Высота корпуса
Способ монтажа
Ток пульсаций низких частот
Диаметр x Высота 8×8×8.3 мм
  Примечание: Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 25V, 20% +Tol, 20% -Tol, 330uF, Surface Mount, 3333
Нашли ошибку? Выделите её курсором и нажмите CTRL + ENTER

Аналоги 34

показать свернуть
Тип Наименование Корпус Упаковка i Ёмкость Допуск Напряжение Температура рабочая Срок службы Диаметр Высота Способ монтажа Шаг ESR Импеданс Ток пульсаций НЧ Ток пульсаций ВЧ Применение Примечание Карточка
товара
P= RV331M025F105ETR (CAPXON)
 
 
P= EEVFK1E331P (PAN)
 
 
P= EEEFN1E331V (PAN)
 
500 шт V-FN, Vibration proof, 25V, 330uF, 105°C, 2000h, 8x10.2mm, ripple 600mArms, 0.16Ohm
P= DV331M025F105ETR (CAPXON)
 
 
P= CD025M331F10PKKKV00R (SUSCON)
 
в ленте 500 шт
P- EEEFH1E331UL (PAN)
 
500 шт
 
V-FH / 25V / 330uF / 105°C / 10000h / 8x10.2mm / ripple 600mArms / ESR 0.2Ohm
P- EEEFN1E331L (PAN)
 
Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 25V, 20% +Tol, 20% -Tol, 330uF, Surface Mount, 3333
P- EEEFK1E331AP (PAN)
 
500 шт Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 25V, 20% +Tol, 20% -Tol, 330uF, Surface Mount, 3333
P- EEEFN1E331P (PAN)
 
500 шт V-FN, 25V, 330uF, 105°C, 2000h, 8x10.2mm, ripple 600mArms, 0.16Ohm
P- EEEFK1E331AL (PAN)
 
Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 25V, 20% +Tol, 20% -Tol, 330uF, Surface Mount, 3333
P- EEEFK1E331P (PAN)
 
в ленте 500 шт Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 25V, 20% +Tol, 20% -Tol, 330uF, Surface Mount, 3333
P- EEEFP1E331AP (PAN)
 
500 шт Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 25V, 20% +Tol, 20% -Tol, 330uF, Surface Mount, 3333
P- EEEFK1E331GP (PAN)
 
в ленте 500 шт Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 25V, 20% +Tol, 20% -Tol, 330uF, Surface Mount, 3333
P- EEEFP1E331AL (PAN)
 
 
Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 25V, 20% +Tol, 20% -Tol, 330uF, Surface Mount, 3333
A+ EEEFT1V331AP (PAN)
 
в ленте 500 шт Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 35V, 20% +Tol, 20% -Tol, 330uF, Surface Mount, 3333
A+ JCK1E331M100105 (JB)
 
в ленте 500 шт Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 25V, 20% +Tol, 20% -Tol, 330uF, Surface Mount, 4141
A+ JCK1V331M100105 (JB)
 
в ленте 500 шт Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 35V, 20% +Tol, 20% -Tol, 330uF, Surface Mount, 4141
A+ JCP1E331M080090 (JB)
 
в ленте 10 шт
 
A+ CK025M331G10PKKKV00R (SUSCON)
 
в ленте 500 шт
A+ CDL050M331XDBPKKKV00R (SUSCON)
 
в ленте 250 шт
A+ EEEFK1V331AP (PAN)
 
в ленте 500 шт Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 35V, 20% +Tol, 20% -Tol, 330uF, Surface Mount, 4141
A+ EEEFK1V331P (PAN)
 
в ленте 500 шт Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 35V, 20% +Tol, 20% -Tol, 330uF, Surface Mount, 4141
A+ EEEFN1V331UP (PAN)
 
в ленте 500 шт V-FN, 35V, 330uF, 105°C, 2000h, 8x10.2mm, ripple 600mArms, 0.16Ohm
A+ EEEFT1H331AP (PAN)
 
в ленте 500 шт Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 50V, 20% +Tol, 20% -Tol, 330uF, Surface Mount, 4141
A+ EEVFK1H331V (PAN)
 
в ленте 200 шт Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 50V, 20% +Tol, 20% -Tol, 330uF, Surface Mount, 5353
A+ EEEFK1V331GP (PAN)
 
в ленте 500 шт Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 35V, 20% +Tol, 20% -Tol, 330uF, Surface Mount, 4141
A+ EEHZA1E331P (PAN)
 
в ленте 500 шт
A+ EEH-ZK1V331V (PAN)
 
