Серия DC-AC инверторов TS-400

MEAN WELL

Общие характеристики

 Раздел DC-AC инверторы
Выходная мощность
Форма выходного напряжения
Размер 205×158×67 мм

Документация на серию TS-400

Инвертор TS-200/400 инструкция по эксплуатации -0- PDF
Инструкция 

Дата модификации: 22.10.2024

Размер: 244.4 Кб

11 стр.

TS-400 400W True Sine Wave DC-AC Power Inverter series ■ Features : True sine wave output (THD<3%) High surge power up to 800W High efficiency up to 88.5% Thermostatically controlled cooling fan Built-in remote ON-OFF control Front panel indicator for operation status Power ON-OFF switch Protections: Bat. low alarm / Bat. low shutdown / Over voltage / Over temp. / Output short / Input reverse polarity / Overload Application : Home appliance, power tools, office and portable equipment, vehicle and yacht ...etc. 3 years warranty E13 TPTC004 SPECIFICATION TS-400-112 MODEL NO. INPUT TS-400-148 TS-400-212 TS-400-224 TS-400-248 = B, C, D RATED POWER 400W MAXIMUM OUTPUT POWER 460W for 180 sec. / 600W for 10 sec. / surge power 800W for 30 cycles(typ.) Factory setting set at 110VAC AC VOLTAGE OUTPUT TS-400-124 = A, E, F IEC62368-1 (for 212/224/248 only) Factory setting set at 230VAC 100 / 110 / 115 / 120VAC selectable by setting button S.W FREQUENCY Note.6 60±0.1Hz WAVEFORM Note.2 True sine wave (THD<3%) AC REGULATION Note.2 ±3.0% at rated input voltage 50/60Hz selectable by setting button 200 / 220 / 230 / 240VAC selectable by setting button S.W 50±0.1Hz 50/60Hz selectable by setting button FRONT PANEL INDICATOR Operation status ; Green : normal, Orange(flashing) : remote control OFF, Red : abnormal BAT. VOLTAGE 12V 24V 48V 12V 24V 48V VOLTAGE RANGE (Typ.) Note.3 10.5 ~ 15VDC DC CURRENT (Typ.) 40A 21 ~ 30VDC 20A 42 ~ 60VDC 10A 10.5 ~ 15VDC 40A 21 ~ 30VDC 20A 42 ~ 60VDC 10A NO LOAD CURRENT DRAW (Typ.) 1.25A 0.63A 0.32A 1.25A 0.63A 0.32A 87% 86% 87.5% 88.5% OFF MODE CURRENT DRAW ≦1mA EFFICIENCY (Typ.) Note.1 84.5% BATTERY TYPES FUSE BATTERY BAT. LOW ALARM INPUT PROTECTION BAT. LOW SHUTDOWN BAT. POLARITY OVER TEMPERATURE OUTPUT SHORT OUTPUT PROTECTION OVER LOAD (Typ.) GFCI PROCTECTION FUNCTION REMOTE CONTROL ENVIRONMENT 40A*1 22.5±4% 20A*1 45±4% 40A*2 11.3±4% 40A*1 22.5±4% 20A*1 45±4% 10.5±4% 21±4% 42±4% 10.5±4% 21±4% 42±4% 75℃± 5℃ 70℃± 5℃ 85℃± 5℃ 75℃± 5℃ 70℃± 5℃ By internal fuse open 85℃± 5℃ Protection type : Shut down o/p voltage, re-power on to recover; by internal RTH1 detect power transistor Protection type : Shut down o/p voltage, re-power on to recover 105 ~ 115% load for 180 sec., 115% ~ 150% load for 10 sec. Protection type : Shut down o/p voltage, re-power on to recover Optional (Only type F) Open : Normal work ; Short : Remote off -10 ~ +40℃ @ 100% load ; +60℃ @ 50% load 20% ~ 90% RH non-condensing STORAGE TEMP., HUMIDITY VIBRATION -30 ~ +70℃ / -22 ~ +158oF, 10 ~ 95% RH non-condensing WITHSTAND VOLTAGE SAFETY & ISOLATION RESISTANCE EMC EMC EMISSION NOTE 40A*2 11.3±4% WORKING TEMP. WORKING HUMIDITY SAFETY STANDARDS OTHERS 86% Open & sealed Lead Acid None 10 ~ 500Hz, 3G 10min./1cycle, 60min. each along X, Y, Z axes IEC62368-1 CB, EAC TP TC 004 approved, EAC TP TC 004 approved, Design refer to UL458, Design refer to BS EN/EN62368-1 BS EN/EN62368-1 Bat. I/P - AC O/P:3.0KVAC AC O/P - FG:1.5KVAC Bat. I/P-AC O/P, Bat. I/P-FG, AC O/P-FG:100M Ohms / 500VDC / 25℃/ 70% RH Compliance to BS EN/EN55032 class A, 72/ 245/ CEE, Compliance to FCC class A, EAC TP TC 020 95/ 54/ CE, E-Mark, EAC TP TC 020 EMC IMMUNITY MTBF Compliance to EAC TP TC 020 DIMENSION PACKING 205*158*67mm (L*W*H) 1.73Kg; 6pcs/11.4Kg/1.55CUFT 104.7K hrs min. Compliance to BS EN/EN61000-4-2,3,8, EAC TP TC 020 MIL-HDBK-217F (25℃) 1.Efficiency is tested by 300W, linear load at 13V/26V/52V input voltage. 2.AC regulation and THD are tested by 400W, linear load at 13V/26V/52V input voltage. 3.The tolerance of each voltage value by models is:112/212→±0.5V;124/224→±1V;148/248→±2V. 4.All parameters not specified above are measured at rated load, 25℃ of ambient temperature and set to factory setting. 5.The ambient temperature derating of 3.5℃/1000m with fanless models and of 5℃/1000m with fan models for operating altitude higher than 2000m(6500ft). 6.Type F for 60Hz only. ※ Product Liability Disclaimer：For detailed information, please refer to https://www.meanwell.com/serviceDisclaimer.aspx File Name:TS-400-SPEC 2021-06-28 PDF
Документация на TS-400-124A 

