EEEFP1V221AV

Panasonic Industrial Europe GmbH
Конденсатор алюминиевый 35 В x 220 мкФ ±20%, SMD, -55...105 °C, 2000 ч
развернуть ▼ свернуть ▲
Внешний вид серии FP(A)_SMD

Технические характеристики

показать свернуть
Ёмкость номинальная
Допуск по ёмкости
Напряжение номинальное
Температура рабочая
Срок службы
Диаметр корпуса
Высота корпуса
Способ монтажа
Эквивалентное последовательное сопротивление
Ток пульсаций низких частот
Диаметр x Высота 8×8×8.3 мм
  Примечание: Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 35V, 20% +Tol, 20% -Tol, 220uF, Surface Mount, 3333
Нашли ошибку? Выделите её курсором и нажмите CTRL + ENTER

Аналоги 23

показать свернуть
Тип Наименование Корпус Упаковка i Ёмкость Допуск Напряжение Температура рабочая Срок службы Диаметр Высота Способ монтажа Шаг ESR Импеданс Ток пульсаций НЧ Ток пульсаций ВЧ Применение Примечание Карточка
товара
P- EEEFN1V221V (PAN)
 
— 500 шт — — — — V-FN, Vibration proof, 35V, 220uF, 105°C, 2000h, 8x10.2mm, ripple 600mArms, 0.16Ohm
A+ CK050M221G10PKKKV00R (SUSCON)
 
— в ленте 500 шт — — — — — —
A+ EEEFK1V221P (PAN)
 
— в ленте 500 шт — — — — — Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 35V, 20% +Tol, 20% -Tol, 220uF, Surface Mount, 3333
A+ EEEFK1H221P (PAN)
 
— в ленте 500 шт конденсатор алюминиевый -55...105 °C — — — — — Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 50V, 20% +Tol, 20% -Tol, 220uF, Surface Mount, 4141
A+ EEEFK1H221GP (PAN)
 
— в ленте 500 шт — — — — — Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 50V, 20% +Tol, 20% -Tol, 220uF, Surface Mount, 4141
A+ JCS1V221M100105 (JB)
 
— в ленте 500 шт — — — — — — —
A+ CK035M221G10PKKKV00R (SUSCON)
 
— в ленте 500 шт — — — — — —
A+ CDL063M221XDBPKKKV00R (SUSCON)
 
— в ленте 250 шт — — — — — — —
A+ CDL050M221G10PKKKV00R (SUSCON)
 
— в ленте 500 шт — — — — — —
A+ EEEFT1H221AP (PAN)
 
— в ленте 500 шт — — — — Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 50V, 20% +Tol, 20% -Tol, 220uF, Surface Mount, 3333
A+ JCK1V221M080105 (JB)
 
— в ленте 500 шт — — — — — — —
A+ EEEFP1H221AP (PAN)
 
— в ленте 500 шт — — — — Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 50V, 20% +Tol, 20% -Tol, 220uF, Surface Mount, 4141
A+ EEEHA1H221P (PAN)
 
— в ленте 500 шт — — — — — Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 50V, 20% +Tol, 20% -Tol, 220uF, Surface Mount, 4141
A+ EEVFK1J221Q (PAN)
 
— в ленте 200 шт — — — — — Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 63V, 20% +Tol, 20% -Tol, 220uF, Surface Mount, 5353
A+ EEEFK1V221AP (PAN)
 
— в ленте 500 шт — — — — — Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 35V, 20% +Tol, 20% -Tol, 220uF, Surface Mount, 3333
A+ EEVTG1J221Q (PAN)
 
— в ленте 200 шт — — — — Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 63V, 20% +Tol, 20% -Tol, 220uF, Surface Mount, 5353
A+ EEH-ZA1V221V (PAN)
 
—
 
 — — — —
A+ JCK1V221M100105 (JB)
 
— 500 шт — — — — — Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 35V, 20% +Tol, 20% -Tol, 220uF, Surface Mount, 4141
A+ EEEHBV221UAP (PAN)
 
— 500 шт — — — — — Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 35V, 20% +Tol, 20% -Tol, 220uF, Surface Mount, 4141
A+ EEEFC1H221P (PAN)
 
