EEEFT1V470AR

Panasonic Industrial Europe GmbH
Конденсатор алюминиевый 35 В x 47 мкФ ±20%, SMD, -55...105 °C, 2000 ч
развернуть ▼ свернуть ▲
Внешний вид серии FT_SMD

Технические характеристики

показать свернуть
Номинальная ёмкость
Допуск ёмкости
Номинальное напряжение
Диаметр корпуса
Высота корпуса
Рабочая температура
Срок службы
Способ монтажа
  Примечания: Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 35V, 20% +Tol, 20% -Tol, 47uF, Surface Mount, 2121
Диаметр x Высота 5×5×5.3 мм
Нашли ошибку? Выделите её курсором и нажмите CTRL + ENTER

Аналоги 18

показать свернуть
Тип Наименование Корпус Упаковка i Ёмкость Допуск Напряжение Диаметр Высота Траб Наработка Монтаж Примечания Выводы Карточка
товара
A+ CA035M0047REH-0607 (YAG)
 

ECAPSMD 47/35V 0607 CA (YAG) 		— в ленте 1000 шт конденсатор алюминиевый SMD 47 мкФ 35 В -40...85 °C 2000 ч Surface Mount Aluminum electrolytic —
A+ CB035M0047RSH-0607 (YAG)
 

ECAPSMD 47/35V 0607 105C CB (YAG) 		— в ленте 1000 шт конденсатор алюминиевый SMD 47 мкФ 35 В -40...105 °C 1000 ч Surface Mount Aluminum electrolytic —
A+ EEE1VA470WP (PAN)
 
— 1000 шт Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 35V, 20% +Tol, 20% -Tol, 47uF, Surface Mount, 2626 —
A+ EEEFH1V470XL (PAN)
 
— в ленте 900 шт
 
 V-FH / 35V / 47uF / 105°C / 7000h / 6.3x7.7mm / ripple 300mArms / ESR 0.45Ohm
A+ EEEFK1H470XP (PAN)
 
— в ленте 900 шт Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 50V, 20% +Tol, 20% -Tol, 47uF, Surface Mount, 2626 —
A+ EEETC1V470XP (PAN)
 
— в ленте 900 шт Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 35V, 20% +Tol, 20% -Tol, 47uF, Surface Mount, 2626 —
A+ CA050M0047REF-0810 (YAG)
 
— в ленте 500 шт конденсатор алюминиевый SMD 47 мкФ 50 В -40...85 °C 2000 ч Surface Mount Aluminum electrolytic —
A+ CA050M0047REH-0607 (YAG)
 

ECAPSMD 47/50V 0607 CA (YAG) 		— в ленте 1000 шт конденсатор алюминиевый SMD 47 мкФ 50 В -40...85 °C 2000 ч Surface Mount Aluminum electrolytic —
A+ JCK1H470M063077 (JB)
 
— в ленте 1000 шт — —
A+ JCK1V470M063058 (JB)
 
— 1000 шт — —
A+ EEEFT1H470AP (PAN)
 
— в ленте 1000 шт Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 50V, 20% +Tol, 20% -Tol, 47uF, Surface Mount, 2626 —
A+ EEEHD1H470P (PAN)
 
— 500 шт Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 50V, 20% +Tol, 20% -Tol, 47uF, Surface Mount, 4141 —
A+ EEEHD1V470AP (PAN)
 
— в ленте 500 шт Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 35V, 20% +Tol, 20% -Tol, 47uF, Surface Mount, 3333 —
A+ EEEHDV470XAP (PAN)
 
— 900 шт Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 35V, 20% +Tol, 20% -Tol, 47uF, Surface Mount, 2626 —
A+ EEEFK1H470P (PAN)
 
— в ленте 1000 шт конденсатор алюминиевый Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 50V, 20% +Tol, 20% -Tol, 47uF, Surface Mount, 3333 —
A+ EEE1HA470AP (PAN)
 
— 500 шт Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 50V, 20% +Tol, 20% -Tol, 47uF, Surface Mount, 4141 —
A+ EEE1HA470P (PAN)
 
