CEN-60-12

ИП для светодиодного освещения: 60 Вт; 5000 мА / 12 В (стаб. по току или напр.); вход: 90…264 В; IP66
развернуть ▼ свернуть ▲
 
 

Технические характеристики

показать свернуть
Тип преобразователя
Мощность выходная
Диапазон выходных напряжений
Диапазон выходных токов
Напряжение сети/входное номинальное
Режим стабилизации
Тип диммирования
Исполнение конструктивное
Степень защиты (IP)
Подстройка выходных параметров
Диапазон входных напряжений (AC)
Диапазон входных напряжений (DC)
Напряжение изоляции вход-выход
Количество выходов
Коэффициент мощности
Эффективность
Функция защиты КЗ, перегрузка, перенапряжение, перегрев
Температура рабочая
Размер 185×62.5×40.5 мм
Применение
Нашли ошибку? Выделите её курсором и нажмите CTRL + ENTER

Файлы 2

показать свернуть
CEN-60 60W Single Output LED Power Supply series ■ Features : ‧Universal AC input / Full range (up to 295VAC) ‧Protections: Short circuit / Over current / Over voltage / Over temperature ‧Output voltage and constant current level adjustable ‧Built-in active PFC function ‧IP66 design for indoor or outdoor installations ‧Class 2 power unit ‧Cooling by free air convection ‧100% full load burn-in test ‧High reliability ‧Suitable for LED lighting and moving sign applications ‧Compliance to worldwide safety regulations for lighting ‧Suitable for dry / damp / wet locations ‧3 years warranty IS 15885(Part 2/Sec13) 110 M M SPECIFICATION DC VOLTAGE R-41027766 www.tuv.com ID 2000000000 (for 36V,48V,54V only) CEN-60-12 CEN-60-15 CEN-60-20 CEN-60-24 CEN-60-30 CEN-60-36 CEN-60-42 CEN-60-48 12V 15V 20V 24V 30V 36V 42V 48V 54V 11.25 ~ 15V 15 ~ 20V 18 ~ 24V 22.5 ~ 30V 27 ~ 36V 31.5 ~ 42V 36 ~ 48V 40.5 ~ 54V CONSTANT CURRENT REGION Note.5 9 ~ 12V CEN-60-54 RATED CURRENT 5A 4A 3A 2.5A 2A 1.7A 1.45A 1.3A 1.15A CURRENT RANGE 0 ~ 5A 0 ~ 4A 0 ~ 3A 0 ~ 2.5A 0 ~ 2A 0 ~ 1.7A 0 ~ 1.45A 0 ~ 1.3A 0 ~ 1.15A RATED POWER 60W 60W 60W 60W 60W 61.2W 60.9W 62.4W 62.1W 2.4Vp-p 1.8Vp-p 2.4Vp-p 3Vp-p 3.6Vp-p 4Vp-p 4.6Vp-p 5Vp-p VOLTAGE ADJ. RANGE (SVR1) 10.8 ~ 13.5V 13.5 ~ 17V 17 ~ 22V 22 ~ 27V 27 ~ 33V 33 ~ 40V 37 ~ 46V 43 ~ 53V 49 ~ 58V CURRENT ADJ. RANGE(SVR2) 3.75 ~ 5A 2.3 ~ 3A 1.9 ~ 2.5A 1.5 ~ 2A 1.3 ~ 1.7A 1.1 ~ 1.45A 1 ~ 1.3A 0.9 ~ 1.15A RIPPLE & NOISE (max.) Note.2 2Vp-p OUTPUT IP66 (CCC optional) MODEL Bauar t gepruft Sicherheit egel ma ge od o s be wac g THOMAS SAMUEL THOMAS SAMUEL SELV 3 ~ 4A LINE REGULATION ±3.0% LOAD REGULATION ±5.0% SETUP TIME VOLTAGE RANGE 500ms / 230VAC 1200ms / 115VAC at full load Note.4 90 ~ 295VAC FREQUENCY RANGE 47 ~ 63Hz POWER FACTOR (Typ.) PF>0.97/115VAC, PF>0.95/230VAC, PF>0.9/277VAC at full load (Please refer to "Power Factor Characteristic" curve) TOTAL HARMONIC DISTORTION EFFICIENCY (Typ.) THD< 20% when output loading≧75% at 115VAC/230VAC