EEEHB1H100AP

Конденсатор алюминиевый 50 В x 10 мкФ ±20%, SMD, -40...105 °C, 2000 ч
развернуть ▼ свернуть ▲

Технические характеристики

показать свернуть
Ёмкость номинальная
Допуск по ёмкости
Напряжение номинальное
Температура рабочая
Срок службы
Диаметр корпуса
Высота корпуса
Способ монтажа
Ток пульсаций низких частот
Диаметр x Высота 6.3×6.3×6.6 мм
  Примечание: Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 50V, 20% +Tol, 20% -Tol, 10uF, Surface Mount, 2626
Нашли ошибку? Выделите её курсором и нажмите CTRL + ENTER

Аналоги 28

показать свернуть
Тип Наименование Корпус Упаковка i Ёмкость Допуск Напряжение Температура рабочая Срок службы Диаметр Высота Способ монтажа Шаг ESR Импеданс Ток пульсаций НЧ Ток пульсаций ВЧ Применение Примечание Карточка
товара
P= EEEHB1H100P (PAN)
 
1000 шт Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 50V, 20% +Tol, 20% -Tol, 10uF, Surface Mount, 2626
P- EEEHC1H100P (PAN)
 
1000 шт Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 50V, 20% +Tol, 20% -Tol, 10uF, Surface Mount, 2626
P- EEEHD1H100P (PAN)
 
в ленте 1000 шт Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 50V, 20% +Tol, 20% -Tol, 10uF, Surface Mount, 2625
A+ EEEFK1H100P (PAN)
 
в ленте 1000 шт Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 50V, 20% +Tol, 20% -Tol, 10uF, Surface Mount, 2626
A+ EEEFK1K100P (PAN)
 
в ленте 1000 шт Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 80V, 20% +Tol, 20% -Tol, 10uF, Surface Mount, 3333
A+ EEEFK1J100P (PAN)
 
в ленте 1000 шт Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 63V, 20% +Tol, 20% -Tol, 10uF, Surface Mount, 2626
A+ EEEFK1H100UR (PAN)
 
в ленте 1000 шт Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 50V, 20% +Tol, 20% -Tol, 10uF, Surface Mount, 2121
A+ EEHZA1H100R (PAN)
 
в ленте 1000 шт
A+ 50SVPF10M (PAN)
 
в ленте 1000 шт High Voltage / Large capacitance
A+ EEE2AA100UP (PAN)
 
в ленте 1000 шт Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 100V, 20% +Tol, 20% -Tol, 10uF, Surface Mount, 3333
A+ EEE1HA100WR (PAN)
 
в ленте 1000 шт Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 50V, 20% +Tol, 20% -Tol, 10uF, Surface Mount, 2121
A+ CK050M100E5APKKKV00R (SUSCON)
 
в ленте 1000 шт
A+ JCK1H100M063054 (JB)
 
в ленте 1000 шт Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 50V, 20% +Tol, 20% -Tol, 10uF, Surface Mount, 2626
A+ EEEFN2A100P (PAN)
 
в ленте 500 шт V-FN, 100V,10uF, 105°C, 2000h, 8x10.2mm, ripple 130mArms, 1.3Ohm
A+ EEHZA1J100P (PAN)
 
в ленте 1000 шт
A+ JCK1H100M050054 (JB)
 
в ленте 1000 шт Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 50V, 20% +Tol, 20% -Tol, 10uF, Surface Mount, 2121
A+ EEEFK1K100XP (PAN)
 
в ленте 900 шт Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 80V, 20% +Tol, 20% -Tol, 10uF, Surface Mount, 2626
A+ JCK2A100M080105 (JB)
 
в ленте 500 шт Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 100V, 20% +Tol, 20% -Tol, 10uF, Surface Mount, 3333
A+ EEH-ZC1J100V (PAN)
 
 
A+ JCK2A100M063054 (JB)
 
в ленте 1000 шт
A+ EEEHA2A100P (PAN)
 
500 шт Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 100V, 20% +Tol, 20% -Tol, 10uF, Surface Mount, 3333
A+ EEH-ZC1H100R (PAN)
 
 
A+ EEH-ZC1J100P (PAN)
 
 
A+ CK063M100E5APKKKV00R (SUSCON)
 
A+ CK050M100D5APKKKV00R (SUSCON)
 
A+ CH050M100E5APKKKV00R (SUSCON)
 
A+ CK100M100E7DPKKKV00R (SUSCON)
 
A+ EEHZA1J100V (PAN)
 
1000 шт

Сопутствующие товары 23

показать свернуть
Наименование Корпус Упаковка Краткое описание Карточка
товара
CA45-D050M106T (XIANGYEE)
 
TANT73433173X43X31MM в ленте 200 шт
 
TANT73433173X43X31MM
CA45-D050K106T (XIANGYEE)
 
TANT73433173X43X31MM в ленте 500 шт
 
TANT73433173X43X31MM
CA55-C050M106TE260 (XIANGYEE)
 