— 500 шт Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 50V, 20% +Tol, 20% -Tol, 47uF, Surface Mount, 4141 —
A+ EEETC1V470XV (PAN)
 
— 900 шт
 
 Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 35V, 20% +Tol, 20% -Tol, 47uF, Surface Mount, 2626 —

Сопутствующие товары 8

показать свернуть
Наименование Корпус Упаковка Краткое описание Карточка
товара
595D476X9035R2T (VISHAY)
 
— в ленте 600 шт — —
597D476X9050Z2T (VISHAY)
 
— в ленте 250 шт
 
 —  
594D476X9035R2T (VISHAY)
 
— в ленте 600 шт Конденсатор танталовый 35 В 47 мкФ ±10% типоразмер SMD —  
TAJE476K035RNJ (AVX)
 
TANT73434373X43X43MM в ленте 400 шт Конденсатор танталовый TANT73434373X43X43MM  
T110D476K035AT (KEM)
 
— 1 шт Конденсатор танталовый —  
T491E476K035AT (KEM)
 
— в ленте 500 шт Конденсатор танталовый —  
T491X476K035AT (KEM)
 
— в ленте 500 шт Конденсатор танталовый 35 В 47 мкФ —  
T495X476K035ATE300 (KEM)
 
TANT73434373X43X43MM в ленте 500 шт Конденсатор танталовый TANT73434373X43X43MM  

Файлы 2

показать свернуть
Aluminum Electrolytic Capacitors Surface Mount Type FT series High temperature Lead-Free reflow Features ● ● ● ● Endurance：105 ℃ 2000 h to 5000 h Miniaturized, Low ESR (1 size smaller than series FK) AEC-Q200 compliant RoHS compliant Specifications Category temp. range Rated voltage range Capacitance range Capacitance tolerance Leakage current Dissipation factor (tan δ) Endurance Shelf life Resistance to soldering heat –55 ℃ to +105 ℃ 6.3 V to 50 V 10 μF to 2200 μF ±20 % (120 Hz / +20 ℃) I ≦ 0.01 CV（μA）After 2 minutes Please see the attached characteristics list After applying rated working voltage for 2000 hours at +105 ℃ ± 2 ℃ and then being stabilized at +20 ℃, capacitors shall meet the following limits. (Suffix “G” in 6.3 V : 3000 hours, 10 V to 50 V : 5000 hours) Capacitance change Within ±30 % of the initial value (Suffix “G” is ±35 %) Dissipation factor（tan δ) ≦ 200 % of the initial limit (Suffix “G” is ≦ 300 %) Leakage current Within the initial limit After storage for 1000 hours at +105 ℃ ± 2 ℃ with no voltage applied and then being stabilized at +20 ℃, capacitors shall meet the limits specified in endurance. (With voltage treatment) After reflow soldering and then being stabilized at +20 ℃, capacitors shall meet the following limits. Capacitance change Within ±10 % of the initial value Dissipation factor（tan δ) Within the initial limit Leakage current Within the initial limit Frequency correction factor for ripple current Freq.（Hz) Cap.（μF） 10 to 470 560 to 2200 120 1k 10 k 100 k to 0.65 0.70 0.85 0.90 0.95 0.95 1.00 1.00 Dimensions K Lot number R.voltage code 6.3 10 16 （P） L Unit：V E V H 25 35 50 （I） Series identification W Pressure Relief (ø10 and larger) Rated voltage code j A C B±0.2 Capacitance (μF) H øD±0.5 Negative polarity marking (–) 22 E FT A±0.2 0.3 max. Example：25 V 22 μF Marking color : BLACK （I） Marking （）Reference size Unit：mm Size code øD L A、B H I W P B 4.0 5.8±0.3 4.3 5.5 max. 1.8 0.65±0.1 1.0 0.35 K 1.5 0.35 +0.15 ー0.20 +0.15 ー0.20 +0.15 ー0.20 +0.15 ー0.20 C 5.0 5.8±0.3 5.3 6.5 max. 2.2 0.65±0.1 D 6.3 5.8±0.3 6.6 7.8 max. 2.6 0.65±0.1 1.8 0.35 D8 6.3 7.7±0.3 6.6 7.8 max. 2.6 0.65±0.1 1.8 0.35 8.0 10.2±0.3 8.3 10.0 max. 3.4 0.90±0.2 3.1 0.70±0.2 10.0 10.2±0.3 10.3 12.0 max. 3.5 0.90±0.2 4.6 0.70±0.2 F G ・The dimensions of the vibration-proof products, please refer to the page of the mounting specification. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 06-Dec-19 PDF
Документация на EEEFT1E101AP 

Series catalog

Дата модификации: 24.09.2021

Размер: 638.1 Кб

11 стр.