input and output loading≧80% at 277VAC input 86% 87% 88% 89% 90% 90% 90% 91% AC CURRENT (Typ.) INRUSH CURRENT (Typ.) 0.8A/115VAC 0.4A/230VAC 0.3A/277VAC COLD START 45A(twidth=85μs measured at 50% Ipeak) at 230VAC MAX. No. of PSUs on 16A CIRCUIT BREAKER 32 units (circuit breaker of type B) / 32 units (circuit breaker of type C) at 230VAC LEAKAGE CURRENT OVER CURRENT SHORT CIRCUIT PROTECTION OVER VOLTAGE OVER TEMPERATURE EMC NOTE <0.75mA / 240VAC Protection type : Constant current limiting, recovers automatically after fault condition is removed Hiccup mode, recovers automatically after fault condition is removed 14.5 ~ 17V 17.5 ~ 21V 22.8 ~ 26V 28 ~ 34V 34 ~ 38V 41 ~ 46V 47 ~ 52V 54 ~ 60V 59 ~ 65V Protection type : Shut down o/p voltage, re-power on to recover Shut down o/p voltage, re-power on to recover -30 ~ +70℃ (Refer to "Derating Curve") WORKING HUMIDITY 20 ~ 95% RH non-condensing -40 ~ +80℃, 10 ~ 95% RH ±0.03%/℃ (0 ~ 50℃) VIBRATION 10 ~ 500Hz, 5G 12min./1cycle, period for 72min. each along X, Y, Z axes SAFETY STANDARDS UL879, UL8750, CSA C22.2 No. 207-M89, CSA C22.2 No. 250.0-08, TUV EN61347-1, EN61347-2-13, IP66, J61347-1, J61347-2-13, BIS IS15885(for 36V,48V,54V only), EAC TP TC 004 , GB19510.1,GB19510.14 approved WITHSTAND VOLTAGE ISOLATION RESISTANCE EMC EMISSION EMC IMMUNITY MTBF OTHERS 91% 95 ~ 110% WORKING TEMP. ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT SAFETY & 127 ~ 417VDC ND INPUT NR VOLTAGE TOLERANCE Note.3 ±10% DIMENSION PACKING I/P-O/P:3.75KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25℃/ 70% RH Compliance to EN55015, EN61000-3-2 Class C (≧75% load) ; EN61000-3-3, GB17743 and GB17625.1, EAC TP TC 020 Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024, EN61547, light industry level (surge 4KV), criteria B, EAC TP TC 020 523.4Khrs min. MIL-HDBK-217F (25℃) 185*62.5*40.5mm (L*W*H) 0.6Kg;24pcs/15.4Kg/1.29CUFT 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. Derating may be needed under low input voltage. Please check the static characteristics for more details. 5. Please refer to "DRIVING METHODS OF LED MODULE". 6. The power supply is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected by the complete installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again. 7. Direct connecting to LEDs is suggested, but is not suitable for using additional drivers. 8. To fulfill requirements of the latest ErP regulation for lighting fixtures, this LED power supply can only be used behind a switch without permanently connected to the mains. 9.The ambient temperature derating of 3.5℃/1000m with fanless models and of 5℃/1000m with fan models for operating altitude higher than 2000m(6500ft). File Name:CEN-60-SPEC 2018-05-15 PDF
Документация на CEN-60-54 

