EEEHBH470YAP

Конденсатор алюминиевый 50 В x 47 мкФ ±20%, SMD, -40...105 °C, 2000 ч
развернуть ▼ свернуть ▲

Технические характеристики

показать свернуть
Ёмкость номинальная
Допуск по ёмкости
Напряжение номинальное
Температура рабочая
Срок службы
Диаметр корпуса
Высота корпуса
Способ монтажа
Ток пульсаций низких частот
Диаметр x Высота 6.3×6.3×6.6 мм
  Примечание: Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 50V, 20% +Tol, 20% -Tol, 47uF, Surface Mount, 2626
Нашли ошибку? Выделите её курсором и нажмите CTRL + ENTER

Аналоги 26

показать свернуть
Тип Наименование Корпус Упаковка i Ёмкость Допуск Напряжение Температура рабочая Срок службы Диаметр Высота Способ монтажа Шаг ESR Импеданс Ток пульсаций НЧ Ток пульсаций ВЧ Применение Примечание Карточка
товара
P- EEEHA1H470XP (PAN)
 
в линейках 900 шт Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 50V, 20% +Tol, 20% -Tol, 47uF, Surface Mount, 2626
P- EEEHAH470XAP (PAN)
 
900 шт Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 50V, 20% +Tol, 20% -Tol, 47uF, Surface Mount, 2626
A+ CD100M470G10PKKKV00R (SUSCON)
 
в ленте 500 шт
A+ EEEFK1H470XP (PAN)
 
в ленте 900 шт Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 50V, 20% +Tol, 20% -Tol, 47uF, Surface Mount, 2626
A+ EEEFK1H470P (PAN)
 
в ленте 1000 шт конденсатор алюминиевый Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 50V, 20% +Tol, 20% -Tol, 47uF, Surface Mount, 3333
A+ EEHZC1K470P (PAN)
 
в ленте 500 шт
A+ CGS063M470F10PKKKV00R (SUSCON)
 
в ленте 500 шт
A+ CD050M470E7DPKKKV00R (SUSCON)
 
в ленте 1000 шт
A+ CK050M470F6BPKKKV00R (SUSCON)
 
в ленте 1000 шт
A+ EEEFK2A470AQ (PAN)
 
200 шт Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 100V, 20% +Tol, 20% -Tol, 47uF, Surface Mount, 5353
A+ CDL100M470XDBPKKKV00R (SUSCON)
 
в ленте 250 шт
A+ JCK1H470M063077 (JB)
 
в ленте 1000 шт
A+ EEEFK1K470P (PAN)
 
в ленте 500 шт Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 80V, 20% +Tol, 20% -Tol, 47uF, Surface Mount, 4141
A+ EEE1HA470AP (PAN)
 
500 шт Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 50V, 20% +Tol, 20% -Tol, 47uF, Surface Mount, 4141
A+ EEEFN1K470UP (PAN)
 
в ленте 500 шт V-FN, 80V, 47uF, 105°C, 2000h, 8x10.2mm, ripple 130mArms, 1.3Ohm
A+ EEEFK1J470P (PAN)
 
в ленте 500 шт Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 63V, 20% +Tol, 20% -Tol, 47uF, Surface Mount, 3333
A+ EEEHA2A470UP (PAN)
 
в ленте 500 шт Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 100V, 20% +Tol, 20% -Tol, 47uF, Surface Mount, 4141
A+ EEVTG2A470Q (PAN)
 
200 шт Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 100V, 20% +Tol, 20% -Tol, 47uF, Surface Mount, 5353
A+ EEEFT1H470AP (PAN)
 
в ленте 1000 шт Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 50V, 20% +Tol, 20% -Tol, 47uF, Surface Mount, 2626
A+ CH050M470E7DPKKKV00R (SUSCON)
 
A+ CG063M470F10PKKKV00R (SUSCON)
 
A+ CK050M470E7DPKKKV00R (SUSCON)
 
A+ EEE1HA470XP (PAN)
 
в ленте 900 шт Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 50V, 20% +Tol, 20% -Tol, 47uF, Surface Mount, 2626
A+ EEVFK2A470Q (PAN)
 