— в ленте 500 шт — — — — — Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 50V, 20% +Tol, 20% -Tol, 220uF, Surface Mount, 3939
A+ EEETC1V221P (PAN)
 
— в ленте 500 шт — — — — Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 35V, 20% +Tol, 20% -Tol, 220uF, Surface Mount, 4141
A+ JCK1H221M100105 (JB)
 
— в ленте 500 шт — — — — — Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 50V, 20% +Tol, 20% -Tol, 220uF, Surface Mount, 4141
A+ EEEFC1V221AP (PAN)
 
— 500 шт — — — — — Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 35V, 20% +Tol, 20% -Tol, 220uF, Surface Mount, 3939

Файлы 2

показать свернуть
Aluminum Electrolytic Capacitors Surface Mount Type FP series High temperature Lead-Free reflow (suffix : A✽) Features ● ● ● ● ● Endurance：105 ℃ 2000 h Low ESR (30 % to 50 % less than FK series) Vibration-proof product (30G guaranteed) is available upon request（ø6.3 ≦） AEC-Q200 compliant RoHS compliant Specifications Category temp. range Rated voltage range Capacitance range Capacitance tolerance Leakage current Dissipation factor (tan δ) Characteristics at low temperature Endurance Shelf life Resistance to soldering heat –55 ℃ to +105 ℃ 6.3 V to 50 V 10 μF to 1800 μF ±20 % (120 Hz / +20 ℃) I ≦ 0.01 CV or 3 (μA) After 2 minutes (Whichever is greater) Please see the attached characteristics list Rated voltage (V) 6.3 10 16 25 35 50 Z (–25 ℃) / Z (+20 ℃) 2 2 2 2 2 2 (Impedance ratio at 120 Hz) Z (–40 ℃) / Z (+20 ℃) 3 3 3 3 3 3 Z (–55 ℃) / Z (+20 ℃) 4 4 4 3 3 3 After applying rated working voltage for 2000 hours at +105 ℃ ± 2 ℃ and then being stabilized at +20 ℃, capacitors shall meet the following limits. Capacitance change Within ±30 % of the initial value Dissipation factor（tan δ) ≦ 200 % of the initial limit Leakage current Within the initial limit After storage for 1000 hours at +105 ℃ ± 2 ℃ with no voltage applied and then being stabilized at +20 ℃, capacitors shall meet the limits specified in endurance. (With voltage treatment) After reflow soldering and then being stabilized at +20 ℃, capacitors shall meet the following limits. Capacitance change Within ±10 % of the initial value Dissipation factor（tan δ) Within the initial limit Leakage current Within the initial limit Frequency correction factor for ripple current Freq.（Hz) 10 to 470 560 to 1800 120 1k 10 k 100 k to 0.65 0.70 0.85 0.90 0.95 0.95 1.00 1.00 0.3 max. 22 j FP Series identification L W Pressure Relief (ø10 and larger) Mark for Lead-Free （）Reference size products (Black dot) Rated voltage code Lot number R.voltage code j A C 6.3 10 16 Unit：V E V H 25 35 50 （P） Capacitance (μF) H øD±0.5 Negative polarity marking (–) A±0.2 （I） Example : 6.3 V 22 μF Marking color : BLACK （I） Dimensions K Marking B±0.2 Cap.（μF） Unit：mm Size code øD L A、B H I W B 4.0 5.8±0.3 4.3 5.5 max. 1.8 0.65±0.1 P K 1.0 0.35 +0.15 ー0.20 +0.15 ー0.20 +0.15 ー0.20 +0.15 ー0.20 +0.15 ー0.20 C 5.0 5.8±0.3 5.3 6.5 max. 2.2 0.65±0.1 1.5 0.35 D 6.3 5.8±0.3 6.6 7.8 max. 2.6 0.65±0.1 1.8 0.35 D8 6.3 7.7±0.3 6.6 7.8 max. 2.6 0.65±0.1 1.8 0.35 E 8.0 6.2±0.3 8.3 9.5 max. 3.4 0.65±0.1 2.2 0.35 F 8.0 10.2±0.3 8.3 10.0 max. 3.4 0.90±0.2 3.1 0.70±0.2 10.0 10.2±0.3 10.3 12.0 max. 3.5 0.90±0.2 4.6 0.70±0.2 G ・The dimensions of the vibration-proof products, please refer to the page of the mounting specification. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 06-Dec-19 PDF
Документация на EEEFP0J101AV 

Series catalog

Дата модификации: 24.09.2021

Размер: 646.2 Кб

11 стр.