TS-400-20210628.cdr

Дата модификации: 18.08.2021

Размер: 86 Кб

2 стр.

TS-400 400W True Sine Wave DC-AC Power Inverter series Features : True sine wave output (THD<3%) High surge power up to 800W High efficiency up to 88.5% Thermostatically controlled cooling fan Built-in remote ON-OFF control Front panel indicator for operation status Power ON-OFF switch Protections: Bat. low alarm / Bat. low shutdown / Over voltage / Over temp. / Output short / Input reverse polarity / Overload Application : Home appliance, power tools, office and portable equipment, vehicle and yacht ...etc. 2 years warranty E13 SPECIFICATION MODEL 460W for 180 sec. / 600W for 10 sec. / surge power 800W for 30 cycles(typ.) Factory setting set at 110VAC Factory setting set at 230VAC 200 / 220 / 230 / 240VAC selectable by setting button S.W 60 0.1Hz 50 0.1Hz WAVEFORM True sine wave (THD<3%) at rated input voltage typ. 50/60Hz selectable by setting button 50/60Hz selectable by setting button 3.0%, at rated input voltage FRONT PANEL INDICATOR Operation status ; Green : normal, Orange(flashing) : remote control OFF, Red : abnormal BAT. VOLTAGE 12V 24V 48V 12V 24V 48V VOLTAGE RANGE (Typ.) DC CURRENT (Typ.) 10.5 ~ 15VDC 40A 21 ~ 30VDC 20A 42 ~ 60VDC 10A 10.5 ~ 15VDC 40A 21 ~ 30VDC 20A 42 ~ 60VDC 10A 0.63A 0.32A 1.25A 0.63A 0.32A 87% 86% 87.5% 88.5% NO LOAD CURRENT DRAW typ. 1.25A EFFICIENCY (Typ.) 1mA 86% Open & sealed Lead Acid Note.1 84.5% FUSE BATTERY BAT. LOW ALARM INPUT PROTECTION BAT. LOW SHUTDOWN BAT. POLARITY OVER TEMPERATURE OUTPUT SHORT OUTPUT PROTECTION OVER LOAD (Typ.) GFCI PROCTECTION FUNCTION REMOTE CONTROL 40A*2 11.3 4% 40A*1 22.5 4% 20A*1 45 4% 40A*2 11.3 4% 40A*1 22.5 4% 20A*1 45 4% 10.5 4% 21 4% 42 4% 10.5 4% 21 4% 42 4% 85 75 By internal fuse open 85 5 75 5 5 5 70 5 Protection type : Shut down o/p voltage, re-power on to recover Protection type : Shut down o/p voltage, re-power on to recover Optional (Only type F) Open : Normal work ; Short : Remote off STORAGE TEMP., HUMIDITY VIBRATION -30 ~ +70 None @ 50% load o / -22 ~ +158 F, 10 ~ 95% RH 10 ~ 500Hz, 3G 10min./1cycle, 60min. each along X, Y, Z axes None Design refer to UL458 None Bat I/P - AC O/P:3.0KVAC EN60950-1 AC O/P - FG:1.5KVAC Bat I/P-AC O/P, AC O/P-FG:100M Ohms / 500VDC / 25 EMI CONDUCTION&RADIATION Compliance to FCC class A None EMS IMMUNITY DIMENSION PACKING 5 105 ~ 115% load for 180 sec., 115% ~ 150% load for 10 sec. -10 ~ +40 @ 100% load ; +60 20% ~ 90% RH non-condensing LVD SAFETY & WITHSTAND VOLTAGE EMC ISOLATION RESISTANCE 70 Protection type : Shut down o/p voltage, re-power on to recover; by internal RTH1 detect power transistor WORKING TEMP. WORKING HUMIDITY SAFETY STANDARDS NOTE TS-400-248 FREQUENCY BATTERY TYPES OTHERS TS-400-224 100 / 110 / 115 / 120VAC selectable by setting button S.W OFF MODE CURRENT DRAW ENVIRONMENT TS-400-212 MAXIMUM OUTPUT POWER AC REGULATION INPUT TS-400-148 400W AC VOLTAGE OUTPUT TS-400-124 TS-400-112 RATED POWER / 70% RH Compliance to EN55022 class A, 72/ 245/ CEE, 95/ 54/ CE, E-Mark Compliance to EN61000-4-2,3,8 ENV50204 205*158*67mm (L*W*H) 1.73Kg; 6pcs/11.4Kg/1.55CUFT 1.Efficiency is tested by 300W, linear load at 12V/24V/48V input voltage. 2.All parameters not specified above are measured at rated load, 25 of ambient temperature. File Name:TS-400-SPEC 2009-07-22 PDF
Документация на TS-400-112A 