в ленте 200 шт Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 100V, 20% +Tol, 20% -Tol, 47uF, Surface Mount, 5353
A+ JCK2A470M100105 (JB)
 
в ленте 500 шт
A+ EEE1HA470P (PAN)
 
в ленте 500 шт Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 50V, 20% +Tol, 20% -Tol, 47uF, Surface Mount, 4141

Файлы 2

показать свернуть
Aluminum Electrolytic Capacitors Surface Mount Type HB series High temperature Lead-Free reflow (suffix : A✽) Features ● ● ● ● Endurance : 105 ℃ 2000 h Vibration-proof product (30G guaranteed) is available upon request. (ø8 ≦) AEC-Q200 compliant RoHS compliant Specifications Category temp. range Rated voltage range Capacitance range Capacitance tolerance Leakage current Dissipation factor (tan δ) Characteristics at low temperature Endurance Shelf life Resistance to soldering heat –40 ℃ to +105 ℃ 6.3 V to 50 V 1 μF to 1500 μF ±20 % (120 Hz / +20 ℃) I ≦ 0.01 CV or 3 (μA) After 2 minutes (Whichever is greater) Please see the attached characteristics list Rated voltage (V) 6.3 10 16 25 35 50 Standard Z (-25 ℃) / Z (+20 ℃) 4 3 2 2 2 2 Z (-40 ℃) / Z (+20 ℃) 8 6 4 4 3 3 (Impedance ratio at 120 Hz) Miniaturization Z (-25 ℃) / Z (+20 ℃) 4 3 2 2 2 2 product Z (-40 ℃) / Z (+20 ℃) 10 8 6 6 4 4 After applying rated working voltage for 2000 h at +105 ℃ ± 2 ℃ and then being stabilized at +20 ℃, capacitors shall meet the following limits. Within ±20 % of the initial value Capacitance change (16 V or less :Within ±25 %, Miniaturization product : Within ±35 %) Dissipation factor (tan δ) ≦200 % of the initial limit Leakage current Within the initial limit After storage for 1000 h at +105 ℃ ± 2 ℃ with no voltage applied and then being stabilized at +20 ℃, capacitors shall meet the limits specified in endurance. (With voltage treatment) After reflow soldering and then being stabilized at +20 ℃, capacitors shall meet the following limits. Capacitance change Within ±10 % of the initial value Dissipation factor (tan δ) Within the initial limit Leakage current Within the initial limit Frequency correction factor for ripple current Frequency(Hz) Correction factor 50, 60 0.70 10 k to 1.70 Dimensions 0.3 max. A±0.2 (P) B±0.2 Capacitance (μF) H Negative polarity marking (–) øD±0.5 K Example : 6.3 V 22 μF Marking color : BLACK Series indentification W L Mark for Lead-Free (I) 22 j HB 1k 1.30 Pressure Relief(ø10and larger) ( )Reference size products (Black dot) Unit:mm Size code Lot number R. voltage code j A C 6.3 10 16 (I) Marking 120 1.00 Rated voltage code E V H Unit:V 25 35 50 B C D D8 E F G øD L A, B 4.0 5.8±0.3 4.3 5.0 5.8±0.3 5.3 6.3 5.8±0.3 6.6 6.3 7.7±0.3 6.6 8.0 6.2±0.3 8.3 8.0 10.2±0.3 8.3 10.0 10.2±0.3 10.3 H I W P K 5.5 max. 6.5 max. 7.8 max. 7.8 max. 9.5 max. 10.0 max. 12.0 max. 1.8 2.2 2.6 2.6 3.4 3.4 3.5 0.65±0.1 0.65±0.1 0.65±0.1 0.65±0.1 0.65±0.1 0.90±0.2 0.90±0.2 1.0 1.5 1.8 1.8 2.2 3.1 4.6 0.35 -0.20 +0.15 0.35 -0.20 +0.15 0.35 -0.20 +0.15 0.35 -0.20 +0.15 0.35 -0.20 0.70±0.2 0.70±0.2 +0.15 ・The dimensions of the vibration-proof products, please refer to the page of the mounting specification. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 06-Dec-19 PDF
Документация на EEEHB0J220AR 

Series catalog

Дата модификации: 24.09.2021

Размер: 649.9 Кб

11 стр.