 
A+ EEH-ZK1E331UP (PAN)
 
 
A+ CS035M331G10PKKKV00R (SUSCON)
 
A+ EEEHD1E331AP (PAN)
 
500 шт Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 25V, 20% +Tol, 20% -Tol, 330uF, Surface Mount, 4141
A+ 25SVPF330M (PAN)
 
в ленте 400 шт High Voltage / Large capacitance
A+ EEHZK1V331P (PAN)
 
в ленте 500 шт
A+ EEEFK1V331AL (PAN)
 
Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 35V, 20% +Tol, 20% -Tol, 330uF, Surface Mount, 4141

Файлы 2

показать свернуть
Aluminum Electrolytic Capacitors Surface Mount Type Halogen-free FK series Features ● ● ● ● ● Country of origin Endurance:105 ℃ 2000 h to 5000 h Low impedance(40 % to 60 % less than FC series) Miniaturized (30 % to 50 % less than FC series) AEC-Q200 compliant RoHS compliant ● Malaysia Specifications Category temp. range Rated voltage range Capacitance range Capacitance tolerance Leakage current Dissipation factor (tan δ) Characteristics at low temperature Endurance Shelf life Resistance to soldering heat –55 ℃ to +105 ℃ 6.3 V to 100 V 4.7 μF to 1500 μF ±20 % (120 Hz / +20 ℃) I ≦ 0.01 CV or 3 (μA) After 2 minutes (Whichever is greater) Please see the attached characteristics list Rated voltage (V) 6.3 10 16 25 35 50 63 80 100 Z (–25 ℃) / Z (+20 ℃) 2 2 2 2 2 2 2 2 2 (Impedance ratio at 120 Hz) Z (–40 ℃) / Z (+20 ℃) 3 3 3 3 3 3 3 3 3 Z (–55 ℃) / Z (+20 ℃) 4 4 4 3 3 3 3 3 3 After applying rated working voltage for 2000 hours at +105 ℃ ± 2 ℃ and then being stabilized at +20 ℃, capacitors shall meet the following limits.(Suffix "G" is 5000 h) Capacitance change Within ±30 % of the initial value (Suffix “G” is 35 %) Dissipation factor(tan δ) ≦ 200 % of the initial limit (Suffix “G” is 300 %) Leakage current Within the initial limit After storage for 1000 hours at +105 ℃ ± 2 ℃ with no voltage applied and then being stabilized at +20 ℃, capacitors shall meet the limits specified in endurance. (With voltage treatment) After reflow soldering and then being stabilized at +20 ℃, capacitors shall meet the following limits. Capacitance change Within ±10 % of the initial value Dissipation factor(tan δ) Within the initial limit Leakage current Within the initial limit Frequency correction factor for ripple current Frequency (Hz) Correction factor 50, 60 0.70 120 0.75 10 k 0.95 100 k to 1.00 Example : 50 V 10 μF Marking color : BLACK A±0.2 K 0.3 max. Mark for Lead-Free Rated voltage code H L products (Black dot) (I) Series identification B±0.2 10 H FK H Capacitance (μF) øD±0.5 Negative polarity marking (–) W Pressure Relief (ø10 and larger) ()Reference size Lot number R. voltage code j A C E V 6.3 10 16 25 35 (I) Dimensions (P) Marking 1k 0.90 Unit:mm H J K 2A Unit:V 50 63 80 100 Size code D D8 E F G øD L A, B 6.3 5.8±0.3 6.6 6.3 7.7±0.3 6.6 8.0 6.2±0.3 8.3 8.0 10.2±0.3 8.3 10.0 10.2±0.3 10.3 H I W 7.8 max. 7.8 max. 9.5 max. 10.0 max. 12.0 max. 2.6 2.6 3.4 3.4 3.5 0.65±0.1 0.65±0.1 0.65±0.1 0.90±0.2 0.90±0.2 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. P K +0.15 1.8 0.35 ー0.20 +0.15 1.8 0.35 ー0.20 +0.15 2.2 0.35 ー0.20 3.1 0.70±0.2 4.6 0.70±0.2 13-Mar-20 PDF
Документация на EEEFK1C471GL 

Series catalog

Дата модификации: 24.09.2021

Размер: 513.5 Кб

9 стр.