TS-400.cdr

Дата модификации: 10.09.2009

Размер: 360.6 Кб

2 стр.

TS-400 400W True Sine Wave DC-AC Power Inverter series Features : True sine wave output (THD<3%) High surge power up to 800W High efficiency up to 88.5% Thermostatically controlled cooling fan Built-in remote ON-OFF control Front panel indicator for operation status Power ON-OFF switch Protections: Bat. low alarm / Bat. low shutdown / Over voltage / Over temp. / Output short / Input reverse polarity / Overload Application : Home appliance, power tools, office and portable equipment, vehicle and yacht ...etc. 2 years warranty E13 SPECIFICATION MODEL 460W for 180 sec. / 600W for 10 sec. / surge power 800W for 30 cycles(typ.) Factory setting set at 110VAC Factory setting set at 230VAC 200 / 220 / 230 / 240VAC selectable by setting button S.W 60 0.1Hz 50 0.1Hz WAVEFORM True sine wave (THD<3%) at rated input voltage typ. 50/60Hz selectable by setting button 50/60Hz selectable by setting button 3.0%, at rated input voltage FRONT PANEL INDICATOR Operation status ; Green : normal, Orange(flashing) : remote control OFF, Red : abnormal BAT. VOLTAGE 12V 24V 48V 12V 24V 48V VOLTAGE RANGE (Typ.) DC CURRENT (Typ.) 10.5 ~ 15VDC 40A 21 ~ 30VDC 20A 42 ~ 60VDC 10A 10.5 ~ 15VDC 40A 21 ~ 30VDC 20A 42 ~ 60VDC 10A 0.63A 0.32A 1.25A 0.63A 0.32A 87% 86% 87.5% 88.5% NO LOAD CURRENT DRAW typ. 1.25A EFFICIENCY (Typ.) 1mA 86% Open & sealed Lead Acid Note.1 84.5% FUSE BATTERY BAT. LOW ALARM INPUT PROTECTION BAT. LOW SHUTDOWN BAT. POLARITY OVER TEMPERATURE OUTPUT SHORT OUTPUT PROTECTION OVER LOAD (Typ.) GFCI PROCTECTION FUNCTION REMOTE CONTROL 40A*2 11.3 4% 40A*1 22.5 4% 20A*1 45 4% 40A*2 11.3 4% 40A*1 22.5 4% 20A*1 45 4% 10.5 4% 21 4% 42 4% 10.5 4% 21 4% 42 4% 85 75 By internal fuse open 85 5 75 5 5 5 70 5 Protection type : Shut down o/p voltage, re-power on to recover Protection type : Shut down o/p voltage, re-power on to recover Optional (Only type F) Open : Normal work ; Short : Remote off STORAGE TEMP., HUMIDITY VIBRATION -30 ~ +70 None @ 50% load o / -22 ~ +158 F, 10 ~ 95% RH 10 ~ 500Hz, 3G 10min./1cycle, 60min. each along X, Y, Z axes None Design refer to UL458 None Bat I/P - AC O/P:3.0KVAC EN60950-1 AC O/P - FG:1.5KVAC Bat I/P-AC O/P, AC O/P-FG:100M Ohms / 500VDC / 25 EMI CONDUCTION&RADIATION Compliance to FCC class A None EMS IMMUNITY DIMENSION PACKING 5 105 ~ 115% load for 180 sec., 115% ~ 150% load for 10 sec. -10 ~ +40 @ 100% load ; +60 20% ~ 90% RH non-condensing LVD SAFETY & WITHSTAND VOLTAGE EMC ISOLATION RESISTANCE 70 Protection type : Shut down o/p voltage, re-power on to recover; by internal RTH1 detect power transistor WORKING TEMP. WORKING HUMIDITY SAFETY STANDARDS NOTE TS-400-248 FREQUENCY BATTERY TYPES OTHERS TS-400-224 100 / 110 / 115 / 120VAC selectable by setting button S.W OFF MODE CURRENT DRAW ENVIRONMENT TS-400-212 MAXIMUM OUTPUT POWER AC REGULATION INPUT TS-400-148 400W AC VOLTAGE OUTPUT TS-400-124 TS-400-112 RATED POWER / 70% RH Compliance to EN55022 class A, 72/ 245/ CEE, 95/ 54/ CE, E-Mark Compliance to EN61000-4-2,3,8 ENV50204 205*158*67mm (L*W*H) 1.73Kg; 6pcs/11.4Kg/1.55CUFT 1.Efficiency is tested by 300W, linear load at 12V/24V/48V input voltage. 2.All parameters not specified above are measured at rated load, 25 of ambient temperature. File Name:TS-400-SPEC 2009-07-22 PDF
Документация на серию TS-400 