CA55-D063K106TE100 (XIANGYEE)
 
CA55-D050M106TE300 (XIANGYEE)
 
CA55-D050M106TE200 (XIANGYEE)
 
CA55-D050M106TE120 (XIANGYEE)
 
TANT73433173X43X31MM TANT73433173X43X31MM
CA55-D050M106TE100 (XIANGYEE)
 
CA55-D050M106TE090 (XIANGYEE)
 
TANT73433173X43X31MM TANT73433173X43X31MM
CA55-D050K106TE300 (XIANGYEE)
 
CA55-D050K106TE200 (XIANGYEE)
 
CA55-D050K106TE120 (XIANGYEE)
 
CA55-D050K106TE100 (XIANGYEE)
 
CA55-D050K106TE090 (XIANGYEE)
 
CA55-C050K106TE260 (XIANGYEE)
 
CA45L-E050M106TE400 (XIANGYEE)
 
TANT73434373X43X43MM
 
TANT73434373X43X43MM
CA45L-E050K106TE400 (XIANGYEE)
 
TANT73434373X43X43MM в ленте 500 шт
 
TANT73434373X43X43MM
CA45L-D050M106TE400 (XIANGYEE)
 
TANT73433173X43X31MM 1 шт
 
TANT73433173X43X31MM
CA45L-D050K106TE400 (XIANGYEE)
 
TANT73433173X43X31MM
 
TANT73433173X43X31MM
CA45-V050M106T (XIANGYEE)
 
TANT73613873X61X38MM
 
TANT73613873X61X38MM
CA45-V050K106T (XIANGYEE)
 
TANT73613873X61X38MM
 
TANT73613873X61X38MM
CA45-E050M106T (XIANGYEE)
 
TANT73434373X43X43MM
 
TANT73434373X43X43MM
CA45-E050K106T (XIANGYEE)
 
TANT73434373X43X43MM 1 шт
 
TANT73434373X43X43MM

Файлы 2

показать свернуть
Aluminum Electrolytic Capacitors (SMD Type) Surface Mount Type Series : HB Type : V High temperature Lead-Free reflow (suffix : A✽) Features ● Endurance : 105 °C 2000 h ● Vibration-proof product is available ● RoHS compliant upon request. (08 mm and larger) Specifications Category temperature range Rated voltage range Capacitance range Capacitance tolerance Leakage current Dissipation factor (tan d) Characteristics at low temperature Endurance Shelf life Resistance to soldering heat AEC-Q200 –40 °C to +105 °C 6.3 V.DC to 50 V.DC 1 µF to 1500 µF ±20 % (120 Hz/ +20 °C) I < 0.01 CV or 3 (µA) After 2 minutes (Whichever is greater) Please see the attached characteristics list V.DC 6.3 10 16 25 35 50 Z(–25 °C)/Z(+20 °C) 4 3 2 2 2 2 Standard Z(–40 °C)/Z(+20 °C) 8 6 4 4 3 3 (Impedance ratio at 120 Hz) Z(–25 °C)/Z(+20 °C) 4 3 2 2 2 2 Miniaturization product Z(–40 °C)/Z(+20 °C) 10 8 6 6 4 4 After applying rated working voltage for 2000 hours at +105 °C±2 °C and then being stabilized at +20 °C, capacitors shall meet the following limits. Within ±20 % of the initial value (16 V.DC or less : Capacitance change Within ±25 %, Miniaturization product : Within ±35 %) tan d < 200 % of the initial limit DC leakage current Within the initial limit After storage for 1000 hours at +105 °C±2 °C with no voltage applied and then being stabilized at +20 °C, capacitors shall meet the limits specified in Endurance. (With voltage treatment) After reflow soldering and then being stabilized at +20 °C, capacitors shall meet the following limits. Capacitance change Within ±10 % of the initial value tan d Within the initial limit DC leakage current Within the initial limit AEC-Q200 compliant Frequency correction factor for ripple current Frequency (Hz) 50, 60 120 1k 10 k to Correction factor 0.70 1.00 1.30 1.70 L Series identification Mark for Lead-Free products (Black dot) Rated voltage code (P) W ( )reference size (Unit : mm) Lot number R. Voltage 6.3 (V.DC) Code j + Pressure Relief (010 and larger) (I) 22 j HB Capacitance (µF) H 0D±0.5 Negative polarity marking (–) A±0.2 – K 0.3 max. Example : 6.3 V.DC 22 µF Marking color : BLACK (I) Dimensions B±0.2 Marking 10 16 25 35 50 A C E V H Size L A, B H code 0D B 4.0 5.8±0.3 4.3 5.5 max. C 5.0 5.8±0.3 5.3 6.5 max. D 6.3 5.8±0.3 6.6 7.8 max. D8 6.3 7.7±0.3 6.6 7.8 max. E 8.0 6.2±0.3 8.3 9.5 max. F 8.0 10.2±0.3 8.3 10.0 max. G 10.0 10.2±0.3 10.3 12.0 max. I W 1.8 2.2 2.6 2.6 3.4 3.4 3.5 0.65±0.1 0.65±0.1 0.65±0.1 0.65±0.1 0.65±0.1 0.90±0.2 0.90±0.2 P K 1.0 0.35 +- 0.15 0.20 1.5 0.35 +- 0.15 0.20 1.8 0.35 +- 0.15 0.20 1.8 0.35 +- 0.15 0.20 2.2 0.35 +- 0.15 0.20 3.1 0.70±0.20 4.6 0.70±0.20 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 04 Mar. 2016 PDF
Документация на серию HB(A)_SMD 