Aluminum Electrolytic Capacitors Surface Mount Type FK series V type Features ● ● ● ● ● ● Endurance:105 ℃ 2000 h to 5000 h Low impedance(40 % to 60 % less than FC series) Miniaturized (30 % to 50 % less than FC series) Vibration-proof product (30G guaranteed) is available upon request(φ6.3 ≦) AEC-Q200 compliant RoHS compliant Specifications Category temp. range Rated voltage range Capacitance range Capacitance tolerance Leakage current Dissipation factor (tan δ) Characteristics at low temperature Endurance Shelf life Resistance to soldering heat –55 ℃ to +105 ℃ 6.3 V to 100 V 3.3 μF to 6800 μF ±20 % (120 Hz / +20 ℃) I ≦ 0.01 CV or 3 (μA) After 2 minutes (Whichever is greater) Please see the attached characteristics list Rated voltage (V) 6.3 10 16 25 35 50 63 80 100 Z (–25 ℃) / Z (+20 ℃) 2 2 2 2 2 2 2 2 2 (Impedance ratio at 120 Hz) Z (–40 ℃) / Z (+20 ℃) 3 3 3 3 3 3 3 3 3 Z (–55 ℃) / Z (+20 ℃) 4 4 4 3 3 3 3 3 3 After applying rated working voltage for 2000 hours at +105 ℃ ± 2 ℃ and then being stabilized at +20 ℃, capacitors shall meet the following limits. (≧ φ12.5 and suffix “G” in φ8×10.2, φ10×10.2 are 5000 hours) Capacitance change Within ±30 % of the initial value (Suffix “G” is 35 %) Dissipation factor(tan δ) ≦ 200 % of the initial limit (Suffix “G” is 300 %) Leakage current Within the initial limit After storage for 1000 hours at +105 ℃ ± 2 ℃ with no voltage applied and then being stabilized at +20 ℃, capacitors shall meet the limits specified in endurance. (With voltage treatment) After reflow soldering and then being stabilized at +20 ℃, capacitors shall meet the following limits. Capacitance change Within ±10 % of the initial value Dissipation factor(tan δ) Within the initial limit Leakage current Within the initial limit Frequency correction factor for ripple current Frequency (Hz) Correction factor 50, 60 0.70 120 0.75 Mark for Lead-Free j FK Lot number R. voltage code j A C E V 6.3 10 16 25 35 Series identification Rated voltage code Unit:V 50 63 80 100 Size code B C D D8 E F G H13 J16 K16 φD 4.0 5.0 6.3 6.3 8.0 8.0 10.0 12.5 16.0 18.0 L 5.8±0.3 5.8±0.3 5.8±0.3 7.7±0.3 6.2±0.3 10.2±0.3 10.2±0.3 13.5±0.5 16.5±0.5 16.5±0.5 A, B 4.3 5.3 6.6 6.6 8.3 8.3 10.3 13.5 17.0 19.0 H 5.5 max. 6.5 max. 7.8 max. 7.8 max. 9.5 max. 10.0 max. 12.0 max. 15.0 max. 19.0 max. 21.0 max. (I) K W Pressure Relief (φ10 and larger) Capacitance (μF) H J K 2A (P) L Negative polarity marking (–) 3300 H Rated voltage code (I) ≧ φ12.5 Lot number Series identification A±0.2 0.3 max. φD±0.5 Negative polarity marking (–) Capacitance (μF) 22 j FK 100 k to 1.00 Dimensions Example : 6.3 V 22 μF, 6.3 V 3300 μF Marking color : BLACK ≦ φ10 10 k 0.95 B±0.2 Marking 1k 0.90 ()Reference size I 1.8 2.2 2.6 2.6 3.4 3.4 3.5 4.7 5.5 6.7 W 0.65±0.1 0.65±0.1 0.65±0.1 0.65±0.1 0.65±0.1 0.90±0.2 0.90±0.2 0.90±0.3 1.20±0.3 1.20±0.3 P 1.0 1.5 1.8 1.8 2.2 3.1 4.6 4.4 6.7 6.7 Unit:mm K 0.35 +0.15 ー0.20 0.35 +0.15 ー0.20 0.35 +0.15 ー0.20 0.35 +0.15 ー0.20 0.35 +0.15 ー0.20 0.70±0.2 0.70±0.2 0.70±0.3 0.70±0.3 0.70±0.3 ・The dimensions of the vibration-proof products, please refer to the page of the mounting specification. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 06-Dec-19 PDF
Документация на серию FK 

Series catalog

Дата модификации: 20.04.2021

Размер: 1011.9 Кб

12 стр.

    Внимание! Точность указанного на сайте описания товара не может быть гарантирована. Для получения более полной и точной информации о товаре смотрите техническое описание (Datasheet) на сайте производителя.