Aluminum Electrolytic Capacitors (SMD Type) Surface Mount Type Series : FP Type : V High temperature Lead-Free reflow (suffix : A✽) Features ● Low ESR (30 % to 50 % less than FK series) ● Endurance : 105 °C 2000 h ● Vibration-proof product is available upon request. ● RoHS compliant (08 mm and larger) Specifications Category temperature range Rated voltage range Capacitance range Capacitance tolerance Leakage current Dissipation factor (tan d) Characteristics at low temperature Endurance Shelf life Resistance to soldering heat AEC-Q200 –55 °C to +105 °C 6.3 V.DC to 50 V.DC 10 μF to 1800 μF ±20 % (120 Hz/+20 °C) I < 0.01 CV or 3 (μA) After 2 minutes (whichever is greater) Please see the attached characteristics list V.DC 6.3 10 16 25 35 50 Z(–25 °C)/Z(+20 °C) 2 2 2 2 2 2 (Impedance ratio at 120 Hz) Z(–40°C)/Z(+20 °C) 3 3 3 3 3 3 Z(–55°C)/Z(+20 °C) 4 4 4 3 3 3 After applying rated working voltage at +105 °C ±2 °C for 2000 hours the capacitors shall meet the limits specified below. Post-test requirement at +20 °C Capacitance change Within ±30 % of the initial value < 200 % of the initial limit tan d DC leakege current Within the initial limit After storage for 1000 hours at +105 °C±2 °C with no voltage applied and then being stabilized at +20 °C, capacitors shall meet the limits specified in Endurance. (With voltage treatment) After reflow soldering and then being stabilized at +20 °C, capacitors shall meet the following limits. Capacitance change Within ±10 % of the initial value tan d Within the initial limit DC leakage current Within the initial limit AEC-Q200 compliant Frequency correction factor for ripple current Frequency (Hz) Capacitance (μF) 10 to 560 to 470 1800 120 1k 10 k 100 k to 0.65 0.75 0.85 0.90 0.95 0.95 1.00 1.00 22 j FP Series identification (P) B±0.2 + L Capacitance (μF) W Pressure Relief (010 and larger) Mark for Lead-Free products (Black dot) Rated voltage code Lot number R. Voltage 6.3 (V.DC) Code j H 0D±0.5 Negative polarity marking (–) A±0.2 – K 0.3 max. Example : 6.3 V.DC 22 μF Marking color : BLACK 10 16 25 35 50 A C E V H Size L A, B 0D code B 4.0 5.8±0.30 4.3 C 5.0 5.8±0.30 5.3 D 6.3 5.8±0.30 6.6 D8 6.3 7.7±0.30 6.6 E 8.0 6.2±0.30 8.3 F 8.0 10.2±0.30 8.3 G 10.0 10.2±0.30 10.3 (I) Dimensions (I) Marking ( ) Reference size (Unit : mm) H I W 5.5 max. 6.5 max. 7.8 max. 7.8 max. 9.5 max. 10.0 max. 12.0 max. 1.8 2.2 2.6 2.6 3.4 3.4 3.5 0.65±0.1 0.65±0.1 0.65±0.1 0.65±0.1 0.65±0.1 0.90±0.2 0.90±0.2 P K 1.0 0.35 +- 0.15 0.20 1.5 0.35 +- 0.15 0.20 1.8 0.35 +- 0.15 0.20 1.8 0.35 +- 0.15 0.20 2.2 0.35 +- 0.15 0.20 3.1 0.70±0.20 4.6 0.70±0.20 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 02 Mar. 2016 PDF
Документация на серию FP(A)_SMD 

N_AEC_V-FPA_E.indd

Дата модификации: 27.03.2019

Размер: 90.5 Кб

4 стр.

    Внимание! Точность указанного на сайте описания товара не может быть гарантирована. Для получения более полной и точной информации о товаре смотрите техническое описание (Datasheet) на сайте производителя.

    FX22V183YF196 (HIT-AIC)