N_AEC_V-HBA_E.indd

Дата модификации: 27.03.2019

Размер: 95.6 Кб

4 стр.

Aluminum Electrolytic Capacitors (SMD Type) Surface Mount Type Series : HB Type : V High temperature Lead-Free reflow (suffix : A✽) Features ● Endurance : 105 °C 2000 h ● Vibration-proof product is available ● RoHS compliant upon request. (08 mm and larger) Specifications Category temperature range Rated voltage range Capacitance range Capacitance tolerance Leakage current Dissipation factor (tan d) Characteristics at low temperature Endurance Shelf life Resistance to soldering heat AEC-Q200 –40 °C to +105 °C 6.3 V.DC to 50 V.DC 1 µF to 1500 µF ±20 % (120 Hz/ +20 °C) I < 0.01 CV or 3 (µA) After 2 minutes (Whichever is greater) Please see the attached characteristics list V.DC 6.3 10 16 25 35 50 Z(–25 °C)/Z(+20 °C) 4 3 2 2 2 2 Standard Z(–40 °C)/Z(+20 °C) 8 6 4 4 3 3 (Impedance ratio at 120 Hz) Z(–25 °C)/Z(+20 °C) 4 3 2 2 2 2 Miniaturization product Z(–40 °C)/Z(+20 °C) 10 8 6 6 4 4 After applying rated working voltage for 2000 hours at +105 °C±2 °C and then being stabilized at +20 °C, capacitors shall meet the following limits. Within ±20 % of the initial value (16 V.DC or less : Capacitance change Within ±25 %, Miniaturization product : Within ±35 %) tan d < 200 % of the initial limit DC leakage current Within the initial limit After storage for 1000 hours at +105 °C±2 °C with no voltage applied and then being stabilized at +20 °C, capacitors shall meet the limits specified in Endurance. (With voltage treatment) After reflow soldering and then being stabilized at +20 °C, capacitors shall meet the following limits. Capacitance change Within ±10 % of the initial value tan d Within the initial limit DC leakage current Within the initial limit AEC-Q200 compliant Frequency correction factor for ripple current Frequency (Hz) 50, 60 120 1k 10 k to Correction factor 0.70 1.00 1.30 1.70 L Series identification Mark for Lead-Free products (Black dot) Rated voltage code (P) W ( )reference size (Unit : mm) Lot number R. Voltage 6.3 (V.DC) Code j + Pressure Relief (010 and larger) (I) 22 j HB Capacitance (µF) H 0D±0.5 Negative polarity marking (–) A±0.2 – K 0.3 max. Example : 6.3 V.DC 22 µF Marking color : BLACK (I) Dimensions B±0.2 Marking 10 16 25 35 50 A C E V H Size L A, B H code 0D B 4.0 5.8±0.3 4.3 5.5 max. C 5.0 5.8±0.3 5.3 6.5 max. D 6.3 5.8±0.3 6.6 7.8 max. D8 6.3 7.7±0.3 6.6 7.8 max. E 8.0 6.2±0.3 8.3 9.5 max. F 8.0 10.2±0.3 8.3 10.0 max. G 10.0 10.2±0.3 10.3 12.0 max. I W 1.8 2.2 2.6 2.6 3.4 3.4 3.5 0.65±0.1 0.65±0.1 0.65±0.1 0.65±0.1 0.65±0.1 0.90±0.2 0.90±0.2 P K 1.0 0.35 +- 0.15 0.20 1.5 0.35 +- 0.15 0.20 1.8 0.35 +- 0.15 0.20 1.8 0.35 +- 0.15 0.20 2.2 0.35 +- 0.15 0.20 3.1 0.70±0.20 4.6 0.70±0.20 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 04 Mar. 2016 PDF
Документация на EEEHB1H100P 

N_AEC_V-HBA_E.indd

Дата модификации: 07.04.2016

Размер: 71.3 Кб

3 стр.

    Внимание! Точность указанного на сайте описания товара не может быть гарантирована. Для получения более полной и точной информации о товаре смотрите техническое описание (Datasheet) на сайте производителя.