Серия AC-DC сетевых преобразователей RD-65

MEAN WELL

Общие характеристики

 Раздел AC-DC сетевые преобразователи
Напряжение 1 канала
Выходной ток 1 канала
Тип стабилизации
Вход
Конструктивное исполнение
Возможности
Типы защиты КЗ, перегрузка, перенапряжение
Количество выходов
Тип управления выходом
Исполнение
Входное напряжение AC
Входное напряжение DC
Коэффициент мощности
Напряжение изоляции вход-выход
Напряжение изоляции вход-земля
Напряжение изоляции выход-земля
Применение
Шум
Размер 129×98×38 мм
Рабочая температура

Документация на серию RD-65

RD-65 65W Dual Output Switching Power Supply series User’s Manual ■ Features : Universal AC input / Full range Protections: Short circuit / Overload / Over voltage Cooling by free air convection LED indicator for power on 100% full load burn-in test All using 105℃ long life electrolytic capacitors Withstand 300VAC surge input for 5 second High operating temperature up to 70℃ Withstand 5G vibration test High efficiency, long life and high reliability 3 years warranty Bauar t gepruft Sicherheit egel ma ge od o s be wac g SPECIFICATION www. tuv.com ID 2000000000 UL62368-1 MODEL OUTPUT INPUT RD-65A TPTC004 RD-65B CH1 CH2 CH1 CH2 DC VOLTAGE 5V 12V 5V 24V RATED CURRENT 6A 3A 4A 2A 0 ~ 4A 0 ~ 8A 0 ~ 3A 120mVp-p 80mVp-p 150mVp-p CH1: 4.75 ~ 5.5V VOLTAGE TOLERANCE Note.3 ±2.0% ±6.0% CH1: 4.75 ~ 5.5V ±2.0% +4,-8% LINE REGULATION Note.4 ±0.5% ±1.5% ±0.5% ±2.0% LOAD REGULATION Note.5 ±0.5% ±3.0% ±0.5% ±6.0% CURRENT RANGE Note.6 0 ~ 8A RATED POWER Note.6 66W 68W RIPPLE & NOISE (max.) Note.2 80mVp-p VOLTAGE ADJ. RANGE SETUP, RISE TIME 500ms, 20ms/230VAC HOLD UP TIME (Typ.) 60ms/230VAC VOLTAGE RANGE 88 ~ 264VAC FREQUENCY RANGE 47 ~ 63Hz EFFICIENCY(Typ.) 78% AC CURRENT (Typ.) INRUSH CURRENT (Typ.) 2A/115VAC 1.2A/230VAC COLD START 50A/230VAC OVERLOAD PROTECTION OVER VOLTAGE WORKING TEMP. WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION SAFETY STANDARDS SAFETY & WITHSTAND VOLTAGE ISOLATION RESISTANCE EMC (Note 7) EMC EMISSION EMC IMMUNITY MTBF DIMENSION PACKING NOTE IEC62368-1 OUTPUT NUMBER LEAKAGE CURRENT OTHERS BS EN/EN62368-1 1200ms, 30ms/115VAC at full load 14ms/115VAC at full load 125 ~ 373VDC (Withstand 300VAC surge for 5sec. Without damage) 77% <2mA / 240VAC 110 ~ 150% rated output power Protection type : Hiccup mode, recovers automatically after fault condition is removed CH1: 5.75 ~ 6.75V Protection type : Hiccup mode, recovers automatically after fault condition is removed -25 ~ +70℃ (Refer to "Derating Curve") 20 ~ 90% RH non-condensing -40 ~ +85℃, 10 ~ 95% RH ±0.03%/℃ (0 ~ 50℃)on +5V output 10 ~ 500Hz, 5G 10min./1cycle, period for 60min. each along X, Y, Z axes UL62368-1, TUV BS EN/EN62368-1, EAC TP TC 004 approved I/P-O/P:3KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25℃/ 70% RH Compliance to BS EN/EN55032 (CISPR32) Class B, BS EN/EN61000-3-2,-3, EAC TP TC 020 Compliance to BS EN/EN61000-4-2,3,4,5,6,8,11, BS EN/EN61000-6-2 (BS EN/EN50082-2), heavy industry level, criteria A, EAC TP TC 020 265.9Khrs min. MIL-HDBK-217F (25℃) 129*98*38mm (L*W*H) 0.44Kg; 30pcs/14.2Kg/0.72CUFT 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation, when multi-channel output, it is recommended that CH1 load > 10%. 4. Line regulation is measured from low line to high line at rated load. 5. Load regulation is measured from 20% to 100% rated load, and other output at 60% rated load. 6. Each output can work within current range. But total output power can't exceed rated output power. 7. The power supply is considered a component which will be installed into a final equipment. All the EMC tests are been executed by mounting the unit on a 360mm*360mm metal plate with 1mm of thickness. The final equipment must be re-confirmed that it still meets EMC directives. For guidance on how to perform these EMC tests, please refer to “EMI testing of component power supplies.” (as available on http://www.meanwell.com) 8. The ambient temperature derating of 3.5℃/1000m with fanless models and of 5℃/1000m with fan models for operating altitude higher than 2000m(6500ft). ※ Product Liability Disclaimer：For detailed information, please refer to https://www.meanwell.com/serviceDisclaimer.aspx File Name:RD-65-SPEC 2021-09-16 PDF
Документация на RD-65B 

RD-65-20210915.cdr

Дата модификации: 28.09.2021

Размер: 98.1 Кб

2 стр.