CEN-60.cdr

Дата модификации: 02.07.2019

Размер: 715.4 Кб

3 стр.

CEN-60 60W Single Output LED Power Supply series ½ Features : Universal AC input / Full range (up to 295VAC) Protections: Short circuit / Overload / Over voltage / Over temperature Output voltage and constant current level adjustable Built-in active PFC function IP66 design for indoor or outdoor installations Cooling by free air convection 100% full load burn-in test High reliability Suitable for LED lighting and moving sign applications Compliance to worldwide safety regulations for lighting Suitable for dry / damp / wet location or outdoor application 3 years warranty F 110 M M SELV SPECIFICATION MODEL DC VOLTAGE CEN-60-12 CEN-60-15 CEN-60-20 CEN-60-24 CEN-60-30 CEN-60-36 CEN-60-42 CEN-60-48 CEN-60-54 12V 15V 20V 24V 30V 36V 42V 48V 54V CONSTANT CURRENT OPERATION VOLTAGE Note.5 9 ~ 12V 5A RATED CURRENT 18 ~ 24V 22.5 ~ 30V 27 ~ 36V 31.5 ~ 42V 36 ~ 48V 40.5 ~ 54V 2.5A 2A 1.7A 1.45A 1.3A 1.15A 0 ~ 1.15A 0 ~ 5A 0 ~ 4A 0 ~ 3A 0 ~ 2.5A 0 ~ 2A 0 ~ 1.7A 0 ~ 1.45A 0 ~ 1.3A 60W 60W 60W 60W 60W 61.2W 60.9W 62.4W 62.1W 2.4Vp-p 1.8Vp-p 2.4Vp-p 3Vp-p 3.6Vp-p 4Vp-p 4.6Vp-p 5Vp-p VOLTAGE ADJ. RANGE (SVR1) 10.8 ~ 13.5V 13.5 ~ 17V 17 ~ 22V 22 ~ 27V 27 ~ 33V 33 ~ 40V 37 ~ 46V 43 ~ 53V 49 ~ 58V CURRENT ADJ. RANGE(SVR2) 3.75 ~ 5A 2.3 ~ 3A 1.9 ~ 2.5A 1.5 ~ 2A 1.3 ~ 1.7A 1.1 ~ 1.45A 1 ~ 1.3A 0.9 ~ 1.15A 91% 91% 54 ~ 60V 59 ~ 65V VOLTAGE TOLERANCE Note.3 10% LINE REGULATION 3.0% VOLTAGE RANGE 3 ~ 4A 5.0% 1400ms / 230VAC 2800ms / 115VAC at full load SETUP TIME Note.4 90 ~ 295VAC 127 ~ 417VDC FREQUENCY RANGE 47 ~ 63Hz POWER FACTOR PF 0.9 at 75 ~ 100% load, 115VAC / 230VAC ; PF>0.97 / 115VAC EFFICIENCY(Typ.) 86% AC CURRENT INRUSH CURRENT(max.) 0.8A/115VAC 45A/230VAC LEAKAGE CURRENT <0.75mA / 240VAC OVER CURRENT SHORT CIRCUIT PROTECTION 15 ~ 20V 3A RATED POWER LOAD REGULATION INPUT 11.25 ~ 15V 4A CURRENT RANGE RIPPLE & NOISE (max.) Note.2 2Vp-p OUTPUT IP66 OVER VOLTAGE OVER TEMPERATURE 87% 88% PF>0.95 / 230VAC at full load 90% 90% 90% 0.4A/230VAC 95 ~ 110% Protection type : Constant current limiting, recovers automatically after fault condition is removed Hiccup mode, recovers automatically after fault condition is removed 14.5 ~ 17V 17.5 ~ 21V 22.8 ~ 26V 28 ~ 34V 34 ~ 38V 41 ~ 46V 47 ~ 52V Protection type : Shut down o/p voltage, re-power on to recover 85 10 (TSW1) detect on heatsink of power transistor Protection type : Shut down o/p voltage, re-power on to recover WORKING TEMP. -30 ~ +70 WORKING HUMIDITY 20 ~ 95% RH non-condensing ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT 89% (Refer to output load derating curve) -40 ~ +80 , 10 ~ 95% RH 0.03%/ (0 ~ 50 ) VIBRATION 10 ~ 500Hz, 5G 12min./1cycle, period for 72min. each along X, Y, Z axes SAFETY STANDARDS TUV EN61347-1, EN61347-2-13, IP66 approved WITHSTAND VOLTAGE I/P-O/P:3.75KVAC I/P-FG:1.88KVAC O/P-FG:0.5KVAC I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25 / 70% RH ISOLATION RESISTANCE SAFETY & EMI CONDUCTION & RADIATION Compliance to EN55015 EMC Compliance to EN61000-3-2 Class C ( 75% load) ; EN61000-3-3 HARMONIC CURRENT EMS IMMUNITY MTBF OTHERS NOTE DIMENSION PACKING Compliance to EN61000-4-2,3,4,5,6,8,11; ENV50204, EN55024, EN61547, light industry level (surge 4KV), criteria A 523.4Khrs min. MIL-HDBK-217F (25 183*62.5*40.5mm (L*W*H) 0.56Kg;24pcs/14.4Kg/1.11CUFT ) 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. Direct connecting to LEDs is not suggested for models with “RIPPLE & NOISE” > 10% and using additional drivers is highly recommended. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. Derating may be needed under low input voltage. Please check the static characteristics for more details. 5. Constant current operation region is within 75% ~100% rated output voltage. This is the suitable operation region for LED related applications, but please reconfirm special electrical requirements for some specific system design. 6. The power supply is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected by the complete installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again. File Name:CEN-60-SPEC 2010-05-05 PDF
Документация на серию CEN-60 

CEN-60.cdr

Дата модификации: 05.05.2010

Размер: 234.8 Кб

3 стр.

    Внимание! Точность указанного на сайте описания товара не может быть гарантирована. Для получения более полной и точной информации о товаре смотрите техническое описание (Datasheet) на сайте производителя.