Aluminum Electrolytic Capacitors (SMD Type) Surface Mount Type Series : HB Type : V High temperature Lead-Free reflow (suffix : A✽) Features ● Endurance : 105 °C 2000 h ● Vibration-proof product is available ● RoHS compliant upon request. (08 mm and larger) Specifications Category temperature range Rated voltage range Capacitance range Capacitance tolerance Leakage current Dissipation factor (tan d) Characteristics at low temperature Endurance Shelf life Resistance to soldering heat AEC-Q200 –40 °C to +105 °C 6.3 V.DC to 50 V.DC 1 µF to 1500 µF ±20 % (120 Hz/ +20 °C) I < 0.01 CV or 3 (µA) After 2 minutes (Whichever is greater) Please see the attached characteristics list V.DC 6.3 10 16 25 35 50 Z(–25 °C)/Z(+20 °C) 4 3 2 2 2 2 Standard Z(–40 °C)/Z(+20 °C) 8 6 4 4 3 3 (Impedance ratio at 120 Hz) Z(–25 °C)/Z(+20 °C) 4 3 2 2 2 2 Miniaturization product Z(–40 °C)/Z(+20 °C) 10 8 6 6 4 4 After applying rated working voltage for 2000 hours at +105 °C±2 °C and then being stabilized at +20 °C, capacitors shall meet the following limits. Within ±20 % of the initial value (16 V.DC or less : Capacitance change Within ±25 %, Miniaturization product : Within ±35 %) tan d < 200 % of the initial limit DC leakage current Within the initial limit After storage for 1000 hours at +105 °C±2 °C with no voltage applied and then being stabilized at +20 °C, capacitors shall meet the limits specified in Endurance. (With voltage treatment) After reflow soldering and then being stabilized at +20 °C, capacitors shall meet the following limits. Capacitance change Within ±10 % of the initial value tan d Within the initial limit DC leakage current Within the initial limit AEC-Q200 compliant Frequency correction factor for ripple current Frequency (Hz) 50, 60 120 1k 10 k to Correction factor 0.70 1.00 1.30 1.70 L Series identification Mark for Lead-Free products (Black dot) Rated voltage code (P) W ( )reference size (Unit : mm) Lot number R. Voltage 6.3 (V.DC) Code j + Pressure Relief (010 and larger) (I) 22 j HB Capacitance (µF) H 0D±0.5 Negative polarity marking (–) A±0.2 – K 0.3 max. Example : 6.3 V.DC 22 µF Marking color : BLACK (I) Dimensions B±0.2 Marking 10 16 25 35 50 A C E V H Size L A, B H code 0D B 4.0 5.8±0.3 4.3 5.5 max. C 5.0 5.8±0.3 5.3 6.5 max. D 6.3 5.8±0.3 6.6 7.8 max. D8 6.3 7.7±0.3 6.6 7.8 max. E 8.0 6.2±0.3 8.3 9.5 max. F 8.0 10.2±0.3 8.3 10.0 max. G 10.0 10.2±0.3 10.3 12.0 max. I W 1.8 2.2 2.6 2.6 3.4 3.4 3.5 0.65±0.1 0.65±0.1 0.65±0.1 0.65±0.1 0.65±0.1 0.90±0.2 0.90±0.2 P K 1.0 0.35 +- 0.15 0.20 1.5 0.35 +- 0.15 0.20 1.8 0.35 +- 0.15 0.20 1.8 0.35 +- 0.15 0.20 2.2 0.35 +- 0.15 0.20 3.1 0.70±0.20 4.6 0.70±0.20 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 04 Mar. 2016 PDF
Документация на серию HB(A)_SMD 

N_AEC_V-HBA_E.indd

Дата модификации: 27.03.2019

Размер: 95.6 Кб

4 стр.

    Внимание! Точность указанного на сайте описания товара не может быть гарантирована. Для получения более полной и точной информации о товаре смотрите техническое описание (Datasheet) на сайте производителя.