RD-65 65W Dual Output Switching Power Supply series Features : Universal AC input / Full range Protections:Short circuit/Over load/Over voltage Cooling by free air convection LED indicator for power on 100% full load burn-in test All using 105 long life electrolytic capacitors Withstand 300VAC surge input for 5 second High operating temperature up to 70 Withstand 5G vibration test High efficiency, long life and high reliability 3 years warranty SPECIFICATION MODEL OUTPUT INPUT RD-65A RD-65B OUTPUT NUMBER CH1 CH2 CH1 DC VOLTAGE 5V 12V 5V 24V RATED CURRENT 6A 3A 4A 2A 0.2 ~ 4A 0.3 ~ 8A 0.2 ~ 3A CURRENT RANGE Note.6 0.3 ~ 8A RATED POWER Note.6 66W CH2 68W RIPPLE & NOISE (max.) Note.2 80mVp-p 120mVp-p VOLTAGE ADJ. RANGE CH1: 4.75 ~ 5.5V VOLTAGE TOLERANCE Note.3 2.0% 6.0% 80mVp-p 150mVp-p CH1: 4.75 ~ 5.5V 2.0% +4,-6% LINE REGULATION Note.4 0.5% 1.5% 0.5% 2.0% LOAD REGULATION Note.5 0.5% 3.0% 0.5% 4.0% SETUP, RISE TIME 500ms, 20ms/230VAC HOLD TIME (Typ.) 60ms/230VAC VOLTAGE RANGE 88 ~ 264VAC FREQUENCY RANGE 47 ~ 63Hz EFFICIENCY(Typ.) 79% AC CURRENT (Typ.) INRUSH CURRENT (Typ.) 2A/115VAC 1.2A/230VAC COLD START 40A/230VAC LEAKAGE CURRENT 1200ms, 30ms/115VAC at full load 14ms/115VAC at full load 125 ~ 373VDC (Withstand 300VAC surge for 5sec. Without damage) 78% <2mA / 240VAC 110 ~ 150% rated output power OVER LOAD PROTECTION OVER VOLTAGE WORKING TEMP. WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION SAFETY STANDARDS WITHSTAND VOLTAGE Protection type : Hiccup mode, recovers automatically after fault condition is removed CH1: 5.75 ~ 6.75V Protection type : Hiccup mode, recovers automatically after fault condition is removed -25 ~ +70 (Refer to output load derating curve) 20 ~ 90% RH non-condensing -40 ~ +85 , 10 ~ 95% RH 0.03%/ (0 ~ 50 )on +5V output 10 ~ 500Hz, 5G 10min./1cycle, period for 60min. each along X, Y, Z axes UL60950-1, TUV EN60950-1 Approved I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC SAFETY & ISOLATION RESISTANCE I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC EMI CONDUCTION & RADIATION Compliance to EN55022 (CISPR22) Class B EMC (Note 7) OTHERS HARMONIC CURRENT Compliance to EN61000-3-2,-3 EMS IMMUNITY MTBF Compliance to EN61000-4-2,3,4,5,6,8,11; ENV50204, EN61000-6-2 (EN50082-2) heavy industry level, criteria A DIMENSION PACKING NOTE 265.9Khrs min. MIL-HDBK-217F (25 129*98*38mm (L*W*H) 0.44Kg; 30pcs/14.2Kg/0.72CUFT ) 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. Line regulation is measured from low line to high line at rated load. 5. Load regulation is measured from 20% to 100% rated load, and other output at 60% rated load. 6. Each output can work within current range. But total output power can't exceed rated output power. 7. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. File Name:RD-65-SPEC 2005-09-13 PDF
Документация на серию RD-65 

RD-65.cdr

Дата модификации: 01.10.2005

Размер: 425 Кб

2 стр.

    Товары серии RD-65

    Наименование i Упаковка P вых Выход КПД
    RD-65A (MW)
     
    		AC-DC сетевой преобразователь - P вых: 66 Вт; Выход: 5 В, 12 В; U1: 4.75...5.5 В; I1: 0... в коробках 30 шт
    RD-65B (MW)
     
    		AC-DC сетевой преобразователь - P вых: 68 Вт; Выход: 5 В, 24 В; U1: 4.75...5.5 В; I1: 0... в коробках 30 шт

    RD-65 публикации

    22 апреля 2025
    статья

    AP8262WSE-A1 – доступная альтернатива популярным ШИМ-контроллерам

    Дмитрий Илларионов (Нижний Новгород) ШИМ–контроллер AP8262WSE–A1 с токовым управлением и фиксированной частотой преобразования от китайской компании Chipown – полный (и бюджетный) качественный аналог популярных изделий семейства... ...читать

    05 ноября 2024
    новость

    Продукция компании YCCFAN для систем вентиляции и охлаждения

    В промышленном, офисном, телекоммуникационном и серверном оборудовании, бытовой технике и медицинских приборах, электронике транспортных средств, системах светодиодного освещения и прочих сферах, где требуется активное охлаждение или вентиляция,... ...читать

    23 марта 2023
    статья

    Диоды и диодные мосты SUNCO – рациональный выбор для любых приложений

    Константин Кузьминов (г. Заполярный) Китайская компания SUNCO занимается полным циклом производства полупроводников. Ее продукция отличается широким разнообразием и при этом соответствует мировым стандартам. Выпрямительные и сигнальные диоды,... ...читать

    07 марта 2023
    новость

    АC/DC- и DC/DC-контроллеры, драйверы ключей и другие компоненты Chipown на складе КОМПЭЛ

    Wuxi Chipown Micro–electronics Ltd. (Chipown) – инновационная и высокотехнологичная китайская компания, основанная в 2005 году и занимающаяся разработкой драйверов и микросхем управления питанием. Chipown стал пионером в успешной разработке... ...читать