Aluminum Electrolytic Capacitors (SMD Type) Surface Mount Type Series : FT Type : V High temperature Lead-Free reflow Features ● Endurance : 105 °C 2000 h to 5000 h Low ESR (1 size smaller than series FK) ● Vibration-proof product is available upon request. (08 mm and larger) ● RoHS compliant ● Miniaturized, Specifications Category temperature range Rated voltage range Capacitance range Capacitance tolerance Leakage current Dissipation factor (tan d) Endurance Shelf life Resistance to soldering heat AEC-Q200 –55 °C to +105 °C 6.3 V.DC to 50 V.DC 10 μF to 2200 μF ±20 % (120 Hz/+20 °C) I < 0.01 CV (μA) After 2 minutes Please see the attached characteristics list After applying rated working voltage for 2000 hours at +105 °C±2 °C and then being stabilized at +20 °C, Capacitors shall meet the following limits. (Suffix “G” in 6.3 V.DC : 3000 hours, 10 V.DC to 50 V.DC : 5000 hours) Capacitance change Within ±30 % of the initial value (Suffix “G” is ±35 %) tan d < 200 % of the initial limit (Suffix “G” is < 300 %) DC leakage current Within the initial limit After storage for 1000 hours at +105 °C±2 °C with no voltage applied and then being stabilized at +20 °C, capacitors shall meet the limits specified in Endurance. (With voltage treatment) After reflow soldering and then being stabilized at +20 °C, capacitor shall meet the following limits. Capacitance change Within ±10 % of the initial value tan d Within the initial limit DC leakage current Within the initial limit AEC-Q200 compliant Frequency correction factor for ripple current Frequency (Hz) Capacitance (μF) 10 to 560 to 470 2200 120 1k 10 k 100 k to 0.65 0.70 0.85 0.90 0.95 0.95 1.00 1.00 22 E FT Capacitance (μF) L Series identification K A±0.2 (P) + W Pressure Relief (010 and larger) ( ) Reference size (Unit : mm) Rated voltage code Lot number R. Voltage 6.3 (V.DC) Code j H 0D±0.5 Negative polarity marking (–) – (I) 0.3 max. Example : 25 V.DC 22 μF Marking color : BLACK (I) Dimensions B±0.2 Marking 10 16 25 35 50 A C E V H Size H L A, B 0D code B 4.0 5.8±0.3 4.3 5.5 max. C 5.0 5.8±0.3 5.3 6.5 max. D 6.3 5.8±0.3 6.6 7.8 max. D8 6.3 7.7±0.3 6.6 7.8 max. F 8.0 10.2±0.3 8.3 10.0 max. G 10.0 10.2±0.3 10.3 12.0 max. I W P K 1.8 2.2 2.6 2.6 3.4 3.5 0.65±0.1 0.65±0.1 0.65±0.1 0.65±0.1 0.90±0.2 0.90±0.2 1.0 1.5 1.8 1.8 3.1 4.6 0.35 +- 0.15 0.20 0.35 +- 0.15 0.20 0.35 +- 0.15 0.20 0.35 +- 0.15 0.20 0.70±0.20 0.70±0.20 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 05 Apr. 2017 PDF
Документация на серию FT_SMD 

N_AEC_V-FTA_E.indd

Дата модификации: 27.03.2019

Размер: 89.7 Кб

4 стр.

    Внимание! Точность указанного на сайте описания товара не может быть гарантирована. Для получения более полной и точной информации о товаре смотрите техническое описание (Datasheet) на сайте производителя.

    MAL202117222E3 (VISHAY)