TS-400.cdr

Дата модификации: 10.09.2009

Размер: 360.6 Кб

2 стр.

    Товары серии TS-400

    Наименование i Упаковка U вх U вых T раб
    TS-400-112A (MW)
     
    		—
    TS-400-112F (MW)
     
    		—
    TS-400-124A (MW)
     
    		1 шт —
    TS-400-124F (MW)
     
    		—
    TS-400-148A (MW)
     
    		—
    TS-400-148F (MW)
     
    		— — —
    TS-400-212B (MW)
     
    		DC-AC 1 шт
    TS-400-212D (MW)
     
    		— — —
    TS-400-224B (MW)
     
    		DC-AC инвертор - P вых: 400 Вт; U вх: 24 В; U вых: 230 В; Форма: чистый синус; 205x158x... в коробках 6 шт
    TS-400-224D (MW)
     
    		—
    TS-400-248B (MW)
     
    		DC-AC инвертор - P вых: 400 Вт; U вх: 48 В; U вых: 230 В; Форма: чистый синус; 205x158x... 1 шт

    TS-400 публикации

    17 декабря
    статья

    Силовые полупроводниковые компоненты SUNCO для индустриальных источников питания

    Компоненты SUNCO идеально подходят для создания мощных индустриальных источников питания, в том числе – работающих в сложных температурных условиях. Компания предлагает двунаправленные супрессоры для входных цепей, диоды для выпрямительных мостов,... ...читать

    22 июля 2024
    статья

    Инструкция по работе с программаторами NFC и DALI/DMX для светодиодных драйверов MOSO

    Компания Компэл предлагает складские и заказные подставки качественных светодиодных драйверов для индустриального, бытового, торгового, офисного и сценического освещения производства компании MOSO. В качестве дополнения к статьям об этих драйверах... ...читать

    03 мая 2023
    новость

    Компоненты JSCJ для устройств быстрой зарядки – простая схемотехника и соответствие стандартам по ЭМС

    Соответствуя требованиям стремительно развивающегося рынка зарядных устройств и постоянно совершенствую свои технологии, компания Jiangsu Changjing Technology Co., Ltd. (JSCJ) предлагает новые решения: выпрямляющие диоды, стабилитроны,... ...читать

    06 июля 2021
    новость

    Держим старые цены на MEAN WELL весь июль!

    С 1 июля компания MEAN WELL в связи со сложной ситуацией на рынке электронных компонентов вынужденно повышает стоимость и сроки поставки продукции. Компэл для поддержки российских производителей замораживает на весь июль старые цены на широкий ряд... ...читать